Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.98
The WAGO 231-306/102-000 is a high-quality 6-pole pluggable female terminal block connector with an integrated end plate, designed for reliable electrical connections in industrial automation, control panels and electronic equipment. As part of the established WAGO 231 MCS MIDI Classic connector series, it provides a compact and dependable solution for connecting electrical conductors to compatible printed circuit board (PCB) headers and industrial electrical assemblies.
Featuring WAGO's proven CAGE CLAMP® spring pressure connection technology, the connector provides secure, screwless conductor termination while accommodating solid and fine-stranded conductors. Its integrated end plate creates a complete connector housing, while built-in test ports, coding fingers and retention features simplify electrical installation, testing and maintenance.
With a 5.08 mm contact pitch, 6-pole configuration, 16 A IEC rated current and conductor capacity of 0.08–2.5 mm², the WAGO 231-306/102-000 is suitable for industrial control wiring, PCB interconnections and modular electrical systems. Its distinctive orange housing and compact free-hanging design make it a practical choice for machine builders, panel manufacturers and industrial automation engineers.
Electrical rating note: IEC voltage ratings depend on the applicable overvoltage category and pollution degree. The permissible operating current also depends on conductor size, ambient temperature and the complete mated connector arrangement. The connector is designed for electrical connections without breaking capacity and must not be connected or disconnected while energised or under load.
The WAGO 231-306/102-000 combines CAGE CLAMP® spring pressure conductor termination with a compact integrated end plate design. The spring pressure mechanism secures electrical conductors without conventional screw terminals, helping maintain consistent contact pressure during normal industrial vibration and temperature changes. This reduces dependence on manually maintained screw tightening torque and supports dependable long-term electrical connections.
The integrated end plate provides a complete connector housing, helping simplify assembly and installation. The connector also supports vertical and horizontal CAGE CLAMP® actuation, allowing conductors to be installed or removed using an appropriate operating tool. Its integrated test ports provide convenient access for electrical measurements, while coding fingers help differentiate connector arrangements when compatible coding components are used.
The 6-pole configuration provides six independent electrical connection positions within a compact 30.48 mm wide housing. This makes the WAGO 231-306/102-000 suitable for multi-conductor control circuits, industrial power interfaces and electronic equipment connections. Its free-hanging pluggable construction enables wiring assemblies to be prepared separately from equipment, helping simplify production, commissioning and maintenance.
As part of the WAGO MCS MIDI Classic system, this connector can be combined with appropriately matched male headers to create modular electrical interconnections. The retention latches provide additional mechanical security, while the orange housing supports easy identification within industrial wiring assemblies.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 21.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 6 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | 231 MCS MIDI Classic | |
| Model | 231-306/102-000 | |
| Product type | Pluggable female terminal block connector | |
| Connector gender | Female | |
| Number of connection points | 6 | |
| Number of potentials | 6 | |
| Conductors per pole | 1 | |
| Number of levels | 1 | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Pin spacing | 5.08 mm | |
| Rated current (IEC) | 16 A | |
| Rated current (UL) | 15 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated voltage (UL) | 600 V | |
| Rated impulse voltage (IEC, II/2) | 4 kV | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size (AWG) | 28–12 AWG | |
| Wire stripping length | 8–9 mm | |
| Conductor entry | 180° in-line configuration | |
| Actuation | Operating tool | |
| Actuation direction | Parallel or perpendicular to conductor entry | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Flammability rating | UL94 V-0 | |
| Operating temperature range | −60 to +85 °C | |
| Mounting type | Free-hanging / in-line cable mounting | |
| Housing design | Integrated end plate | |
| Retention mechanism | Retention latches | |
| Dimensions (H × W × D) | 14.3 × 30.48 × 26.45 mm | |
| Weight | Approx. 10.6 g | |
| GTIN / EAN | 4044918372725 | |
| Country of origin | Germany |
The WAGO 231-306/102-000 is a 6-pole pluggable female terminal block connector used to connect electrical conductors to compatible male headers in industrial automation, electrical control panels, machinery and PCB-based electronic equipment.
The integrated end plate forms part of the connector housing, providing a complete connector assembly without requiring a separate end plate. This simplifies installation and helps maintain a compact electrical connection arrangement.
The connector supports solid and fine-stranded conductors from 0.08–2.5 mm² (28–12 AWG). Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while conductors with uninsulated ferrules are supported from 0.25–2.5 mm².
The connector has an IEC rated current of 16 A and a rated voltage of 320 V under overvoltage category III and pollution degree 3. A rated voltage of 630 V applies under IEC overvoltage category II and pollution degree 2.
No. The WAGO 231-306/102-000 is a connector without breaking capacity under the applicable connector standards. It must not be connected or disconnected while energised or under load. Electrical circuits should be safely isolated before separating the connector, and the installation must prevent hazardous contact with accessible live parts.
WAGO MCS MIDI Classic connectors are engineered to provide dependable, space-efficient electrical interconnections for industrial machinery, automation systems and electronic equipment. The 231-306/102-000 combines proven CAGE CLAMP® spring connection technology with an integrated end plate, secure retention features and a compact six-pole design, making it a practical choice for electrical engineers, panel builders and OEM equipment manufacturers.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.