Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.65
The WAGO 231-239/001-000 is a professional 9-pole through-hole technology (THT) male PCB header from the WAGO MCS MIDI Classic 231 Series. Designed for industrial electronics, automation equipment and control circuit boards, this connector features a 7.5 mm contact pitch, straight solder pins and a shrouded insulating housing for reliable, detachable electrical connections.
Featuring nine male contacts arranged in a single row, the WAGO 231-239/001-000 provides a convenient interface between a printed circuit board and a compatible female pluggable connector. Its 1.0 × 1.0 mm square solder pins are designed for through-hole PCB installation, providing a soldered electrical and mechanical connection to the circuit board.
The connector has an IEC rated current of 12 A and voltage ratings of up to 1000 V, depending on the applicable overvoltage category and pollution degree. Its tin-plated electrolytic copper contacts, grey polyamide housing and operating temperature range of -60 to +100 °C make it suitable for a variety of industrial electronic applications.
With its straight PCB mounting configuration, integrated coding fingers and compatibility with appropriately selected WAGO MCS MIDI Classic female connectors, the WAGO 231-239/001-000 is an effective choice for modular equipment assembly, PCB interconnections and maintenance-friendly industrial electronics.
The WAGO MCS MIDI Classic 231 Series provides modular electrical connection solutions for industrial electronics, automation equipment and control systems. Its pluggable connector architecture allows printed circuit boards to interface with detachable wiring assemblies through compatible male and female connector components.
The WAGO 231-239/001-000 uses through-hole technology (THT), with nine straight solder pins designed for insertion into appropriately prepared PCB holes. Each pin has a square cross-section of 1.0 × 1.0 mm and a soldering length of 5 mm.
Unlike female cable connectors that use spring-clamp conductor termination, this male PCB header is soldered directly to the circuit board. Compatible female connector components provide the detachable conductor interface, enabling wiring assemblies to be connected and disconnected for installation or maintenance.
The connector features a 7.5 mm contact pitch, providing nine electrical connection positions within a housing approximately 68.2 mm wide. Its straight solder pins establish a 90° mating direction relative to the PCB, making it suitable for vertical connector engagement on appropriately designed circuit boards.
The shrouded grey housing incorporates coding fingers to support configured mating arrangements. However, the connector is not classified as having mismating protection, so compatible connector selection and correct assembly remain essential.
Electrical ratings must be evaluated according to the applicable installation category. Under IEC conditions, the connector supports 12 A and voltage ratings of 500 V, 630 V or 1000 V, depending on overvoltage category and pollution degree. Applicable UL and CSA ratings differ and must be observed where required.
WAGO MCS connectors without breaking capacity must not be connected or disconnected while energised or under load. Circuit design should also ensure that accessible male contacts are not live when the mating connector is removed.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 7.5 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 9 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Manufacturer part number | 231-239/001-000 | |
| Product series | 231 | |
| Product family | MCS MIDI Classic | |
| Product type | THT male PCB header | |
| Connector gender | Male | |
| Number of potentials | 9 | |
| Number of levels | 1 | |
| Number of contact rows | 1 | |
| Contact pitch | 7.5 mm | |
| Termination technology | Through-hole soldering (THT) | |
| Solder pin orientation | Straight | |
| Solder pin dimensions | 1.0 × 1.0 mm | |
| Solder pin length | 5 mm | |
| Recommended PCB drilled-hole diameter | 1.4 mm (+0.1 mm) | |
| Connector connection type | For printed circuit boards | |
| Mating direction relative to PCB | 90° | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1000 V | |
| Rated impulse voltage | 6 kV | |
| Rated voltage (UL 1059, Use Group B) | 300 V | |
| Rated current (UL 1059, Use Group B) | 10 A | |
| Rated voltage (UL 1059, Use Group D) | 300 V | |
| Rated current (UL 1059, Use Group D) | 10 A | |
| Rated voltage (CSA, Use Group B) | 300 V | |
| Rated current (CSA, Use Group B) | 10 A | |
| Rated voltage (CSA, Use Group D) | 300 V | |
| Rated current (CSA, Use Group D) | 10 A | |
| Width | 68.2 mm | |
| Height | 17 mm | |
| Height above PCB surface | 12 mm | |
| Depth | 8.4 mm | |
| Connector housing | Shrouded | |
| Mismating protection | No | |
| Contact material | Electrolytic copper | |
| Contact plating | Tin | |
| Housing material | Polyamide (PA66) | |
| Flammability classification | UL94 V-0 | |
| Operating temperature range | -60 to +100 °C | |
| GTIN/EAN | 4044918864848 | |
| Country of origin | Poland |
The WAGO 231-239/001-000 is a nine-pole male PCB header designed for through-hole soldering onto printed circuit boards. It provides a detachable electrical interface when paired with a compatible female connector.
The connector has 9 poles, providing nine separate electrical contact positions arranged in a single row.
It is a male PCB header with straight solder pins. It is designed to mate with a compatible female connector from the relevant WAGO MCS MIDI Classic connection system.
The connector features a 7.5 mm contact pitch, meaning adjacent contact positions are spaced 7.5 mm apart.
The connector has an IEC rated current of 12 A. Its UL 1059 and CSA ratings are 10 A for the specified use groups. The permissible current of the complete assembly also depends on the mating connector and installation conditions.
The IEC rated voltage is 500 V for overvoltage category III, pollution degree 3; 630 V for category III, pollution degree 2; and 1000 V for category II, pollution degree 2. UL 1059 and CSA ratings are 300 V for the specified use groups.
The connector is mounted directly onto a printed circuit board using through-hole soldering. Its straight pins are inserted into suitable PCB holes and soldered to the circuit board.
Each solder pin has a 1.0 × 1.0 mm square cross-section and a length of 5 mm. The specified PCB drilled-hole diameter is 1.4 mm with a positive tolerance of 0.1 mm.
The connector measures approximately 68.2 mm wide, 17 mm high and 8.4 mm deep. Its height above the PCB surface is 12 mm.
No. This product is a THT male PCB header that uses solder pins for circuit board termination. Compatible female cable connectors may use WAGO CAGE CLAMP® spring-pressure technology for conductor connections.
Yes. The connector incorporates coding fingers to support appropriately configured mating arrangements. However, the product is not classified as having mismating protection.
No. The connector is not intended for load-breaking operation. The electrical circuit must be safely isolated before mating or unmating, and accessible male contacts must not remain live when disconnected.
WAGO MCS MIDI Classic connectors provide modular electrical connection solutions for industrial automation engineers, PCB designers, control panel builders and electronic equipment manufacturers. The WAGO 231-239/001-000 combines nine male contacts, a 7.5 mm pitch, a 12 A IEC current rating and straight through-hole solder pins to support dependable PCB interconnections, efficient equipment assembly and maintenance-friendly industrial electronic systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.