Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.44
The WAGO 231-272/001-000 is a robust and reliable 12-pole through-hole technology (THT) male PCB header designed for secure and efficient electrical connections in industrial control equipment, electronic assemblies and automation systems. As part of the WAGO 231 Series MCS MIDI Classic pluggable connector range, it provides a practical solution for connecting removable terminal blocks and compatible female connectors to printed circuit boards.
This PCB connector features a 7.5 mm pin spacing and straight 1.2 × 1.2 mm solder pins, providing reliable mechanical stability and electrical conductivity. Its 12-pole configuration enables multiple electrical circuits to be connected through a single compact interface, helping simplify PCB layouts, equipment assembly and maintenance. The connector also incorporates coding fingers and anti-rotation protection to support dependable installation and connection.
With a rated current of 16 A and IEC rated voltages of up to 1000 V, depending on the applicable overvoltage category and pollution degree, the WAGO 231-272/001-000 is suitable for industrial electronic equipment requiring dependable board-level interconnections. Its vertical through-hole mounting design, tin-plated copper contacts and flame-retardant polyamide housing make it well suited to industrial control panels, power electronics and automation equipment.
The WAGO 231-272/001-000 is designed to establish a dependable electrical interface between a printed circuit board and a compatible pluggable connector. Its male contacts are soldered directly into the PCB using through-hole technology, providing a secure connection capable of withstanding the mechanical demands associated with industrial electronic equipment.
The WAGO MCS MIDI Classic connection system allows compatible female connectors to be plugged into and removed from the PCB header without repeatedly soldering or disconnecting individual conductors. This approach can simplify manufacturing, commissioning, troubleshooting and maintenance. The connector's 12-pole arrangement supports multiple electrical connections within a single component, while its coding features help with correct connector selection and assembly.
The connector's tin-plated copper contacts and flame-retardant PA66 housing provide a combination of electrical performance, insulation and mechanical durability. Its rated current and voltage characteristics make it suitable for a variety of industrial control and power distribution interfaces when installed in accordance with the relevant electrical standards and application requirements.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 16 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 7.5 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 12 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | 231 Series / MCS MIDI Classic | |
| Model | 231-272/001-000 | |
| Product type | THT male PCB header / pluggable PCB connector | |
| Connector gender | Male | |
| Number of potentials | 12 | |
| Number of levels | 1 | |
| Contact pitch | 7.5 mm | |
| Rated current (IEC) | 16 A | |
| Rated current (UL 1977) | 15 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1000 V | |
| Rated voltage (UL 1977) | 600 V | |
| Rated impulse voltage | 6 kV | |
| Mounting type | PCB through-hole mounting (THT) | |
| Connector orientation | Straight / vertical | |
| Termination method | Solder | |
| Solder pin dimensions | 1.2 × 1.2 mm | |
| Solder pin length | 5 mm | |
| Recommended PCB hole diameter | 1.7 mm (+0.1 mm tolerance) | |
| Solder pins per potential | 1 | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Material group | I | |
| Operating temperature range | −60 to +100 °C | |
| Coding capability | Yes | |
| Anti-rotation protection | Yes | |
| Dimensions (W × H × D) | 90.7 × 17 × 8.4 mm | |
| Height above PCB surface | 12 mm | |
| Weight | approx. 5.6 g | |
| Country of origin | Germany |
The WAGO 231-272/001-000 is a 12-pole male PCB header used to create pluggable electrical connections between printed circuit boards and compatible female connectors in industrial automation, control equipment and electronic assemblies.
This connector features 12 poles arranged in a single row with a 7.5 mm pitch, allowing 12 separate electrical potentials to be connected through one PCB header.
The WAGO 231-272/001-000 has an IEC rated current of 16 A and a UL 1977 rated current of 15 A. The applicable current rating depends on the relevant standard and installation conditions.
The connector is rated at 500 V for IEC category III/3, 630 V for IEC category III/2 and 1000 V for IEC category II/2. The applicable voltage rating must be selected according to the installation's overvoltage category and pollution degree.
The connector uses through-hole technology (THT) with straight 1.2 × 1.2 mm solder pins. It is installed vertically on a printed circuit board and secured by soldering the pins into suitable PCB holes.
The WAGO 231-272/001-000 has a 7.5 mm pin spacing, making it suitable for compatible connectors from the WAGO 231 Series pluggable connection system.
The connector features tin-plated electrolytic copper contacts and a grey polyamide 66 (PA66) insulating housing with a UL94 V-0 flammability classification.
Yes. The connector is designed for industrial PCB interconnections and is suitable for control electronics, automation equipment, power supply assemblies and other industrial systems requiring reliable pluggable electrical connections.
The WAGO 231-272/001-000 has a specified temperature range of −60 to +100 °C, supporting use in a wide range of industrial electronic applications.
Yes. The connector incorporates coding fingers and anti-rotation protection to support reliable mechanical positioning and connection with compatible mating components.
WAGO 231 Series MCS MIDI Classic connectors provide dependable, modular PCB interconnection solutions for industrial automation engineers, electronic equipment manufacturers and OEM machine builders. The WAGO 231-272/001-000 combines a 12-pole configuration, 16 A IEC current rating, robust through-hole solder termination and high-quality insulating materials to support reliable electrical connections in demanding industrial applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.