Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£4.90
The WAGO 231-310/026-000/058-000 is a 10-pole female pluggable connector variant from the WAGO MCS MIDI Classic 231 series, designed for industrial automation, electrical control panels, machinery and modular equipment wiring. Based on the established WAGO 231-310/026-000 connector platform, it offers a compact multi-pole connection solution incorporating WAGO's proven CAGE CLAMP® spring-pressure connection technology.
The standard 231-310/026-000 connector features a 5.08 mm pin spacing, a nominal conductor cross-section of 2.5 mm² and ten independent electrical connection positions. Its spring-pressure termination system provides dependable conductor retention without conventional screw-terminal tightening, helping simplify cable preparation, electrical installation and equipment maintenance.
The complete part number 231-310/026-000/058-000 identifies a specific manufacturer ordering variant. The standard base connector features an orange insulating housing, a single-row connection arrangement and a pluggable design suitable for compatible WAGO MCS MIDI Classic mating components. The precise modification represented by the /058-000 suffix has not been independently verified, so variant-specific electrical, mechanical and dimensional characteristics should be confirmed against WAGO documentation for the complete part number.
The WAGO MCS MIDI Classic series provides practical pluggable electrical connections for industrial automation, electrical control cabinets and electronic equipment. Its CAGE CLAMP® spring-pressure technology uses a mechanical spring to secure the conductor against the electrical contact, maintaining contact pressure without conventional screw-terminal tightening. This connection method supports efficient installation and is particularly useful in equipment requiring organised multi-pole wiring.
The WAGO 231-310/026-000/058-000 belongs to the ten-pole female connector family based on the standard 231-310/026-000 platform. Its pluggable construction supports detachable wiring interfaces for machinery, modular electrical equipment and industrial control systems. The additional /058-000 suffix distinguishes this ordering variant from the standard connector, making it important to verify the exact mating component, mechanical features and electrical specifications before installation or replacement.
| Manufacturer | WAGO |
|---|---|
| Series | MCS MIDI Classic 231 |
| Full model number | 231-310/026-000/058-000 |
| Base connector model | 231-310/026-000 |
| Product category | Pluggable connectors |
| Product type | Female pluggable connector variant |
| Connector gender | Female |
| Number of poles | 10 |
| Conductors per pole | 1 |
| Total connection positions | 10 |
| Connection arrangement | Single-row |
| Connection technology | CAGE CLAMP® |
| Actuation method | Operating tool |
| Pin spacing | 5.08 mm |
| Nominal conductor cross-section | 2.5 mm² |
| Base-family rated current (IEC) | 16 A |
| Base-family rated voltage (IEC, III/3) | 320 V |
| Base-family rated impulse voltage | 4 kV |
| Base-family rated voltage (IEC, II/2) | 630 V |
| Base-family solid conductor range | 0.08–2.5 mm² |
| Base-family fine-stranded conductor range | 0.08–2.5 mm² |
| Base-family conductor size | 28–12 AWG |
| Base-family stripping length | 8–9 mm |
| Base connector locking mechanism | None |
| Base connector housing colour | Orange |
| Base connector packaging unit | 50 pieces |
| Additional ordering suffix | /058-000 |
| Variant-specific mechanical configuration | Requires manufacturer confirmation |
| Variant-specific dimensions | Requires manufacturer confirmation |
| Variant-specific electrical ratings | Requires manufacturer confirmation |
| Mating compatibility | Must be verified using the complete part number |
| Connector system | WAGO Multi Connection System (MCS) |
The WAGO 231-310/026-000/058-000 is a ten-pole female pluggable connector variant intended for detachable electrical connections in industrial automation systems, control panels, machinery and electronic equipment.
The connector belongs to a 10-pole configuration, providing ten separate conductor connection positions in a single-row arrangement.
The standard WAGO 231-310/026-000 connector has a 5.08 mm pin spacing. Mating components must be selected for the correct pitch, pole count and mechanical configuration.
The standard WAGO 231-310/026-000 connector has a 2.5 mm² nominal conductor cross-section. The permitted conductor sizes for the complete /058-000 variant should be checked against manufacturer documentation.
The standard WAGO MCS MIDI Classic 231-310 connector family has a typical 16 A IEC rated current. The applicable rating for the complete /058-000 variant must be confirmed against its manufacturer specifications and the selected mating component.
CAGE CLAMP® spring-pressure technology uses a mechanical spring to secure the conductor against the electrical contact. A suitable operating tool opens the clamping mechanism so that a correctly prepared conductor can be inserted or removed.
The /058-000 suffix identifies a specific WAGO manufacturer ordering variant of the 231-310/026-000 connector. The precise modification associated with this suffix has not been independently verified and should be confirmed with WAGO using the complete part number.
The standard 231-310/026-000 base connector is specified without additional plug-in locking. Whether the /058-000 variant changes the mechanical configuration should be confirmed against its manufacturer documentation.
Yes. The WAGO MCS MIDI Classic connector family is designed for pluggable electrical connections in industrial control panels, automation systems and equipment wiring, provided that the connector ratings and mating compatibility meet the installation requirements.
Select a compatible WAGO MCS MIDI Classic mating component with the correct 10-pole arrangement, 5.08 mm pitch and mechanical configuration. Always verify compatibility against the full part number, including the /058-000 suffix.
WAGO MCS connectors without breaking capacity under IEC 61984 must not be connected or disconnected while live or under load. The electrical circuit should be safely isolated before mating or unmating the connector.
WAGO MCS MIDI Classic connectors are designed for electrical engineers, industrial automation specialists, control panel builders and OEM equipment manufacturers requiring dependable pluggable electrical connections. The WAGO 231-310/026-000/058-000 belongs to the established ten-pole connector family, combining CAGE CLAMP® spring-pressure technology with a compact 5.08 mm connection format to support efficient electrical installation, modular equipment assembly and straightforward maintenance.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.