Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.85
The WAGO 231-240/001-000 is a 10-pole straight male PCB header from the WAGO MCS MIDI Classic 231 Series. Designed for industrial electronics, automation equipment and control circuit boards, this connector combines a 7.5 mm contact pitch, through-hole solder termination and a shrouded insulating housing to provide a reliable interface between printed circuit boards and compatible pluggable connectors.
Featuring ten male contacts arranged in a single row, the WAGO 231-240/001-000 uses 1.0 × 1.0 mm square solder pins for through-hole technology (THT) mounting. Its straight pin configuration allows a compatible female connector to mate perpendicular to the PCB, making it suitable for modular electrical and electronic equipment.
With a 12 A IEC rated current, IEC voltage ratings of up to 1000 V under specified conditions and an operating temperature range of -60 to +100 °C, this header is designed for industrial connection applications. Its tin-plated electrolytic copper contacts, grey polyamide housing and integrated coding fingers support practical, maintenance-friendly connector assemblies.
The WAGO MCS MIDI Classic 231 Series provides modular electrical connection solutions for industrial automation, control electronics and electrical equipment. Its pluggable connector architecture enables printed circuit boards to interface with detachable cable assemblies through compatible male and female connector components.
The WAGO 231-240/001-000 uses through-hole technology (THT), with ten straight solder pins designed for installation into appropriately prepared PCB holes. Each pin has a square cross-section of 1.0 × 1.0 mm and a solder pin length of 5 mm.
Unlike female cable connectors that use spring-pressure conductor termination, this male PCB header is soldered directly to the circuit board. Compatible female connectors can provide the detachable wiring interface, allowing equipment manufacturers to assemble and service electronic modules without permanently attaching external cables to the PCB.
The connector features a 7.5 mm contact pitch, providing ten electrical connection positions within an overall header length of approximately 75.7 mm. Its straight solder pins establish a 90° mating direction relative to the PCB, making it suitable for vertical connector engagement on appropriately designed circuit boards.
The shrouded grey housing incorporates coding fingers to support configured mating arrangements. Correct mating connector selection remains essential, as compatibility depends on the complete connector configuration and not solely on the number of poles or contact pitch.
Electrical ratings must be evaluated according to the applicable installation category. Under IEC conditions, the connector has a 12 A rated current and voltage ratings of 500 V, 630 V or 1000 V, depending on overvoltage category and pollution degree. Applicable UL ratings and the electrical limitations of the complete mating assembly must also be observed.
WAGO MCS connectors without breaking capacity must not be connected or disconnected while energised or under load. Circuit design should ensure that accessible male contacts are not live when the mating connector is removed.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 7.5 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 10 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-240/001-000 | |
| Series | 231 | |
| Product family | MCS MIDI Classic | |
| Product category | PCB headers and pluggable connectors | |
| Product type | THT male PCB header | |
| Connector gender | Male | |
| Number of contact positions | 10 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Contact pitch | 7.5 mm | |
| Termination technology | Through-hole soldering (THT) | |
| Solder pin orientation | Straight | |
| Solder pin cross-section | 1.0 × 1.0 mm | |
| Solder pin length | 5 mm | |
| PCB mounting type | Through-hole | |
| Mating direction relative to PCB | 90° | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1000 V | |
| Rated impulse voltage (IEC) | 6 kV | |
| Rated current (UL) | 10 A | |
| Rated voltage (UL) | 600 V | |
| Overall length | 75.7 mm | |
| Height above PCB | 12 mm | |
| Connector housing | Shrouded | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Housing material | Polyamide (PA66) | |
| Flammability classification | UL94 V-0 | |
| Operating temperature range | -60 to +100 °C | |
| Relevant standards | IEC/EN 61984, UL 1059 and UL 1977, subject to applicable approval conditions | |
| Country of origin | Poland |
The WAGO 231-240/001-000 is a ten-pole male PCB header designed for through-hole soldering onto printed circuit boards. It provides a detachable electrical interface when paired with a compatible female pluggable connector.
The connector has 10 poles, providing ten separate electrical contact positions arranged in a single row.
It is a male PCB header with straight solder pins. It is designed to mate with a compatible female connector from the WAGO MCS MIDI Classic connection system.
The connector features a 7.5 mm contact pitch, meaning adjacent contact positions are spaced 7.5 mm apart.
The connector has an IEC rated current of 12 A and a UL rated current of 10 A. The permissible current of the complete connector assembly also depends on the mating component and installation conditions.
The IEC rated voltage is 500 V for overvoltage category III, pollution degree 3; 630 V for category III, pollution degree 2; and 1000 V for category II, pollution degree 2. The connector also has a 600 V UL voltage rating.
The connector is mounted directly onto a printed circuit board using through-hole soldering. Its straight pins are inserted into suitable PCB holes and soldered to the circuit board.
Each solder pin has a 1.0 × 1.0 mm square cross-section and a length of 5 mm. The PCB footprint and hole dimensions should follow the WAGO manufacturer drawing.
The connector has an overall length of approximately 75.7 mm, calculated using WAGO's dimensional formula for this straight male header configuration.
No. This product is a THT male PCB header that uses solder pins for circuit board termination. Compatible female cable connectors may use WAGO CAGE CLAMP® spring-pressure technology for conductor connections.
Both are straight THT male PCB headers from the WAGO MCS MIDI Classic 231 Series, with a 7.5 mm contact pitch. The 231-239/001-000 has nine poles, while the 231-240/001-000 has ten poles.
No. The connector is not intended for load-breaking operation. The electrical circuit must be safely isolated before mating or unmating, and accessible male contacts must not remain live when disconnected.
WAGO MCS MIDI Classic connectors provide modular electrical connection solutions for industrial automation engineers, PCB designers, control panel builders and electronic equipment manufacturers. The WAGO 231-240/001-000 combines ten male contacts, a 7.5 mm pitch, a 12 A IEC current rating and straight through-hole solder pins to support dependable PCB interconnections, efficient equipment assembly and maintenance-friendly industrial electronic systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.