Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.47
The WAGO 231-305/008-000 is a robust and reliable 5-pole pluggable female terminal block connector with snap-in mounting feet, designed for secure electrical connections in industrial automation, control panels and electronic equipment. As part of the established WAGO 231 MCS MIDI Classic connector series, it combines dependable conductor termination with a practical panel-mounting arrangement for industrial electrical installations.
Featuring WAGO's proven CAGE CLAMP® spring pressure connection technology, the connector provides reliable, screwless conductor termination for solid and fine-stranded conductors. Its integrated snap-in mounting feet allow the connector to be mechanically secured to suitable panels or housing sections, simplifying installation and providing additional stability in electrical assemblies.
With a 5.08 mm contact pitch, 5-pole configuration, 16 A IEC rated current and conductor capacity of 0.08–2.5 mm², the WAGO 231-305/008-000 is suitable for industrial control wiring, PCB interconnections and modular electrical systems. Its distinctive orange housing, integrated test ports and coding features support straightforward installation, inspection and maintenance.
Electrical rating note: IEC voltage ratings depend on the applicable overvoltage category and pollution degree. UL ratings depend on the relevant approval standard and use group. The permissible operating current also depends on conductor size, ambient temperature and the complete mated connector arrangement. The connector must not be connected or disconnected while energised or under load.
The WAGO 231-305/008-000 combines CAGE CLAMP® spring pressure conductor termination with an integrated snap-in mounting system. The spring pressure mechanism secures electrical conductors without conventional screw terminals, helping maintain consistent contact pressure under normal industrial vibration and temperature changes.
The snap-in mounting feet allow the connector to be fitted into suitable prepared mounting holes in panels or equipment housings. Designed for panel thicknesses of 0.6–1.2 mm, this arrangement supports straightforward assembly without requiring a separate screw flange locking mechanism. The integrated anti-rotation protection also helps maintain stable connector positioning within the mounting arrangement.
The connector's five independent electrical connection points make it suitable for multi-conductor control circuits, industrial power interfaces and modular electronic equipment. Integrated test ports provide convenient access for electrical measurements, while coding fingers allow connector configurations to be differentiated when used with compatible mating components.
As part of the WAGO MCS MIDI Classic system, the 231-305/008-000 supports efficient cable pre-assembly and equipment wiring. Its pluggable architecture allows electrical connections to be disconnected for maintenance or component replacement after the relevant circuits have been safely isolated.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 21.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 5 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | 231 MCS MIDI Classic | |
| Model | 231-305/008-000 | |
| Product type | Pluggable female terminal block connector | |
| Connector gender | Female | |
| Number of connection points | 5 | |
| Number of potentials | 5 | |
| Conductors per pole | 1 | |
| Number of levels | 1 | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Pin spacing | 5.08 mm | |
| Rated current (IEC) | 16 A | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated voltage (UL 1977) | 600 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size (AWG) | 28–12 AWG | |
| Wire stripping length | 8–9 mm | |
| Conductor entry | 0° relative to mating direction | |
| Actuation | Operating tool | |
| Actuation direction | Parallel or perpendicular to conductor entry | |
| Mounting type | Snap-in mounting feet / panel mounting | |
| Snap-in mounting hole diameter | 3.5 mm (+0.1 mm tolerance) | |
| Compatible panel thickness | 0.6–1.2 mm | |
| Anti-rotation protection | Yes | |
| Variable coding | Yes | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Flammability rating | UL94 V-0 | |
| Temperature limit range | −60 to +85 °C | |
| Dimensions (H × W × D) | 18.8 × 26.9 × 26.45 mm | |
| Height above mounting surface | 14.3 mm | |
| Weight | Approx. 9.35 g | |
| GTIN / EAN | 4044918346207 |
The WAGO 231-305/008-000 is a 5-pole pluggable female connector used to connect electrical conductors to compatible male headers in industrial automation, control panels, machinery and electronic equipment. Its snap-in mounting feet allow installation in suitable panels and equipment housings.
The connector features integrated snap-in mounting feet designed to fit prepared mounting holes with a diameter of 3.5 mm and a +0.1 mm tolerance. It supports panel thicknesses of 0.6–1.2 mm, allowing secure mechanical positioning without a separate screw flange.
The connector supports solid and fine-stranded conductors from 0.08–2.5 mm² (28–12 AWG). Fine-stranded conductors fitted with insulated ferrules are supported from 0.25–1.5 mm², while uninsulated ferrules are supported from 0.25–2.5 mm².
The WAGO 231-305/008-000 has an IEC rated current of 16 A and a rated voltage of 320 V under overvoltage category III and pollution degree 3. A rating of 630 V applies under IEC overvoltage category II and pollution degree 2.
No. The WAGO MCS MIDI Classic connector system uses connectors without breaking capacity under DIN EN 61984. The 231-305/008-000 must not be connected or disconnected while live or under load. Electrical circuits should be safely isolated before disconnecting the connector.
WAGO MCS MIDI Classic connectors are designed to provide dependable, space-efficient electrical interconnections for industrial machinery, automation systems and electronic equipment. The 231-305/008-000 combines proven CAGE CLAMP® spring connection technology with practical snap-in panel mounting, making it a reliable choice for electrical engineers, panel builders and OEM equipment manufacturers.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.