Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.90
The WAGO 231-303/107-000 is a robust and reliable 3-pole pluggable female terminal block connector with screw flange, designed for secure electrical connections in industrial automation, control panels and electronic equipment. As part of the established WAGO 231 MCS MIDI Classic connector series, it combines dependable conductor termination with a mechanically secure pluggable connection for demanding industrial applications.
Featuring WAGO's proven CAGE CLAMP® spring pressure connection technology, the connector provides reliable, screwless conductor termination while accommodating different conductor types. Its integrated screw flange locking system enables the connector to be secured to a compatible mating header, helping prevent unintended disconnection caused by vibration or mechanical movement.
With a 5.08 mm contact pitch, 3-pole configuration, 16 A IEC rated current and conductor capacity of 0.08–2.5 mm², the WAGO 231-303/107-000 is suitable for industrial control wiring, PCB interconnections and modular electrical equipment. Its distinctive orange housing, integrated test ports and coding features support straightforward installation, inspection and maintenance.
Electrical rating note: IEC voltage ratings depend on the applicable overvoltage category and pollution degree. The maximum operating current also depends on conductor size, ambient temperature and the complete mated connector arrangement. The connector is not intended to be connected or disconnected while energised or under load.
The WAGO 231-303/107-000 combines two important connection technologies: CAGE CLAMP® spring pressure conductor termination and a screw flange locking interface. The spring pressure system maintains consistent electrical contact without relying on conventional screw terminal tightening, while the screw flange provides additional mechanical retention between the female connector and a compatible male header.
This combination is particularly valuable in industrial machinery and automation systems where equipment may experience vibration, mechanical movement or repeated maintenance operations. The screw flange helps maintain a secure mated connection, while the pluggable construction allows wiring assemblies to be prepared separately before final equipment installation.
The connector also incorporates integrated test ports and coding fingers, supporting convenient circuit inspection and helping reduce incorrect mating when a suitable coding system is implemented. Its compact 3-pole design and 5.08 mm pitch make it suitable for control signals, power supply connections and modular electrical interfaces in industrial equipment.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 21.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 3 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | 231 MCS MIDI Classic | |
| Model | 231-303/107-000 | |
| Product type | Pluggable female terminal block connector | |
| Connector gender | Female | |
| Number of connection points | 3 | |
| Conductors per pole | 1 | |
| Number of levels | 1 | |
| Connection technology | CAGE CLAMP® spring pressure connection | |
| Pin spacing | 5.08 mm | |
| Rated current (IEC) | 16 A | |
| Rated current (UL) | 15 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated voltage (UL) | 600 V | |
| Rated impulse voltage (IEC, III/3) | 4 kV | |
| Conductor cross-section | 0.08–2.5 mm² | |
| Conductor size (AWG) | 28–12 AWG | |
| Wire stripping length | 8–9 mm | |
| Conductor entry | 180° in-line configuration | |
| Actuation | Operating tool | |
| Locking mechanism | Screw flange | |
| Additional retention | Locking latch | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Flammability rating | UL94 V-0 | |
| Operating temperature range | −60 to +85 °C | |
| Mounting type | Free-hanging / in-line pluggable connection | |
| Dimensions (H × W × D) | Approx. 14.3 × 25.24 × 26.45 mm | |
| GTIN / EAN | 4044918369879 |
The WAGO 231-303/107-000 is a 3-pole pluggable female connector used to connect electrical conductors to compatible male headers in industrial automation, control panels, machinery and PCB-based electrical equipment.
The screw flange locking system provides mechanical retention between the connector and a compatible mating header, helping prevent unintended disconnection caused by vibration or mechanical movement.
The connector supports conductor cross-sections from 0.08–2.5 mm² (28–12 AWG), with the permitted range depending on conductor type and preparation. It uses CAGE CLAMP® spring pressure technology for secure conductor termination.
The connector has an IEC rated current of 16 A and an IEC rated voltage of 320 V under overvoltage category III and pollution degree 3. Higher voltage ratings apply under other specified conditions.
No. The WAGO MCS MIDI Classic connector system includes connectors without breaking capacity under DIN EN 61984. The 231-303/107-000 must not be connected or disconnected while live or under load, and the circuit should be designed so accessible header pins are not energised when unmated.
WAGO MCS MIDI Classic connectors are engineered for dependable electrical interconnections in industrial machinery, automation systems and electronic equipment. The 231-303/107-000 combines proven CAGE CLAMP® spring technology with secure screw flange retention, providing a practical connection solution for engineers, panel builders and OEM equipment manufacturers.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.