Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.01
The WAGO 231-304/102-000 is a 4-pole, 1-conductor-per-pole female connector from the WAGO MCS MIDI Classic 231 Series. Featuring CAGE CLAMP® spring-pressure connection technology, a 5.08 mm pin spacing and an integrated end plate, this orange pluggable connector is designed for dependable electrical connections in industrial automation, control systems and electronic equipment.
The integrated end plate provides a space-efficient connector design, with an overall width of 20.32 mm for the four-pole configuration. This construction is particularly useful where installation space is limited and multiple electrical connections must be accommodated within a compact assembly. The detachable female connector interface also facilitates cable pre-assembly, equipment installation and maintenance.
Designed to accommodate solid and fine-stranded copper conductors from 0.08 to 2.5 mm², the WAGO 231-304/102-000 provides a 16 A IEC rated current and voltage ratings up to 630 V, depending on the applicable overvoltage category and pollution degree. Its CAGE CLAMP® connection system eliminates conventional screw tightening, while its durable polyamide housing and tin-plated contacts make it suitable for demanding industrial electrical applications.
The WAGO 231-304/102-000 combines proven CAGE CLAMP® spring-pressure termination with the modular flexibility of the MCS MIDI Classic connector system. The clamping springs maintain conductor contact pressure independently of conventional screw-tightening torque, helping provide dependable electrical connections. The connector accepts multiple conductor constructions and enables cable assemblies to be prepared before installation.
Its integrated end plate reduces the overall connector width to the number of poles multiplied by the pin spacing, providing a compact four-pole connection solution. The orange PA66 housing, tin-plated copper alloy contacts and chrome-nickel spring steel clamping elements support industrial use. The connector must be installed with a compatible mating component, and plug-in connections without breaking capacity must not be connected or disconnected while live or under load.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 21.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 4 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic / 231 Series | |
| Manufacturer part number | 231-304/102-000 | |
| Product type | Pluggable female connector | |
| Connector design | 1-conductor female connector with integrated end plate | |
| Number of potentials | 4 | |
| Total connection points | 4 | |
| Conductors per pole | 1 | |
| Number of levels | 1 | |
| Contact gender | Female | |
| Pin spacing | 5.08 mm | |
| Connection technology | CAGE CLAMP® | |
| Actuation type | Operating tool | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Conductor entry direction | 0° relative to mating direction | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Width | 20.32 mm | |
| Height | 14.3 mm | |
| Depth | 26.45 mm | |
| Weight | Approximately 7.2 g | |
| Insulation material | Polyamide 66 (PA66) | |
| Material group | I | |
| Flammability classification | UL 94 V-0 | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel (CrNi) | |
| Temperature limit range | −60 to +85 °C | |
| Processing temperature | −35 to +60 °C | |
| Integrated end plate | Yes | |
| Integrated test ports | Yes | |
| Connector coding | Coding fingers | |
| Connection system | WAGO MULTI CONNECTION SYSTEM (MCS) | |
| Country of origin | Germany | |
| GTIN | 4044918346184 | |
| RoHS compliance | Compliant, without exemption | |
| Standard packaging unit | 100 pieces |
The WAGO 231-304/102-000 is a 4-pole female pluggable connector with an integrated end plate, designed for detachable electrical connections in industrial automation, electronic equipment and control assemblies. It uses CAGE CLAMP® spring-pressure conductor termination.
The integrated end plate eliminates the need for a separate end plate and reduces the overall connector width. The four-pole WAGO 231-304/102-000 measures 20.32 mm wide, making it suitable for compact industrial electronic assemblies.
The connector accepts solid and fine-stranded copper conductors from 0.08 to 2.5 mm², equivalent to 28–12 AWG. Fine-stranded conductors with insulated ferrules are supported from 0.25 to 1.5 mm², while those with uninsulated ferrules are supported from 0.25 to 2.5 mm².
The connector has an IEC rated current of 16 A, with rated voltages of 320 V under overvoltage category III, pollution degree 3, and 630 V under overvoltage category II, pollution degree 2. Its rated impulse voltage is 4 kV.
No. The WAGO 231-304/102-000 uses CAGE CLAMP® spring-pressure connection technology. Conductors are terminated using an appropriate operating tool, without conventional screw tightening. The recommended conductor stripping length is 8–9 mm.
WAGO MCS MIDI Classic connectors offer industrial automation engineers, panel builders and equipment manufacturers a dependable solution for modular electrical connections. The 231-304/102-000 combines a compact four-pole design, integrated end plate, CAGE CLAMP® termination and a 5.08 mm contact pitch for efficient wiring in compatible industrial electronic assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.