Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.42
The WAGO 231-307/008-000 is a robust 7-pole pluggable female connector with snap-in mounting feet, designed for secure electrical connections in industrial automation, control panels and electronic equipment. Part of the WAGO MCS MIDI Classic 231 Series, this connector combines proven CAGE CLAMP® spring-pressure connection technology with an integrated snap-in mounting arrangement for dependable mechanical installation.
Featuring a 5.08 mm contact pitch, seven independent electrical connection positions and an orange insulating housing, the WAGO 231-307/008-000 provides a compact interface between external conductors and compatible male headers. Its CAGE CLAMP® connection system accommodates solid and fine-stranded conductors from 0.08 to 2.5 mm², while operating-tool actuation supports efficient cable pre-assembly and wiring directly at the equipment.
With an IEC rated current of 16 A, an IEC voltage rating of up to 630 V under specified insulation conditions and a temperature range of −60 to +85 °C, this connector is suitable for demanding industrial applications. Its snap-in mounting feet, integrated test ports, coding fingers and durable insulating construction make it particularly useful for modular equipment requiring secure, serviceable electrical interfaces.
The WAGO 231-307/008-000 provides a dependable electrical interface between external conductors and compatible industrial electronic equipment. Its seven-pole configuration accommodates multiple independent circuits within a compact connector assembly, while the integrated snap-in mounting feet help secure the connector in suitable mounting arrangements. The detachable design also enables cable assemblies to be prepared, tested and installed separately from the mating header, improving production efficiency and serviceability.
WAGO's CAGE CLAMP® spring-pressure technology maintains reliable conductor contact without conventional terminal screw tightening. Integrated test ports and coding provisions support electrical inspection and organised installation. The connector is not designed for switching or load-breaking operations and must not be connected or disconnected while live or under load. Correct mating header selection, mechanical mounting compatibility and compliance with the applicable electrical ratings are essential for safe operation.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 21.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 7 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Model | 231-307/008-000 | |
| Product type | Pluggable female connector with snap-in mounting feet | |
| Connector gender | Female / socket | |
| Number of connection points | 7 | |
| Number of potentials | 7 | |
| Number of levels | 1 | |
| Conductors per pole | 1 | |
| Pin spacing | 5.08 mm | |
| Connection technology | CAGE CLAMP® | |
| Termination type | Screwless spring-pressure connection | |
| Actuation method | Operating tool | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, category II/2) | 630 V | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor strip length | 8–9 mm | |
| Conductor entry direction | Parallel to mating direction (180° plug wire entry classification) | |
| Connector arrangement | Single-row, single-level | |
| Mounting type | Snap-in mounting arrangement | |
| Connector retention | Retention latches on non-wire side | |
| Variable coding | Supported by connector family | |
| Integrated test ports | Yes | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel (CrNi) | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Operating temperature range | −60 to +85 °C | |
| Insulation height | 14.3 mm | |
| Depth | 26.45 mm | |
| Approximate overall width | 37.1 mm, including the snap-in mounting arrangement; confirm against the installation drawing | |
| Country of origin | Germany | |
| Applicable connector standards | IEC 61984 and EN 61984; UL 1059 and UL 1977 classifications |
The WAGO 231-307/008-000 is a 7-pole pluggable female connector used to connect electrical conductors to compatible male headers in industrial automation, control equipment and electronic assemblies. Its snap-in mounting feet support secure installation in suitable mounting arrangements.
The connector has 7 poles, providing seven independent electrical connection positions with a 5.08 mm contact pitch and one conductor connection per pole.
The WAGO 231-307/008-000 accepts solid and fine-stranded conductors from 0.08 to 2.5 mm², equivalent to 28–12 AWG. Fine-stranded conductors with insulated ferrules are supported from 0.25 to 1.5 mm², and the recommended conductor strip length is 8–9 mm.
The connector has an IEC rated current of 16 A and a rated voltage of up to 630 V under the applicable IEC insulation conditions. The published UL classifications include 15 A and 600 V; the relevant rating must be selected according to the installation conditions and certification requirements.
The snap-in mounting feet allow the WAGO 231-307/008-000 to be mechanically secured in compatible mounting arrangements. They support stable connector positioning and convenient installation without requiring a separate screw-flange locking mechanism. The connector must not be mated or unmated while live or under load.
WAGO MCS MIDI Classic connectors provide dependable pluggable electrical connections for industrial automation, electronic assemblies and control equipment. The WAGO 231-307/008-000 combines a seven-pole configuration, CAGE CLAMP® spring-pressure termination, integrated test ports and snap-in mounting feet to support efficient wiring, secure installation and maintainable industrial electrical interfaces.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.