Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£0.6545
The WAGO 231-233/001-000 is a 3-pole through-hole PCB male header from the WAGO MCS MIDI Classic Series 231. Designed for reliable pluggable electrical connections, this straight male header features a 7.5 mm contact pitch, 1.0 × 1.0 mm square solder pins and a grey insulating housing.
With a 12 A IEC rated current and voltage ratings of 500 V, 630 V or 1000 V, depending on the applicable overvoltage category and pollution degree, the connector provides a practical interface between printed circuit boards and compatible detachable wiring connectors. Its three contact positions are arranged in a single row for straightforward PCB integration.
The WAGO 231-233/001-000 uses through-hole technology (THT) for soldered PCB mounting and incorporates coding fingers to support suitable mating arrangements. Its tin-plated contacts and polyamide insulating housing make it suitable for industrial automation equipment, electronic control boards and OEM machinery requiring dependable, serviceable electrical connections.
The WAGO 231-233/001-000 provides a permanent soldered interface on a printed circuit board while allowing a compatible female connector to be plugged into the equipment. This arrangement supports modular assembly, pre-wired harness installation and convenient servicing of industrial electronic modules.
Its straight THT mounting arrangement, three-pole configuration and 7.5 mm spacing make it suitable for a range of industrial control applications. The connector is designed without breaking capacity in accordance with IEC/EN 61984 and must not be connected or disconnected while live or under load. Circuit designers should also ensure that accessible header pins are not energised when the mating connector is removed.
Tick the specs you need, then view products that match.
| Current | 12 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 100 °C | |
| Rated current In | 12 A | |
| Material insulation body | Thermoplastic | |
| Housing colour | Grey | |
| Modular spacing contacts | 7.5 mm | |
| Angle PCB/contact | 90° (upwards vertical) | |
| Contact type | Pin | |
| Type of electric connection | Soldering connection | |
| Type of fastening | Solder | |
| Type of connection | Flexible PCB-connector | |
| Length pin | 5 mm | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 3 | |
| Connector model | Free connector | |
| Suitable for PCB thickness | 1.5 mm | |
| Type of banding | None | |
| Rated voltage | 630 V | |
| Material of contact surface | Tin | |
| Pollution degree | 2 | |
| Overvoltage category | III | |
| Type of PCB fastening | Connecting contact | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic / Series 231 | |
| Model | 231-233/001-000 | |
| Product type | THT PCB male header | |
| Connector gender | Male | |
| Number of potentials | 3 | |
| Number of contact rows | 1 | |
| Number of levels | 1 | |
| Contact pitch | 7.5 mm | |
| PCB mounting technology | Through-hole technology (THT) | |
| Termination method | Solder connection | |
| Solder pin dimensions | 1.0 × 1.0 mm | |
| Solder pin length | 5 mm | |
| Connector orientation | Straight / vertical | |
| Rated current (IEC) | 12 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1000 V | |
| Rated impulse voltage (IEC) | 6 kV | |
| Rated current (UL, use groups B/D) | 10 A | |
| Rated voltage (UL, use groups B/D) | 300 V | |
| Housing material | Polyamide 66 (PA 66) | |
| Contact material | Copper | |
| Contact plating | Tin | |
| Flammability classification | UL 94 V-0 | |
| Overall width | 23 mm | |
| Calculated length | 23.2 mm, using WAGO's dimensional formula | |
| Housing height above PCB | 12 mm | |
| Connector standard | IEC/EN 61984 | |
| UL connection standard | UL 1059 | |
| GTIN / EAN | 4044918864510 |
The WAGO 231-233/001-000 is a 3-pole through-hole PCB male header used to provide a pluggable connection between a printed circuit board and a compatible female connector in industrial electronic and automation equipment.
The connector has a 7.5 mm contact pitch and 1.0 × 1.0 mm square solder pins. It is designed for through-hole PCB mounting using soldered connections.
The connector has an IEC rated current of 12 A and IEC rated voltages of 500 V, 630 V and 1000 V, depending on the applicable overvoltage category and pollution degree. Its IEC rated impulse voltage is 6 kV.
The connector has an overall width of 23 mm, consistent with the manufacturer's dimensional formula of L = (number of poles − 1) × pin spacing + 8.2 mm, which gives 23.2 mm for three poles at 7.5 mm spacing. The housing height above the PCB is 12 mm.
No. The WAGO MCS connector system includes connectors without breaking capacity under IEC/EN 61984. The connection must not be mated or unmated while live or under load, and the circuit must be designed to prevent accessible header pins from remaining energised when disconnected.
WAGO MCS MIDI Classic connectors provide dependable modular electrical connectivity for industrial electronics, automation systems and OEM machinery. The WAGO 231-233/001-000 combines a compact three-pole design, straight through-hole mounting and a 7.5 mm contact pitch to support reliable PCB connections and efficient assembly of professional electronic equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.