Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.21
The WAGO 231-337/001-000 is a high-quality 7-pole straight male PCB header designed to provide secure and reliable pluggable electrical connections in industrial automation, control electronics and printed circuit board assemblies. As part of the established WAGO 231 Series MCS MIDI Classic connector range, it offers a compact and dependable connection solution for equipment manufacturers, PCB designers and industrial automation engineers.
Featuring a through-hole technology (THT) mounting arrangement, this male header is designed for permanent soldered installation onto printed circuit boards. Its straight 1.0 × 1.0 mm solder pins provide reliable electrical connections between PCB circuits and compatible female pluggable connectors. The shrouded insulating housing protects the contact arrangement, while integrated coding fingers and anti-rotation features support correct alignment and secure mating within compatible WAGO MCS MIDI Classic connector assemblies.
With a 7-pole configuration, 5.08 mm pin spacing and an IEC rated current of 12 A, the WAGO 231-337/001-000 is suitable for industrial control, power distribution and electronic equipment interconnection applications. The header has a rated voltage of 320 V under IEC overvoltage category III, pollution degree 3 conditions, and 630 V under category II, pollution degree 2 conditions. Its compact orange polyamide housing and tin-plated copper contacts make it suitable for reliable PCB-to-wire connections in industrial environments.
Male PCB headers such as the WAGO 231-337/001-000 provide an efficient way to connect printed circuit boards to external wiring through detachable female connectors. The header is permanently soldered to the PCB, while a compatible female connector provides the removable wiring interface. This modular arrangement simplifies equipment assembly, supports pre-wired connector installation and allows electrical modules to be disconnected for maintenance when safely isolated.
The WAGO MCS MIDI Classic 231 Series is designed for reliable industrial electrical interconnections. Its 5.08 mm pitch, robust polyamide housing and tin-plated contacts provide a practical interface for industrial PCB assemblies. The WAGO 231-337/001-000 can be used with compatible 7-pole female connectors, including selected CAGE CLAMP® versions such as the WAGO 231-307/026-000. Integrated coding fingers allow optional coding keys to help prevent incorrect connections, while anti-rotation protection assists with mechanical alignment. The header itself is a soldered PCB component and does not contain conductor clamping terminals. As the MCS system is not intended for load breaking, the connector must not be connected or disconnected while live or under load, and exposed header contacts must not remain energised when unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 7 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 Series / MCS MIDI Classic | |
| Model | 231-337/001-000 | |
| Product type | Male PCB header / pluggable connector header | |
| Connector type | Male connector / plug | |
| Contact configuration | Shrouded male pins | |
| Number of electrical potentials | 7 | |
| Number of connection types | 1 | |
| Number of connection levels | 1 | |
| Number of contact rows | 1 | |
| Pin spacing | 5.08 mm | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1977) | 10 A | |
| PCB contact technology | Through-hole technology (THT) | |
| Termination method | Solder connection | |
| Solder pin arrangement | In-line across the connector | |
| Solder pins per potential | 1 | |
| Solder pin dimensions | 1.0 × 1.0 mm | |
| Solder pin length | 5 mm | |
| Recommended PCB drilled hole diameter | 1.4 mm (+0.1 mm tolerance) | |
| Header orientation | Straight / vertical | |
| Mating direction relative to PCB | 90° | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Integral mismating protection | No | |
| Insulating material | Polyamide 66 (PA66) | |
| Material group | I | |
| Flammability classification | UL 94 V-0 | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Width | 38.68 mm | |
| Height | 17 mm | |
| Height above PCB surface | 12 mm | |
| Depth | 8.4 mm | |
| Dimensions (W × H × D) | 38.68 × 17 × 8.4 mm | |
| Weight | Approx. 2.3 g | |
| Fire load | 0.042 MJ | |
| Temperature limit range | -60 to +100 °C | |
| Processing temperature | -35 to +60 °C | |
| Mounting type | PCB through-hole solder mounting | |
| Connector arrangement | Single-row, 7-position | |
| Relevant standards and approvals | IEC/EN 61984, UL 1059, UL 1977 and CSA | |
| RoHS compliance | Compliant | |
| Country of origin | Poland | |
| GTIN / EAN | 4044918865425 | |
| Product group | WAGO Multi Connection System | |
| Application | Industrial PCB connections, automation equipment, control electronics and modular electrical assemblies |
The WAGO 231-337/001-000 is a 7-pole male PCB header used to establish detachable electrical connections between printed circuit boards and compatible female connectors. It is designed for industrial automation equipment, electronic control systems, machinery and PCB assemblies.
The connector uses through-hole technology (THT) with seven straight solder pins measuring 1.0 × 1.0 mm and extending 5 mm from the header. The pins are inserted into appropriately positioned PCB holes and soldered to establish permanent electrical connections. The recommended drilled hole diameter is 1.4 mm with a positive tolerance of 0.1 mm.
The connector has an IEC rated current of 12 A and a rated voltage of 320 V under overvoltage category III, pollution degree 3 conditions. Under overvoltage category II, pollution degree 2 conditions, the rated voltage is 630 V. Its rated impulse voltage is 4 kV. The applicable electrical ratings depend on the complete connector assembly and installation conditions.
The header is designed for compatible 7-pole WAGO MCS MIDI Classic female connectors with 5.08 mm pin spacing. Suitable counterparts include selected WAGO 231 Series female connectors, such as the 231-307/026-000, along with compatible 232 Series variants. The mating configuration and any coding requirements should be checked before installation.
The straight male header design provides a compact, vertically mating connection interface for PCB assemblies. Its THT solder pins provide secure board termination, while the pluggable connection arrangement simplifies modular equipment installation and maintenance. The integrated coding fingers, anti-rotation protection and tin-plated copper contacts contribute to reliable industrial electrical connectivity.
WAGO MCS MIDI Classic connectors provide dependable PCB interconnection solutions for industrial automation, electronic equipment and machinery manufacturing. The WAGO 231-337/001-000 combines a compact 7-pole straight male header design, through-hole solder mounting, 5.08 mm pin spacing and robust tin-plated electrical contacts to support reliable PCB-to-wire connectivity and efficient equipment integration.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.