Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.38
The WAGO 231-306/107-000 is a robust 6-pole pluggable female terminal block connector with screw flange locking, designed for dependable electrical connections in industrial automation, control panels and electronic equipment. Part of the established WAGO MCS MIDI Classic 231 series, this connector combines secure spring pressure conductor termination with a mechanically retained pluggable interface.
Featuring WAGO's proven CAGE CLAMP® spring pressure connection technology, the connector provides reliable, screwless termination for solid and fine-stranded conductors. Its screw flange locking arrangement enables secure attachment to a suitably matched mating connector, helping prevent accidental disconnection in industrial equipment where mechanical stability is important.
With a 5.08 mm contact pitch, 16 A IEC rated current and conductor capacity of 0.08–2.5 mm², the WAGO 231-306/107-000 is suitable for multi-conductor control circuits, PCB-to-wire connections and modular electrical assemblies. Its orange insulating housing, integrated test ports and coding fingers provide practical advantages during installation, commissioning and maintenance.
Electrical rating note: IEC voltage ratings depend on the relevant overvoltage category and pollution degree. The permissible operating current depends on conductor size, ambient temperature and the complete mating arrangement. The WAGO 231-306/107-000 is a connector without breaking capacity and must not be connected or disconnected while energised or under load.
The WAGO 231-306/107-000 combines CAGE CLAMP® spring pressure conductor termination with a screw flange locking mechanism. The CAGE CLAMP® system secures conductors against the electrical contact surface using spring pressure rather than conventional screw tightening. This helps maintain consistent contact pressure during normal industrial vibration and temperature fluctuations.
The screw flange provides additional mechanical retention between the female connector and a compatible male header. This makes the connector particularly useful in machinery, control cabinets and electronic assemblies where accidental separation could interrupt equipment operation. Unlike the spring clamp used for conductor termination, the screw flange is a mechanical locking feature for the pluggable connection.
The connector supports vertical and horizontal CAGE CLAMP® actuation, enabling conductors to be installed or removed using a suitable operating tool. Integrated test ports provide convenient access for electrical measurements, while coding fingers support configurable mating arrangements when used with appropriate compatible components.
Its six independent electrical connection positions make the WAGO 231-306/107-000 suitable for multi-conductor control wiring, equipment power interfaces and modular PCB connections. The pluggable design allows cable assemblies to be prepared separately from equipment, simplifying production, installation and maintenance.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 21.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 6 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 | |
| Manufacturer part number | 231-306/107-000 | |
| Product type | Pluggable female terminal block connector | |
| Connector gender | Female | |
| Total connection points | 6 | |
| Total potentials | 6 | |
| Number of connection levels | 1 | |
| Conductors per pole | 1 | |
| Connection technology | CAGE CLAMP® | |
| Actuation type | Operating tool | |
| Contact pitch | 5.08 mm | |
| Rated current (IEC) | 16 A | |
| Rated current (UL) | 15 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated voltage (UL) | 600 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Wire stripping length | 8–9 mm | |
| Conductor entry | In-line with mating direction | |
| Connector locking | Screw flange | |
| Mounting configuration | Free-hanging / in-line cable connection | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Flammability classification | UL94 V-0 | |
| Temperature limit range | −60 to +85 °C | |
| Width | 40.38 mm | |
| Height | 14.3 mm | |
| Depth | 26.45 mm | |
| Weight | Approximately 12.06 g | |
| GTIN / EAN | 4044918370585 | |
| Country of origin | Germany |
The WAGO 231-306/107-000 is a 6-pole pluggable female connector used to connect electrical conductors to compatible male headers in industrial automation, control panels, machinery and PCB-based electronic equipment. Its screw flange provides additional mechanical retention.
The screw flange locking mechanism helps secure the female connector to a compatible mating header, reducing the risk of accidental disconnection. It is a mechanical retention feature and is separate from the CAGE CLAMP® spring connection used to terminate conductors.
The connector supports solid and fine-stranded conductors from 0.08–2.5 mm² (28–12 AWG). Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while conductors with uninsulated ferrules are supported from 0.25–2.5 mm².
The connector has an IEC rated current of 16 A and a rated voltage of 320 V under overvoltage category III and pollution degree 3. A rated voltage of 630 V applies under overvoltage category II and pollution degree 2.
No. The WAGO 231-306/107-000 is a connector without breaking capacity and must not be connected or disconnected while energised or under load. Electrical circuits should be safely isolated before separating the connector, even when the screw flange has been released.
WAGO MCS MIDI Classic connectors provide dependable, space-efficient electrical interconnections for industrial machinery, automation systems and electronic equipment. The 231-306/107-000 combines proven CAGE CLAMP® spring connection technology with secure screw flange locking and a practical six-pole design, making it a reliable choice for electrical engineers, panel builders and OEM equipment manufacturers.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.