Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.47
The WAGO 231-305/026-000 is a high-quality 5-pole pluggable female connector from the WAGO MCS MIDI Classic 231 Series, designed to provide secure, detachable electrical connections in industrial automation, control equipment and electronic assemblies. Featuring WAGO's proven CAGE CLAMP® spring-pressure connection technology, this connector enables reliable conductor termination without conventional terminal screws.
With a 5.08 mm contact pitch, five independent connection points and support for conductors up to 2.5 mm², the WAGO 231-305/026-000 offers a compact solution for connecting external wiring to compatible male headers. Its orange polyamide housing incorporates coding fingers, integrated test ports and retention latches, while vertical and horizontal CAGE CLAMP® actuation supports efficient cable pre-assembly and wiring directly at the equipment.
Rated at 16 A under IEC specifications, with rated voltages of 320 V or 630 V depending on the applicable insulation conditions, the connector is suitable for a wide range of industrial electrical interfaces. Its screwless termination, detachable construction and durable contact materials make it an excellent choice for OEM equipment, control panels and modular industrial electronics.
The WAGO 231-305/026-000 provides a dependable connection interface between external conductors and compatible industrial electronic equipment. Its five-pole configuration accommodates multiple independent circuits within a compact connector assembly, while its detachable design allows wiring to be prepared and inspected separately from the mating header. This helps streamline production, installation and maintenance of industrial control systems.
WAGO's CAGE CLAMP® spring-pressure technology maintains consistent contact force across supported conductor types, reducing reliance on conventional screw-tightened terminals. Integrated test ports simplify electrical measurements, while coding fingers and anti-rotation protection support organised connector installation. The connector is designed without breaking capacity under IEC 61984 and must not be connected or disconnected while live or under load. Correct mating connector selection and compliance with the applicable electrical ratings remain essential.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 21.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 5 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 Series | |
| Model | 231-305/026-000 | |
| Product type | Pluggable female connector | |
| Connector gender | Female / socket | |
| Number of connection points | 5 | |
| Number of potentials | 5 | |
| Number of levels | 1 | |
| Number of connection types | 1 | |
| Conductors per pole | 1 | |
| Pin spacing | 5.08 mm | |
| Connection technology | CAGE CLAMP® | |
| Actuation method | Operating tool | |
| Actuation directions | Parallel and perpendicular to conductor entry | |
| Rated current (IEC) | 16 A | |
| Rated voltage (III/3) | 320 V | |
| Rated voltage (III/2) | 320 V | |
| Rated voltage (II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1977) | 15 A | |
| Rated voltage (UL 1977) | 600 V | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor strip length | 8–9 mm | |
| Conductor entry direction | Parallel to mating direction (0°) | |
| Connector arrangement | Single-row, single-level | |
| Mounting type | Free-hanging / in-line pluggable connection | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Integrated test ports | Yes | |
| Mismating protection | No | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel (CrNi) | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Temperature limit range | −60 to +85 °C | |
| Width | 26.9 mm | |
| Height | 14.3 mm | |
| Depth | 26.45 mm | |
| Weight | Approx. 9.3 g | |
| Country of origin | Germany |
The WAGO 231-305/026-000 is a 5-pole pluggable female connector used to connect electrical conductors to compatible mating headers in industrial automation, electronic control equipment and modular wiring systems. Its CAGE CLAMP® termination provides secure, screwless conductor connections.
The connector has 5 poles, providing five separate electrical connection points with a 5.08 mm contact pitch and one conductor connection per pole.
The WAGO 231-305/026-000 accepts solid and fine-stranded conductors from 0.08 to 2.5 mm², equivalent to 28–12 AWG. Fine-stranded conductors with insulated ferrules are supported from 0.25 to 1.5 mm², and the recommended strip length is 8–9 mm.
The connector has an IEC rated current of 16 A and rated voltages of 320 V or 630 V, depending on the applicable overvoltage category and pollution degree. Its rated impulse withstand voltage is 4 kV.
No. The WAGO 231-305/026-000 is a pluggable connector without breaking capacity under IEC 61984. It must not be connected or disconnected while live or under load, and accessible mating header pins must not remain energised when unmated.
WAGO MCS MIDI Classic connectors are widely used in industrial control systems, electronic assemblies and automation equipment where dependable detachable electrical connections are essential. The WAGO 231-305/026-000 combines a 5-pole configuration, CAGE CLAMP® spring-pressure termination, integrated test ports and durable industrial-grade materials to support efficient wiring, straightforward servicing and reliable electrical interfaces.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.