Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.5015
The WAGO 231-333/001-000 is a 3-pole male PCB header designed to provide reliable pluggable electrical connections in industrial electronics, automation equipment and printed circuit board assemblies. Part of the established WAGO MCS MIDI Classic 231 series, this orange connector features straight through-hole solder pins and a 5.08 mm contact pitch, making it suitable for compact PCB-mounted electrical interfaces.
Designed for through-hole technology (THT), the WAGO 231-333/001-000 features three 1 × 1 mm square solder pins, each with a 5 mm solder-pin length. These pins are inserted into prepared PCB holes and soldered to establish permanent electrical connections between the connector header and the printed circuit board. Its vertical mounting orientation allows a compatible female connector to be plugged into the header from above the PCB.
With an IEC rated current of 12 A, voltage ratings of 320 V or 630 V depending on installation conditions, and tin-plated electrolytic copper contacts, this connector is suitable for industrial control electronics and modular equipment. Its orange polyamide 66 housing, integrated coding capability and detachable mating interface make it a practical choice for professional PCB connection systems.
The WAGO 231-333/001-000 provides a practical interface between a printed circuit board and detachable electrical wiring. Its three straight solder pins are designed for insertion through prepared PCB holes, where soldering creates permanent electrical connections to the board. This mounting method is well suited to industrial electronic assemblies requiring dependable electrical and mechanical integration.
The connector's 5.08 mm pitch allows it to mate with appropriately selected female connectors from the WAGO MCS MIDI Classic system. This arrangement separates the permanent PCB termination from the detachable field-wiring interface, making it easier to assemble, install and service modular industrial equipment.
Its tin-plated electrolytic copper contacts provide a reliable conductive interface, while the orange PA66 housing helps maintain contact separation and alignment. The shrouded header design provides a defined mating interface, and integrated coding fingers can support connector identification when configured with compatible mating components.
Unlike female cable connectors that use spring pressure conductor termination, the WAGO 231-333/001-000 is a solder-terminated male PCB header. It does not itself contain CAGE CLAMP® conductor terminals. The complete connection system may use a compatible female connector with CAGE CLAMP® technology to terminate external wiring.
The WAGO MCS MIDI Classic system is not designed for load breaking. Connectors must not be mated or disconnected while energised or under load. Circuit designs should also ensure that accessible male header contacts cannot remain live when the female connector is removed.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 3 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 | |
| Manufacturer part number | 231-333/001-000 | |
| Product type | THT male PCB header | |
| Connector gender | Male | |
| Number of potentials | 3 | |
| Number of connection types | 1 | |
| Number of levels | 1 | |
| Contact spacing | 5.08 mm | |
| PCB termination | Through-hole technology (THT) | |
| Termination method | Soldering | |
| Solder-pin orientation | Straight | |
| PCB mounting orientation | Vertical | |
| Solder-pin cross-section | 1 × 1 mm | |
| Solder-pin length | 5 mm | |
| Number of solder pins | 3 | |
| Solder pins per potential | 1 | |
| Solder-pin arrangement | In-line | |
| Recommended drilled-hole diameter | 1.4 mm (+0.1 mm tolerance) | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse withstand voltage | 4 kV | |
| Rated current (UL 1059, Use Groups B and D) | 10 A | |
| Rated voltage (UL 1059, Use Groups B and D) | 300 V | |
| Rated current (UL 1977) | 10 A | |
| Rated voltage (UL 1977) | 600 V | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Operating temperature range | −60 to +100 °C | |
| Width | 18.36 mm | |
| Height | 17 mm | |
| Height above PCB surface | 12 mm | |
| Depth | 8.4 mm | |
| Variable coding | Supported | |
| Connector locking | No integrated locking mechanism | |
| GTIN / EAN | 4044918865241 | |
| Product group | Multi Connection System (MCS) |
The WAGO 231-333/001-000 is a 3-pole male PCB header used to create detachable electrical connections between a printed circuit board and a compatible female connector. It is suitable for industrial control electronics, automation modules and PCB assemblies.
It is a male PCB header with three mating contacts. The header is soldered onto a PCB and connects to a compatible female pluggable connector.
The connector has 3 poles, providing three individual electrical potentials with a nominal 5.08 mm contact pitch.
The connector uses through-hole technology (THT). Its straight solder pins are inserted into prepared PCB holes and soldered to establish permanent electrical connections to the circuit board.
The connector features 1 × 1 mm square solder pins with a length of 5 mm. The specified drilled-hole diameter is 1.4 mm with a +0.1 mm tolerance.
The WAGO 231-333/001-000 has an IEC rated current of 12 A. Its IEC voltage ratings include 320 V under overvoltage category III conditions and 630 V under category II, pollution degree 2 conditions. The applicable rating depends on the installation conditions and complete mating assembly.
No. The WAGO 231-333/001-000 is a male PCB header with solder-pin termination. Compatible female connectors may use WAGO CAGE CLAMP® spring pressure technology for conductor termination, but the header itself is soldered to the PCB.
The connector features an orange polyamide 66 insulating housing and tin-plated electrolytic copper contacts. The insulating material has a UL94 V-0 flammability classification.
Yes. The WAGO 231-333/001-000 includes coding fingers that support suitable coding arrangements with compatible mating connectors, helping distinguish connection positions within an electrical assembly.
No. The connector is not designed for load breaking and must not be connected or disconnected while live or under load. The circuit design should also prevent accessible male contacts from remaining energised when the connector is unmated.
The WAGO 231-333/001-000 requires a compatible 3-pole female connector with matching 5.08 mm pitch, suitable electrical ratings and the appropriate mechanical and coding arrangement within the WAGO MCS MIDI Classic connection system.
WAGO MCS MIDI Classic connectors provide dependable pluggable electrical interfaces for industrial automation, machine control and PCB assembly. Combining straight THT solder pins, tin-plated copper contacts and a compact 3-pole design, the WAGO 231-333/001-000 offers a reliable male PCB header solution for professional industrial electronic applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.