Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.64
The WAGO 231-273/001-000 is a high-quality 13-pole male PCB header from the WAGO MCS MIDI Classic 231 Series. Designed for industrial automation, electronic control systems and printed circuit board assemblies, this connector features 1.2 × 1.2 mm straight solder pins, a 7.5 mm contact pitch and a durable grey insulating housing.
Using through-hole technology (THT), the WAGO 231-273/001-000 provides thirteen individual electrical contacts that can be soldered directly to a printed circuit board. Its shrouded male connector design enables detachable electrical connections when paired with an appropriately selected female connector from the WAGO MCS MIDI Classic system.
The connector is specified with a 16 A IEC rated current and IEC voltage ratings of up to 1000 V under applicable installation conditions. Its tin-plated electrolytic copper contacts, UL94 V-0 polyamide housing and operating temperature range of -60 to +100 °C make it suitable for demanding industrial electronic applications.
With its straight PCB mounting arrangement, thirteen contact positions and modular pluggable construction, the WAGO 231-273/001-000 provides an efficient solution for manufacturers seeking reliable PCB-to-wire connectivity, straightforward assembly and convenient equipment servicing.
The WAGO MCS MIDI Classic 231 Series provides modular electrical connection solutions for industrial automation, electronic control equipment and printed circuit board assemblies. Its pluggable architecture allows electronic modules to interface with detachable cable assemblies through compatible male and female connector components.
The WAGO 231-273/001-000 features thirteen straight solder pins manufactured with a 1.2 × 1.2 mm square cross-section. These pins are designed for through-hole soldering, providing a permanent electrical connection to the PCB while maintaining a detachable mating interface for external wiring.
Unlike female cable connectors that use spring-pressure conductor termination, this male PCB header is soldered directly to the circuit board. Compatible female connectors may use WAGO CAGE CLAMP® technology to terminate external conductors, allowing manufacturers to prepare wiring assemblies separately from the electronic module.
The connector features a 7.5 mm contact pitch, providing thirteen electrical contact positions within an overall housing length of 98.2 mm. Its straight solder pins establish a 90° mating direction relative to the PCB, making it suitable for vertical connector engagement on appropriately designed circuit boards.
The four-sided shrouded housing provides a defined mating interface and helps guide compatible female connector components into position. The grey polyamide construction offers durable electrical insulation, while tin-plated electrolytic copper contacts support reliable electrical performance.
For industrial installations, the connector provides a 16 A IEC rated current and voltage ratings that depend on the applicable overvoltage category and pollution degree. The complete connector assembly must be assessed using the ratings of both mating components and the relevant installation requirements.
WAGO MCS connectors without breaking capacity must not be connected or disconnected while energised or under load. Equipment design should also prevent accessible male contacts from remaining live when the mating connector is removed.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 7.5 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 13 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-273/001-000 | |
| Series | 231 | |
| Product family | MCS MIDI Classic | |
| Product category | PCB headers and pluggable connectors | |
| Product type | THT male PCB header | |
| Connector gender | Male | |
| Number of contact positions | 13 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Contact pitch | 7.5 mm | |
| Termination technology | Through-hole soldering (THT) | |
| Solder pin orientation | Straight | |
| Solder pin cross-section | 1.2 × 1.2 mm | |
| Solder pin length | 5 mm | |
| PCB mounting type | Through-hole | |
| Mating direction relative to PCB | 90° | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1000 V | |
| Rated impulse voltage | 6 kV | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | 600 V | |
| Overall connector length | 98.2 mm | |
| Insulation height above PCB | 12 mm | |
| Connector housing | Four-sided shrouded | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Housing material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Operating temperature range | -60 to +100 °C | |
| GTIN/EAN | 4044918929455 | |
| Standard packaging unit | 50 pieces | |
| Relevant standards | IEC/EN 61984, UL 1059 and UL 1977, subject to applicable approval conditions |
The WAGO 231-273/001-000 is a thirteen-pole male PCB header designed for through-hole soldering onto printed circuit boards. It provides a detachable electrical interface when paired with a compatible female pluggable connector.
The connector has 13 poles, providing thirteen separate electrical contact positions arranged in a single row.
It is a male PCB header with straight solder pins. It is designed to mate with an appropriately selected female connector from the WAGO MCS MIDI Classic connection system.
The connector features a 7.5 mm contact pitch, meaning adjacent electrical contact positions are spaced 7.5 mm apart.
The connector has an IEC rated current of 16 A and a UL rated current of 15 A. The permissible current of the complete assembly also depends on the mating connector and installation conditions.
The IEC rated voltage is 500 V for overvoltage category III, pollution degree 3; 630 V for category III, pollution degree 2; and 1000 V for category II, pollution degree 2. The connector also has a 600 V UL voltage rating.
The connector is mounted directly onto a printed circuit board using through-hole soldering. Its straight solder pins are inserted into appropriately sized PCB holes and soldered to the circuit board.
Each solder pin has a 1.2 × 1.2 mm square cross-section and a length of 5 mm. PCB hole dimensions and the recommended footprint should follow the manufacturer's technical drawing.
The connector has an overall length of 98.2 mm, calculated using WAGO's dimensional formula: (13 − 1) × 7.5 mm + 8.2 mm.
No. This product is a THT male PCB header that uses solder pins for circuit board termination. Compatible female cable connectors may use WAGO CAGE CLAMP® spring-pressure technology for conductor connections.
Both are straight male PCB headers from the WAGO MCS MIDI Classic 231 Series with a 7.5 mm contact pitch. The 231-240/001-000 has ten poles and 1.0 × 1.0 mm solder pins, while the 231-273/001-000 has thirteen poles and 1.2 × 1.2 mm solder pins.
No. The connector is not intended for load-breaking operation. The electrical circuit must be safely isolated before mating or unmating, and accessible male contacts must not remain live when disconnected.
WAGO MCS MIDI Classic connectors provide dependable modular electrical connection solutions for industrial automation engineers, PCB designers, control panel builders and electronic equipment manufacturers. The WAGO 231-273/001-000 combines thirteen male contacts, a 7.5 mm pitch, a 16 A IEC current rating and robust 1.2 × 1.2 mm through-hole solder pins to support reliable PCB interconnections, efficient equipment assembly and maintenance-friendly industrial electronic systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.