Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.6885
The WAGO 231-334/001-000 is a 4-pole straight through-hole (THT) male PCB header from the established WAGO MCS MIDI Classic 231 Series. Designed for dependable printed circuit board connections, this connector provides a compact, pluggable interface between electronic equipment and compatible female cable connectors.
Featuring a 5.08 mm pin spacing, 1 × 1 mm square solder pins and a durable orange polyamide housing, the WAGO 231-334/001-000 is suitable for industrial control electronics, automation equipment and PCB-based electrical assemblies. Its straight solder-pin arrangement enables vertical mounting on a printed circuit board using conventional through-hole soldering techniques.
With an IEC rated current of 12 A and a rated voltage of up to 630 V under specified IEC insulation conditions, this male header provides a reliable connection interface for suitable industrial applications. Its tin-plated electrolytic copper contacts, compact dimensions and compatibility with appropriately matched WAGO MCS MIDI Classic female connectors make it a practical choice for equipment manufacturers and electronic engineers.
The WAGO MCS MIDI Classic Series provides a modular pluggable connection system for industrial electronic equipment, control systems and PCB assemblies. The range includes male PCB headers and compatible female connectors, allowing manufacturers to create detachable electrical interfaces between printed circuit boards and external wiring.
The WAGO 231-334/001-000 uses four straight, tin-plated solder pins arranged at a 5.08 mm pitch. Its through-hole mounting design supports conventional PCB soldering processes, while the shrouded contact arrangement helps guide compatible female connectors during mating. With a width of just 23.44 mm and a height of 17 mm, the header offers a compact connection solution for industrial electronic assemblies.
Unlike the female cable connectors in the MCS MIDI Classic range, this male header does not incorporate CAGE CLAMP® conductor terminals. Electrical connection to the PCB is made through soldered pins, while external wiring is connected using a separately selected compatible female plug. WAGO MCS connectors are not intended for load-breaking operation and must not be connected or disconnected while energised or under load. Circuit design should also ensure that accessible header pins are not live when unmated.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 4 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Manufacturer part number | 231-334/001-000 | |
| Product type | Straight THT male PCB header | |
| Connector gender | Male | |
| Total number of potentials | 4 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Pin spacing | 5.08 mm | |
| PCB connection technology | Through-hole technology (THT) | |
| Termination method | Soldering | |
| Header orientation | Straight / vertical | |
| Mating direction relative to PCB | 90° | |
| Solder pin dimensions | 1 × 1 mm | |
| Solder pin length | 5 mm | |
| Recommended PCB hole diameter | 1.4 mm (+0.1 mm tolerance) | |
| Number of solder pins per potential | 1 | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Rated current (UL 1059, Use Group B) | 10 A | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1977) | 10 A | |
| Rated voltage (UL 1977) | 600 V | |
| Contact material | Electrolytic copper (ECu) | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Temperature limit range | −60 to +100 °C | |
| Width | 23.44 mm | |
| Height | 17 mm | |
| Height above PCB surface | 12 mm | |
| Depth | 8.4 mm | |
| Dimensions (W × H × D) | 23.44 × 17 × 8.4 mm | |
| Weight | Approx. 1.372 g | |
| Plug-in locking mechanism | Without | |
| Mismating protection | No dedicated mismating protection | |
| Mounting method | PCB through-hole solder mounting | |
| GTIN | 4044918865296 |
The WAGO 231-334/001-000 is a 4-pole straight male PCB header designed to provide a pluggable electrical connection between a printed circuit board and a compatible WAGO MCS MIDI Classic female connector.
The connector has 4 poles, providing four independent electrical contact positions in a single-row arrangement.
The header has a 5.08 mm pin spacing, equivalent to 0.2 inches, for compatibility with appropriately matched WAGO MCS MIDI Classic connectors.
The header uses through-hole technology (THT) and is mounted by inserting its straight solder pins into the PCB and soldering them in place. The pins measure 1 × 1 mm and have a length of 5 mm.
The WAGO 231-334/001-000 has an IEC rated current of 12 A and a rated voltage of up to 630 V under overvoltage category II, pollution degree 2 conditions. Under IEC category III conditions, the rated voltage is 320 V.
No. This product is a male PCB header with solder pins, rather than a female cable connector with spring pressure conductor terminals. It is designed to mate with a compatible female connector from the WAGO MCS MIDI Classic range.
The manufacturer's dimensional specification gives a 1.4 mm drilled hole diameter with a +0.1 mm tolerance for the square solder pins. The PCB footprint should be checked against the manufacturer's drawing before production.
The header measures 23.44 mm wide, 17 mm high and 8.4 mm deep. Its height above the PCB surface is 12 mm.
The WAGO 231-334/001-000 has a specified temperature limit range of −60 to +100 °C. The operating limits of the complete electrical assembly depend on the PCB, mating connector and installation conditions.
No. WAGO MCS connectors are not designed for load-breaking operation. The circuit must be isolated before connecting or disconnecting the mating plug, and accessible header contacts must not remain live when unmated.
The header is designed for use with appropriately matched 4-pole WAGO MCS MIDI Classic female connectors having the correct 5.08 mm pitch and mating geometry. Compatibility should be confirmed using the manufacturer's connector documentation.
WAGO MCS MIDI Classic PCB headers are established connection components for electronic engineers, control panel manufacturers and industrial automation equipment builders. The WAGO 231-334/001-000 combines four reliable male contacts, straight through-hole solder termination and a compact 5.08 mm pitch to provide a practical, detachable electrical interface for industrial PCB assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.