Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.10
The WAGO 231-302/026-000 is a 2-pole orange female pluggable connector from the WAGO MCS MIDI Classic Series 231. Featuring proven CAGE CLAMP® spring-pressure connection technology, a 5.08 mm contact pitch and a conductor capacity of up to 2.5 mm², it provides a practical solution for modular electrical wiring in industrial automation, control equipment and electronic assemblies.
Designed with one conductor connection per pole, this female connector accommodates solid and fine-stranded copper conductors from 0.08 to 2.5 mm² (28–12 AWG). Its screwless spring-clamp termination eliminates the need for terminal tightening torque and supports efficient conductor installation and removal using a suitable operating tool.
The WAGO 231-302/026-000 has an IEC rated current of 16 A and voltage ratings of 320 V under categories III/3 and III/2 and 630 V under category II/2. Its 4 kV rated impulse voltage and durable orange PA66 housing make it suitable for appropriately designed industrial electrical applications.
With its compact dimensions, integrated coding capability and convenient CAGE CLAMP® actuation, the WAGO 231-302/026-000 is well suited to applications requiring detachable wire-to-board or compatible wire-to-wire connections.
Temperature specification note: Manufacturer datasheet revisions have published different upper limit temperatures for this article, including +85 °C and +100 °C. Confirm the temperature range applicable to the current supplied revision before specifying the connector for temperature-sensitive equipment.
The WAGO 231-302/026-000 uses WAGO's established CAGE CLAMP® connection technology to secure electrical conductors without conventional terminal screws.
Inside each connection position, a spring-pressure mechanism applies the necessary clamping force to the inserted conductor. This design supports reliable electrical contact and eliminates the need for periodic screw-terminal retightening.
The connector accommodates solid and fine-stranded copper conductors from 0.08 to 2.5 mm², allowing it to be used with a broad range of industrial wiring sizes.
Fine-stranded conductors may also be terminated using suitable ferrules, subject to the manufacturer's specified cross-section limits:
The required 8–9 mm stripping length helps ensure that the conductor is correctly positioned within the terminal while limiting unnecessary exposed copper.
The WAGO 231-302/026-000 supports operating-tool actuation both parallel and perpendicular to the conductor entry direction. This provides useful flexibility during connector assembly and maintenance, particularly where surrounding equipment limits access to the termination area.
To connect a conductor, the installer operates the CAGE CLAMP® mechanism using the appropriate tool, inserts the correctly prepared conductor and then releases the spring clamp to secure the connection.
The same operating principle allows conductors to be removed when maintenance or rewiring is required.
For safe and reliable installation, always use a tool and operating procedure approved for the connector. Do not force an unsuitable screwdriver or other improvised object into the actuation opening.
The orange PA66 housing provides a distinctive appearance that helps distinguish the WAGO 231-302/026-000 from other connector variants within the Series 231 range.
Its compact dimensions of 11.66 × 14.3 × 26.45 mm make it suitable for electrical assemblies where installation space is limited.
The connector incorporates variable coding capability, allowing compatible coding arrangements to be used where multiple similar pluggable connections are installed in the same equipment.
It also features anti-rotation protection, supporting correct connector alignment. However, the manufacturer identifies this variant as having no dedicated mismating protection and no integrated plug-in locking mechanism.
Where additional retention, coding or mechanical protection is required, the complete mating arrangement should be assessed and suitable manufacturer-approved accessories selected.
The WAGO 231-302/026-000 has an IEC rated current of 16 A and several voltage ratings corresponding to different installation conditions.
Its 4 kV rated impulse voltage applies to the specified IEC insulation categories.
Separate UL ratings are also published, including 600 V / 15 A under UL 1977 and ratings under UL 1059. These values are associated with different approval conditions and must not be combined indiscriminately.
The actual permitted rating of a completed connection depends on the selected male counterpart, conductor cross-section, ambient conditions, equipment design and applicable installation standard.
The WAGO 231-302/026-000 is a female pluggable connector and requires a compatible male connector or header to establish the electrical mating interface.
Before selecting a counterpart, confirm:
Matching the contact pitch and pole count is necessary but does not guarantee full compatibility. Always verify the exact male connector part number against WAGO's current compatibility documentation.
Important safety information: The WAGO 231-302/026-000 must not be connected or disconnected while live or under load unless the complete connection system is specifically approved for that purpose. Electrical equipment should be safely isolated before installation or maintenance.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 21.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 2 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-302/026-000 | |
| Product family | MCS MIDI Classic Series 231 | |
| Product type | 1-conductor female pluggable connector | |
| Connector gender | Female / socket | |
| Number of electrical potentials | 2 | |
| Number of connection points | 2 | |
| Number of connection levels | 1 | |
| Number of connection types | 1 | |
| Conductors per pole | 1 | |
| Contact pitch | 5.08 mm | |
| Connection technology | CAGE CLAMP® | |
| Termination method | Spring-pressure clamp | |
| Actuation method | Operating tool | |
| Actuation direction | Parallel or perpendicular to conductor entry | |
| Conductor entry relative to mating direction | 0° | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor range | 28–12 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 8–9 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, category III/3) | 320 V | |
| Rated voltage (IEC, category III/2) | 320 V | |
| Rated voltage (IEC, category II/2) | 630 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 15 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1977) | 15 A | |
| Width | 11.66 mm | |
| Height | 14.3 mm | |
| Depth | 26.45 mm | |
| Dimensions (W × H × D) | 11.66 × 14.3 × 26.45 mm | |
| Flammability classification | UL94 V-0 | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel (CrNi) | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Dedicated mismating protection | No | |
| Plug-in locking mechanism | Without | |
| Mounting arrangement | Free-hanging / in-line connector | |
| GTIN / EAN | 4044918344661 | |
| Country of origin | Germany |
The WAGO 231-302/026-000 is a 2-pole orange female pluggable connector from the MCS MIDI Classic Series 231. It features CAGE CLAMP® termination, 5.08 mm contact spacing and a conductor capacity of up to 2.5 mm².
The connector has 2 poles, with one conductor connection per pole and two independent electrical potentials.
The WAGO 231-302/026-000 has a 5.08 mm contact pitch.
It uses WAGO CAGE CLAMP® spring-pressure connection technology, allowing conductors to be securely terminated without conventional terminal screws.
The connector accepts solid and fine-stranded copper conductors from 0.08 to 2.5 mm² (28–12 AWG). Different limits apply when ferrules are used.
Yes. Fine-stranded conductors with insulated ferrules from 0.25 to 1.5 mm² and uninsulated ferrules from 0.25 to 2.5 mm² are supported, subject to WAGO's installation requirements.
The specified conductor stripping length is 8–9 mm.
The connector has an IEC rated current of 16 A. The permitted current in the completed connection also depends on the mating connector and operating conditions.
The connector has IEC rated voltages of 320 V under categories III/3 and III/2 and 630 V under category II/2. Its rated impulse voltage is 4 kV.
The connector measures 11.66 mm wide, 14.3 mm high and 26.45 mm deep.
The connector has an orange polyamide 66 (PA66) housing with a UL94 V-0 flammability classification. Its contacts are made from tin-plated copper alloy.
The manufacturer identifies the connector as having no integrated plug-in locking mechanism. It does support variable coding and anti-rotation protection.
The connector should not be connected or disconnected while live or under load unless the complete connection system is specifically approved for that operation. Electrical equipment should be safely isolated before servicing.
The WAGO 231-302/026-000 combines a two-pole female connector design, 5.08 mm contact pitch and proven CAGE CLAMP® spring-pressure technology to support dependable modular electrical connections. With its 16 A IEC rated current, broad conductor compatibility, orange PA66 housing and compact dimensions, it is a practical solution for industrial automation, control electronics and serviceable electrical equipment.
For current technical specifications, installation details and compatible accessories, refer to the official WAGO 231-302/026-000 product page.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.