Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£4.45
The WAGO 231-307/037-000/034-000 is a 7-pole pluggable female terminal block connector from the established WAGO MCS MIDI Classic 231 series. Designed for industrial automation, control panel wiring and electronic equipment, this connector provides a practical solution for connecting multiple electrical conductors to compatible male headers.
Based on the WAGO 231-307/037-000 connector design, this product belongs to a range featuring CAGE CLAMP® spring pressure connection technology and lateral locking levers. The spring connection system provides secure conductor termination without conventional screw terminals, while the locking arrangement helps retain the pluggable connection in industrial equipment.
The connector family features a 5.08 mm contact pitch, seven independent electrical connection positions and support for conductors up to 2.5 mm². The standard 231-307/037-000 configuration has an IEC rated current of 16 A and an orange insulating housing. The additional /034-000 suffix identifies a specific product variant; its individual construction details and electrical approvals should be checked against the complete manufacturer part number.
Technical note: The full part number 231-307/037-000/034-000 is listed as a WAGO female plug variant. The technical figures above are drawn from the standard 231-307/037-000 connector specification. The exact purpose of the /034-000 suffix, any variant-specific changes to materials or construction, and the individual approvals of the complete part number have not been independently confirmed. Final electrical ratings, dimensions and mating compatibility should be verified against the relevant WAGO documentation before installation.
The WAGO MCS MIDI Classic 231 connector system uses CAGE CLAMP® spring pressure technology to establish dependable electrical contact between conductors and connector terminals. The spring mechanism holds the conductor against the electrical contact surface without relying on the tightening torque of a conventional screw terminal. This supports consistent connection pressure during normal industrial vibration and temperature changes.
The standard 231-307/037-000 connector incorporates lateral locking levers that mechanically retain the female connector when it is connected to an appropriately matched male header. This helps reduce the risk of accidental separation in industrial machinery, control cabinets and electronic equipment. The locking levers secure the pluggable interface, while the CAGE CLAMP® system secures the individual conductors.
The seven-pole arrangement provides seven separate electrical connections within a compact housing. This makes the connector family useful for industrial control circuits, electronic equipment interfaces and modular wiring assemblies. Integrated test ports and coding fingers in the standard design assist with electrical measurements and connector identification.
The pluggable construction allows cable assemblies to be prepared separately from the equipment, helping simplify production and servicing. The connector should only be mated with compatible components, and the electrical circuit must be safely isolated before the connection is separated.
| Manufacturer | WAGO |
|---|---|
| Series | MCS MIDI Classic 231 |
| Manufacturer part number | 231-307/037-000/034-000 |
| Base connector part number | 231-307/037-000 |
| Product type | Pluggable female terminal block connector |
| Connector gender | Female |
| Number of poles | 7 |
| Number of connection points | 7 |
| Number of potentials | 7 |
| Number of connection levels | 1 |
| Conductors per pole | 1 |
| Connection technology | CAGE CLAMP® spring pressure connection (standard configuration) |
| Actuation type | Operating tool (standard configuration) |
| Contact pitch | 5.08 mm |
| Connector locking | Lateral locking levers (standard /037-000 configuration) |
| Rated current (IEC) | 16 A (standard configuration) |
| Rated voltage (IEC, III/3) | 320 V (standard configuration) |
| Rated voltage (IEC, III/2) | 320 V (standard configuration) |
| Rated voltage (IEC, II/2) | 630 V (standard configuration) |
| Rated impulse voltage (IEC) | 4 kV (standard configuration) |
| Rated current (UL) | 15 A (standard configuration) |
| Rated voltage (UL) | 600 V (standard configuration) |
| Solid conductor cross-section | 0.08–2.5 mm² (standard configuration) |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² (standard configuration) |
| Conductor size | 28–12 AWG (standard configuration) |
| Wire stripping length | 8–9 mm (standard configuration) |
| Conductor entry | In-line with mating direction (standard configuration) |
| Contact type | Female socket |
| Contact material | Copper alloy (standard configuration) |
| Contact plating | Tin (standard configuration) |
| Housing material | Polyamide 66 (PA66), standard configuration |
| Housing colour | Orange (standard configuration) |
| Flammability classification | UL94 V-0 (standard configuration) |
| Temperature limit range | −60 to +85 °C (standard configuration) |
| Mounting configuration | Free-hanging / in-line (standard configuration) |
| Width | 52.16 mm (standard configuration) |
| Height | 14.3 mm (standard configuration) |
| Variant suffix | /034-000 |
The WAGO 231-307/037-000/034-000 is a 7-pole pluggable female connector variant intended for multi-conductor electrical connections in industrial automation, control panels, machinery and electronic equipment. It belongs to the WAGO MCS MIDI Classic 231 connector family.
The standard 231-307/037-000 connector features lateral locking levers for mechanical retention with compatible male headers. The precise mechanical configuration of the additional /034-000 variant should be confirmed from its manufacturer documentation.
The standard WAGO 231-307/037-000 connector supports solid and fine-stranded conductors from 0.08–2.5 mm² (28–12 AWG). The applicable conductor range for the complete /034-000 variant should be checked before installation.
The standard WAGO 231-307/037-000 configuration has an IEC rated current of 16 A and a rated voltage of 320 V under overvoltage category III and pollution degree 3. The exact ratings for the complete /034-000 variant and its mating arrangement require confirmation.
No. WAGO MCS MIDI Classic connectors without breaking capacity are not intended to be connected or disconnected while energised or under load. The electrical circuit must be safely isolated before releasing the connector and separating the mating components.
WAGO MCS MIDI Classic connectors provide practical, space-efficient electrical interconnections for industrial machinery, automation systems and electronic control equipment. Their established CAGE CLAMP® spring connection technology and modular pluggable design make them a dependable choice for electrical engineers, panel builders and OEM equipment manufacturers.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.