Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£5.14
The WAGO 231-310/107-000 is a 10-pole female pluggable connector with screw flanges from the WAGO 231 Series MCS MIDI Classic connection system. Engineered for industrial automation, electrical control panels and modular electronic equipment, this connector combines dependable spring pressure conductor termination with a secure mechanical fastening arrangement. Its ten connection points provide a practical solution for removable power, control and signal wiring assemblies.
Featuring WAGO CAGE CLAMP® connection technology, a 5.08 mm contact pitch and a 16 A IEC rated current, the WAGO 231-310/107-000 supports reliable electrical connections without conventional terminal screws. Its nominal conductor capacity of 2.5 mm² accommodates commonly used solid and fine-stranded copper conductors, while vertical and horizontal spring-clamp actuation provides convenient access during installation.
The distinctive screw-flange design allows the connector to be mechanically secured to a compatible male header using the appropriate fastening arrangement. This makes the WAGO 231-310/107-000 10-way female connector particularly useful in industrial equipment where secure connector retention, organised wiring and straightforward servicing are important. Integrated test ports, coding fingers and an orange insulating housing further support practical equipment integration.
The WAGO 231-310/107-000 combines the convenience of a pluggable electrical interface with the reliability of WAGO's CAGE CLAMP® spring pressure termination system. Instead of relying on conventional terminal screws, the connection system uses a spring element to maintain conductor contact pressure. This supports consistent electrical connections and reduces the maintenance associated with screw-terminal retightening.
The connector's screw flanges provide a mechanical fastening arrangement for use with a compatible male header. Once properly secured using the specified fastening hardware, the connector can resist unintended separation caused by handling or equipment vibration. This makes the screw-flange configuration especially useful for industrial machinery, control assemblies and modular equipment requiring dependable plug retention.
The standard MCS MIDI Classic design also supports vertical and horizontal CAGE CLAMP® actuation, allowing cable assemblies to be wired before installation or terminated directly on equipment. Integrated test ports provide convenient access for electrical measurements, while coding fingers support controlled mating arrangements. The connector is not intended for connection or disconnection under load.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 21.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 10 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-310/107-000 | |
| Series | 231 Series / MCS MIDI Classic | |
| Product group | Multi Connection System | |
| Product type | Female pluggable connector / terminal block plug | |
| Connector gender | Female | |
| Number of connection points | 10 | |
| Number of electrical potentials | 10 | |
| Number of levels | 1 | |
| Conductors per pole | 1 | |
| Contact pitch | 5.08 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC III/3) | 320 V | |
| Rated voltage (IEC III/2) | 320 V | |
| Rated voltage (IEC II/2) | 630 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Rated current (UL 1977) | 15 A | |
| Rated voltage (UL 1977) | 600 V | |
| Nominal conductor cross-section | 2.5 mm² | |
| Solid conductor range | 0.08–2.5 mm² | |
| Fine-stranded conductor range | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor strip length | 8–9 mm | |
| Connection technology | CAGE CLAMP® | |
| Termination method | Screwless spring pressure connection | |
| Actuation method | Suitable operating tool | |
| Actuation arrangement | Vertical and horizontal access | |
| Connector connection type | For conductors | |
| Mounting arrangement | Pluggable connection to a compatible male header | |
| Plug-in locking mechanism | Screw flange | |
| Variable coding | Yes | |
| Integrated test ports | Yes | |
| Anti-rotation protection | Yes | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Temperature limits | −60 to +85 °C | |
| Overall width | Approximately 60.8 mm, based on the manufacturer's dimension formula | |
| Body length reference | Approximately 56.2 mm, based on the manufacturer's dimension formula | |
| Connector height | 14.3 mm | |
| Connector depth | 26.45 mm | |
| Approximate net weight | 19.25 g | |
| Country of origin | Germany | |
| EAN / GTIN | 4044918840729 |
The WAGO 231-310/107-000 is a ten-pole female pluggable connector used to connect copper conductors to compatible male headers in industrial automation, control panels and modular electronic equipment. Its screw flanges provide secure mechanical retention.
The connector has 10 poles, providing ten independent electrical connection points with a 5.08 mm contact pitch.
The connector has an IEC rated current of 16 A and a UL 1977 rated current of 15 A. The permissible current in a complete installation depends on the mating connector, conductor size, applicable approvals and operating conditions.
The connector has IEC rated voltages of 320 V under category III/3 and III/2 and 630 V under category II/2. Its UL 1977 voltage rating is 600 V. The applicable rating depends on the installation environment and complete connector assembly.
The WAGO 231-310/107-000 supports solid and fine-stranded copper conductors from 0.08 to 2.5 mm², corresponding to 28–12 AWG. Ferrule-equipped conductors must comply with the specified termination limits.
The connector uses WAGO CAGE CLAMP® spring pressure technology, providing reliable screwless conductor termination with a suitable operating tool.
The screw flanges provide mechanical retention when the connector is mated with a compatible male header and secured using appropriate fastening hardware. This helps prevent unintended connector separation during equipment operation or servicing.
Yes. The connector includes integrated test ports for electrical measurements and coding fingers for configurable mating arrangements. It also features anti-rotation protection.
The manufacturer's dimensional formula gives an overall width of approximately 60.8 mm. The connector has a height of 14.3 mm and a depth of 26.45 mm. Its approximate weight is 19.25 g. Allow additional installation clearance for wiring and fastening access.
No. The WAGO MCS MIDI Classic connector system is not intended for load-breaking operations. Electrical power must be isolated before connecting or disconnecting the plug, and accessible mating contacts must not remain live when unmated.
WAGO MCS MIDI Classic connectors provide modular electrical interconnection solutions for industrial automation, control panel construction and electronic equipment manufacturing. The WAGO 231-310/107-000 combines ten-pole connectivity, CAGE CLAMP® spring pressure termination and screw-flange fastening to support organised wiring, dependable electrical connections and convenient maintenance in industrial equipment.
Manufacturer product reference: WAGO 231-310/107-000 official product information.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.