Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£8.49
The WAGO 231-2711/026-000 is an 11-pole, 2-conductor female pluggable connector from the WAGO MCS MIDI Classic 231 series. Designed for industrial electrical connections, it combines Push-in CAGE CLAMP® technology, a 7.62 mm contact pitch and an integrated end plate to provide a reliable, detachable connection interface for control panels, machinery and electronic equipment.
Featuring 22 conductor connection points across 11 electrical potentials, the connector allows two conductors to be terminated at each pole. This makes it particularly suitable for loop-through wiring arrangements, including the distribution of power and control signals between compatible equipment assemblies.
With a 16 A IEC rated current and voltage ratings of up to 1000 V under specified IEC insulation coordination conditions, the WAGO 231-2711/026-000 offers dependable performance for appropriately rated electrical circuits. Its orange PA66 housing, tin-plated copper-alloy contacts and screwless spring-pressure terminals support efficient installation and long-term connection reliability.
The WAGO MCS MIDI Classic series offers modular electrical connection solutions for industrial automation, machinery and electronic equipment. Its range of female connectors and compatible male headers allows manufacturers to create detachable wiring interfaces while maintaining dependable conductor termination.
The WAGO 231-2711/026-000 features eleven electrical poles, each with two conductor entries. This arrangement is particularly useful for loop-through wiring, allowing two conductors to share an electrical potential without requiring a separate external bridging terminal.
The connector's Push-in CAGE CLAMP® technology uses spring-pressure terminals to secure suitable conductors. Solid and appropriately ferruled conductors can be connected efficiently, while an operating tool enables conductor actuation when required. This supports consistent wiring practices and avoids routine screw-tightening procedures.
Its 7.62 mm contact pitch provides a defined interface for compatible MCS MIDI Classic mating components. The integrated end plate completes the connector housing, while the orange PA66 insulation and tin-plated copper-alloy contacts support reliable operation in industrial electrical assemblies.
The 231-2711/026-000 has no integrated mismating protection. Engineers should therefore verify the mating connector's pole count, pitch, mechanical configuration and electrical ratings before installation. The complete connection assembly must remain within the limits of its lowest-rated component, and connectors must not be mated or unmated under load unless expressly approved by the manufacturer.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.2 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.2 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 7.62 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 7.62 mm | |
| Number of poles | 11 | |
| Material of contact surface | Tin | |
| Rated voltage | 630 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.2 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer Part Number | 231-2711/026-000 | |
| Series | MCS MIDI Classic 231 | |
| Product Type | 2-conductor female pluggable connector | |
| Connector Gender | Female / socket | |
| Number of Electrical Potentials | 11 | |
| Conductor Entries per Pole | 2 | |
| Total Conductor Connection Points | 22 | |
| Number of Connection Types | 1 | |
| Number of Levels | 1 | |
| Contact Pitch | 7.62 mm | |
| Rated Current (IEC) | 16 A | |
| Rated Voltage (IEC, III/3) | 500 V | |
| Rated Voltage (IEC, III/2) | 630 V | |
| Rated Voltage (IEC, II/2) | 1000 V | |
| Rated Impulse Withstand Voltage | 6 kV | |
| Rated Voltage (UL, Use Group B) | 300 V | |
| Rated Current (UL, Use Group B) | 20 A | |
| Rated Voltage (UL, Use Group D) | 300 V | |
| Rated Current (UL, Use Group D) | 10 A | |
| Rated Voltage (CSA, Use Group B) | 300 V | |
| Rated Current (CSA, Use Group B) | 15 A | |
| Rated Voltage (CSA, Use Group D) | 300 V | |
| Rated Current (CSA, Use Group D) | 10 A | |
| Connection Technology | Push-in CAGE CLAMP® | |
| Termination Method | Screwless spring-pressure connection | |
| Actuation Method | Operating tool | |
| Solid Conductor Cross-Section | 0.2–2.5 mm² | |
| Fine-Stranded Conductor Cross-Section | 0.2–2.5 mm² | |
| Fine-Stranded Conductor with Insulated Ferrule | 0.25–1.5 mm² | |
| Fine-Stranded Conductor with Uninsulated Ferrule | 0.25–2.5 mm² | |
| Conductor Size | 24–12 AWG | |
| Conductor Stripping Length | 9–10 mm | |
| Conductor Entry Direction Relative to Mating Direction | 0° | |
| Housing Configuration | Integrated end plate | |
| Mismating Protection | No | |
| Width | 81.08 mm | |
| Height | 20.8 mm | |
| Depth | 26.45 mm | |
| Weight | Approximately 30.464 g | |
| Contact Material | Copper alloy | |
| Contact Plating | Tin | |
| Clamping Spring Material | Chrome-nickel spring steel | |
| Flammability Classification | UL 94 V-0 | |
| Temperature Limit Range | −60 to +85 °C | |
| Country of Origin | Poland | |
| GTIN / EAN | 4044918565745 |
The WAGO 231-2711/026-000 is an eleven-pole, two-conductor female pluggable connector used for detachable electrical connections in industrial automation, machinery and control-panel wiring.
It has eleven poles and twenty-two conductor connection points. Each pole provides two conductor entries, giving eleven independent electrical potentials.
The connector features a 7.62 mm contact pitch, equivalent to 0.3 inches. It must be used with a compatible eleven-pole WAGO mating component.
The connector has a 16 A IEC rated current. Under UL 1059, the rated current is 20 A for Use Group B and 10 A for Use Group D, subject to the specified approval conditions.
The connector is rated at 500 V under IEC category III/3, 630 V under category III/2 and 1000 V under category II/2. The applicable voltage depends on the installation's insulation coordination requirements.
The connector accepts 0.2–2.5 mm² solid and fine-stranded conductors. Fine-stranded conductors with insulated ferrules are specified from 0.25–1.5 mm², while those with uninsulated ferrules are specified from 0.25–2.5 mm².
Yes. It uses Push-in CAGE CLAMP® spring-pressure terminals, allowing suitable conductors to be terminated without screw tightening. An operating tool is used for conductor actuation where required.
The connector has an orange polyamide 66 housing, providing insulation and a recognisable appearance within compatible electrical assemblies.
Yes. The 231-2711/026-000 features an integrated end plate, providing a complete connector housing arrangement.
Both are eleven-pole, two-conductor female connectors with a 7.62 mm contact pitch. The 231-2711/026-000 has an integrated end plate, whereas the 231-2711/037-000 is a variant with a locking latch. The correct version should be selected according to the mating and retention requirements.
WAGO MCS MIDI Classic connectors provide dependable pluggable electrical interfaces for industrial automation, machinery and electronic equipment. The WAGO 231-2711/026-000 combines eleven electrical poles, twenty-two Push-in CAGE CLAMP® conductor connections, a 7.62 mm contact pitch and an integrated end plate to support efficient wiring, modular installation and reliable electrical connectivity.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.