Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£9.55
The WAGO 231-321/026-000 is a 21-pole, 1-conductor female pluggable connector from the WAGO 231 Series MCS MIDI Classic range. Featuring CAGE CLAMP® spring pressure connection technology, a 5.08 mm pin spacing and a 2.5 mm² nominal conductor cross-section, it provides a practical solution for detachable multi-pole electrical connections in industrial automation, control panels and machinery.
Designed for organised wiring and modular equipment integration, this connector accommodates 21 individual conductor connections within a single insulating housing. Its CAGE CLAMP® terminals secure conductors using spring pressure rather than conventional terminal-clamping screws, helping simplify assembly and maintain dependable electrical contact.
The orange housing provides clear visual identification within electrical assemblies, while the pluggable construction enables compatible mating components to be connected and separated during installation or maintenance. The WAGO 231-321/026-000 is particularly suitable for industrial equipment requiring a high number of connections within a compact, serviceable interface.
Technical selection note: The specifications above identify the exact connector configuration published by WAGO. Conductor cross-section limits, voltage and current ratings, stripping length, overall dimensions and environmental limits should be checked against the latest manufacturer datasheet and the intended mating arrangement before installation.
The WAGO 231-321/026-000 uses WAGO's established CAGE CLAMP® connection technology to provide dependable electrical contact with correctly installed conductors. Its spring pressure termination mechanism maintains clamping force without the routine retightening associated with conventional screw terminal connections.
The 21-pole pluggable format supports modular equipment design, allowing multiple conductors to be grouped into one connection assembly. This can simplify electrical installation, equipment integration and maintenance where compatible mating components are used.
For reliable operation, conductors must be prepared and terminated according to WAGO's installation instructions. The connector must be used within the applicable electrical ratings of the complete connection system and must not be connected or disconnected under load unless specifically approved for that operation.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 21.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 21 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-321/026-000 | |
| Series | 231 Series | |
| Connector family | MCS MIDI Classic | |
| Product type | 1-conductor female pluggable connector | |
| Connector gender | Female | |
| Number of conductor connection positions | 21 | |
| Conductors per pole | 1 | |
| Connection technology | CAGE CLAMP® | |
| Nominal conductor cross-section | 2.5 mm² | |
| Nominal pin spacing | 5.08 mm | |
| Conductor termination | Spring pressure connection | |
| Actuation method | Operating tool | |
| Connection arrangement | Pluggable | |
| Manufacturer designation | 231-321/026-000 |
The WAGO 231-321/026-000 is a 21-pole female pluggable connector from the WAGO 231 Series MCS MIDI Classic range, featuring CAGE CLAMP® spring pressure conductor termination for industrial electrical interconnections.
The connector has 21 poles, providing 21 individual conductor connection positions within one pluggable assembly.
The WAGO 231-321/026-000 uses CAGE CLAMP® spring pressure technology, which secures conductors without conventional terminal-clamping screws.
The connector has a 5.08 mm nominal pin spacing and belongs to the WAGO MCS MIDI Classic connector system.
Select a mating component from the appropriate WAGO MCS MIDI Classic connector system and verify its 21-pole arrangement, contact pitch, mechanical configuration and compatibility with the complete 231-321/026-000 manufacturer part number.
WAGO MCS MIDI Classic connectors provide modular spring pressure electrical interconnections for machine builders, control panel manufacturers and industrial automation engineers. The 231-321/026-000 combines a 21-pole connection format with established CAGE CLAMP® technology for organised, detachable industrial wiring assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.