Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.3315
The WAGO 231-332/001-000 is a 2-pole male PCB header with straight through-hole solder pins, designed for reliable pluggable electrical connections in industrial electronic equipment. Part of the established WAGO MCS MIDI Classic 231 series, this orange connector features a 5.08 mm contact pitch and provides a compact interface between a printed circuit board and a compatible female pluggable connector.
Designed for through-hole technology (THT) PCB mounting, the WAGO 231-332/001-000 uses straight 1 × 1 mm solder pins with a 5 mm pin length. Its tin-plated electrolytic copper contacts support dependable electrical conductivity, while the polyamide 66 insulating housing provides mechanical protection and electrical insulation for industrial applications.
With an IEC rated current of 12 A and voltage ratings of up to 630 V, depending on the applicable overvoltage category and pollution degree, this male header is suitable for control electronics, industrial automation modules and PCB-based electrical assemblies. Its straight solder-pin arrangement supports efficient PCB integration and detachable connections when paired with a compatible WAGO MCS MIDI Classic female connector.
The WAGO 231-332/001-000 provides a compact and dependable interface between printed circuit boards and detachable electrical wiring. Its straight through-hole solder pins are designed to pass through prepared PCB holes and be soldered into place, creating a permanent electrical connection between the header and the circuit board.
The connector's 5.08 mm pitch enables it to mate with appropriately selected female connectors from the WAGO MCS MIDI Classic system. This modular arrangement allows wiring to be terminated separately from the PCB assembly, helping simplify production, installation and maintenance of industrial electronic equipment.
The tin-plated electrolytic copper contacts provide a conductive mating interface, while the orange PA66 housing maintains contact separation and supports connector alignment. Variable coding capability allows suitable coding arrangements to be configured with compatible mating components, helping distinguish electrical connections in equipment containing multiple similar interfaces.
As part of the WAGO MCS connection system, the 231-332/001-000 is not designed for load breaking. The connector must not be mated or disconnected while energised or under load. PCB layouts and circuit designs should also ensure that accessible male contacts are not live when the female connector is removed.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 2 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 320 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 | |
| Model | 231-332/001-000 | |
| Product type | THT male PCB header | |
| Connector gender | Male | |
| Number of potentials | 2 | |
| Number of connection types | 1 | |
| Number of levels | 1 | |
| Contact spacing | 5.08 mm | |
| PCB termination | Through-hole technology (THT) | |
| Termination method | Soldering | |
| Solder-pin orientation | Straight | |
| PCB mounting orientation | Vertical header | |
| Mating direction relative to PCB | 90° | |
| Solder-pin cross-section | 1 × 1 mm | |
| Solder-pin length | 5 mm | |
| Number of solder pins per potential | 1 | |
| Solder-pin arrangement | In-line | |
| Recommended drilled-hole diameter | 1.4 mm (+0.1 mm tolerance) | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse withstand voltage | 4 kV | |
| Rated current (UL 1059, Use Groups B and D) | 10 A | |
| Rated voltage (UL 1059, Use Groups B and D) | 300 V | |
| Rated current (UL 1977) | 10 A | |
| Rated voltage (UL 1977) | 600 V | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Material temperature limits | −60 to +100 °C | |
| Width | 13.28 mm | |
| Height | 17 mm | |
| Height above PCB surface | 12 mm | |
| Depth | 8.4 mm | |
| Weight | Approximately 0.8 g | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Connector locking | Without locking mechanism | |
| Product group | Multi Connection System (MCS) | |
| GTIN / EAN | 4044918865173 |
The WAGO 231-332/001-000 is a 2-pole male PCB header used to create detachable electrical connections between a printed circuit board and a compatible female pluggable connector. It is suitable for industrial control electronics, automation modules and PCB assemblies.
It is a male connector header with two mating contacts. It is designed to be soldered onto a PCB and connected to an appropriately selected female connector.
The connector has 2 poles, providing two independent electrical potentials with a nominal 5.08 mm contact pitch.
The connector uses through-hole technology (THT). Its straight solder pins are inserted through prepared PCB holes and soldered to the circuit board.
The connector features 1 × 1 mm square solder pins with a length of 5 mm. WAGO specifies a drilled-hole diameter of 1.4 mm with a +0.1 mm tolerance.
The WAGO 231-332/001-000 has an IEC rated current of 12 A. Its IEC voltage ratings are 320 V under overvoltage category III conditions and 630 V under category II, pollution degree 2 conditions. The applicable rating depends on the complete connector assembly and installation conditions.
No. The WAGO 231-332/001-000 is a male PCB header with solder-pin termination. Compatible female connectors in the MCS MIDI Classic system may use CAGE CLAMP® technology for their conductor connections, but the header itself is soldered to the PCB.
The connector has an orange polyamide 66 insulating housing and tin-plated electrolytic copper contacts. The insulating material has a UL94 V-0 flammability classification.
Yes. The WAGO 231-332/001-000 supports variable coding when used with suitable mating connector components, helping distinguish different connection positions within an electrical assembly.
No. The connector is not designed for load breaking and must not be connected or disconnected while live or under load. Circuit design should also prevent accessible male contacts from remaining energised when the connector is unmated.
The WAGO 231-332/001-000 requires a compatible 2-pole female connector from the appropriate WAGO MCS MIDI Classic connection system, with matching 5.08 mm pitch, suitable electrical ratings and compatible mechanical and coding features.
WAGO MCS MIDI Classic connectors provide dependable electrical interfaces for industrial automation, PCB assembly and machine control equipment. The WAGO 231-332/001-000 combines straight THT solder pins, tin-plated copper contacts and a compact 2-pole configuration to deliver a practical male PCB header for professional industrial electronic applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.