Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.52
The WAGO 231-303/026-000 is a 3-pole female pluggable connector from the WAGO MCS MIDI Classic Series 231. Featuring CAGE CLAMP® spring-pressure connection technology, a 5.08 mm contact pitch and an orange insulating housing, this connector provides a practical solution for industrial automation, electronic control equipment and modular electrical wiring.
Designed with one conductor connection per pole, the WAGO 231-303/026-000 accommodates suitable solid and fine-stranded conductors from 0.08–2.5 mm². Its CAGE CLAMP® terminals eliminate conventional screw-terminal tightening, while vertical and horizontal actuation options facilitate cable pre-assembly and wiring directly at the equipment.
With a 16 A IEC rated current, a 5.08 mm contact pitch and integrated test ports, the WAGO 231-303/026-000 supports dependable electrical interconnections. Its three-pole configuration, coding fingers and free-hanging design make it suitable for detachable wiring assemblies where a compatible male connector is used.
The WAGO 231-303/026-000 provides a modular connection interface for industrial electrical wiring. Its CAGE CLAMP® spring-pressure terminals support secure conductor termination, while the integrated test ports allow electrical measurements to be taken during installation, commissioning and troubleshooting.
For industrial automation equipment, the three-pole arrangement provides a convenient connection point between cable assemblies and compatible electronic equipment. The free-hanging design supports detachable wiring harnesses, and the integrated coding fingers allow suitable coding arrangements within the MCS MIDI Classic system.
Important installation note: WAGO identifies this connector as having no plug-in locking mechanism. It must be used with a mechanically compatible mating connector, and the complete connection must be assessed for the intended installation conditions. In accordance with WAGO's safety guidance for this connector system, it must not be connected or disconnected while live or under load.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 21.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 3 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic / Series 231 | |
| Model | 231-303/026-000 | |
| Manufacturer part number | 231-303/026-000 | |
| Product type | 1-conductor female pluggable connector | |
| Connector gender | Female | |
| Number of potentials | 3 | |
| Number of connection points | 3 | |
| Number of levels | 1 | |
| Conductors per pole | 1 | |
| Contact pitch | 5.08 mm | |
| Connection technology | CAGE CLAMP® | |
| Actuation type | Operating tool | |
| Mounting type | Free-hanging / in-line | |
| Plug-in connection locking | None | |
| Conductor entry direction relative to mating direction | 0° | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC) | 320 V under the applicable rated insulation conditions | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1977) | 15 A | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Flammability classification | UL 94 V-0 | |
| Operating temperature range | -60 to +85 °C | |
| Width | 16.74 mm | |
| Height | 14.3 mm | |
| Depth | 26.45 mm | |
| Weight | 5.7 g | |
| Integrated test ports | Yes | |
| Coding fingers | Yes | |
| Standard packaging unit | 100 pieces | |
| Country of origin | Germany | |
| GTIN / EAN | 4044918345231 |
The WAGO 231-303/026-000 is a 3-pole female pluggable connector from the MCS MIDI Classic Series 231. It is designed to terminate conductors using CAGE CLAMP® technology and form detachable electrical connections with compatible male connectors in industrial equipment.
The connector accepts suitable solid and fine-stranded conductors from 0.08–2.5 mm², corresponding to 28–12 AWG. Fine-stranded conductors with insulated ferrules are supported from 0.25–1.5 mm², while those with uninsulated ferrules are supported from 0.25–2.5 mm². The conductor stripping length is 8–9 mm.
The connector has an IEC rated current of 16 A and an IEC rated voltage of 320 V under applicable insulation conditions. It also has a 15 A, 600 V rating under UL 1977. The permissible rating of the complete assembly depends on its mating component and installation conditions.
No. WAGO specifies no plug-in connection locking mechanism for the 231-303/026-000. It is a free-hanging female connector, and the suitability of the mating connection must be assessed for the installation environment.
No. WAGO's safety information states that connectors in this system without breaking capacity must not be connected or disconnected while live or under load. The circuit must be safely isolated before mating or unmating, and the equipment design should prevent accessible header contacts from remaining live when disconnected.
WAGO MCS MIDI Classic connectors provide modular electrical connectivity for industrial automation, control equipment and OEM machinery. The WAGO 231-303/026-000 combines three-pole CAGE CLAMP® termination, 5.08 mm contact spacing and integrated test ports to support efficient wiring, cable assembly and maintenance of compatible industrial electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.