Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£8.90
The WAGO 231-2312/026-000 is a reliable 12-pole, 2-conductor female pluggable connector designed for secure electrical connections in industrial automation, control panels and electronic equipment. As part of the WAGO MCS MIDI Classic series, it features Push-in CAGE CLAMP® spring connection technology, enabling efficient, screwless conductor termination and dependable electrical contact.
Featuring a 5.08 mm pin spacing and support for copper conductors from 0.2–2.5 mm², the WAGO 231-2312/026-000 provides a versatile connection interface between field wiring and compatible pluggable male connectors. Its twelve-pole arrangement incorporates two conductor connection points per pole, providing 24 conductor connection points across 12 electrical potentials.
With an IEC rated current of 16 A, an IEC rated voltage of up to 630 V under the applicable insulation coordination conditions, and a durable orange insulating housing, this connector is suitable for industrial power, signal and control wiring. Its integrated end plate and detachable connection interface support efficient equipment assembly, convenient maintenance and reliable integration into modular electrical systems.
The WAGO Push-in CAGE CLAMP® connection system uses spring pressure to establish secure electrical contact with correctly prepared copper conductors. Solid conductors and suitably ferruled fine-stranded conductors can be inserted directly, while an appropriate operating tool supports conductor release and connection of other permitted conductor types. This screwless connection method simplifies wiring and eliminates conventional terminal screw tightening requirements.
The WAGO 231-2312/026-000 combines this connection technology with a detachable female connector interface, allowing complete wiring assemblies to be connected and disconnected from compatible equipment without individually removing terminated conductors. Its two-conductor-per-pole configuration supports loop-through power and data bus connections, maintaining electrical continuity between the two conductor connections of each pole when the connector is unmated.
The connector's tin-plated copper alloy contacts, flame-retardant polyamide housing and integrated coding features support dependable integration into industrial electrical equipment. Correct mating connector selection, conductor preparation and compliance with applicable voltage, current and environmental ratings are essential for safe operation. The connector is not intended for making or breaking live electrical loads.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.2 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.2 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 12 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.2 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic / 231 Series | |
| Model | 231-2312/026-000 | |
| Product type | 2-conductor female pluggable connector | |
| Connector gender | Female / socket | |
| Connection technology | Push-in CAGE CLAMP® | |
| Conductors per pole | 2 | |
| Total conductor connection points | 24 | |
| Total number of potentials | 12 | |
| Number of levels | 1 | |
| Pin spacing | 5.08 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III / 3) | 320 V | |
| Rated voltage (IEC, III / 2) | 320 V | |
| Rated voltage (IEC, II / 2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated current (UL) | 20 A | |
| Rated voltage (UL) | 600 V | |
| Solid conductor cross-section | 0.2–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.2–2.5 mm² | |
| Conductor size | 24–12 AWG | |
| Conductor stripping length | 9–10 mm | |
| Conductor entry direction | 180° relative to mating direction | |
| Actuation type | Operating tool | |
| Connector configuration | With integrated end plate | |
| Connector coding | Integrated coding fingers | |
| Mounting arrangement | Free-hanging / in-line pluggable connector | |
| Nominal connector length (WAGO dimensional formula) | 60.8 mm | |
| Insulation height | 20.8 mm | |
| Insulating material | Polyamide 66 (PA66) | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Flammability classification | UL94 V-0 | |
| Temperature limit range | −60 to +85 °C | |
| Manufacturer packaging unit | 25 pieces | |
| Product group | Multi Connection System (MCS) |
The WAGO 231-2312/026-000 is a 12-pole female pluggable connector used for industrial power, signal and control wiring. It provides a detachable connection to compatible male connectors in automation equipment, control panels and electronic assemblies.
The connector provides two conductor connection points per pole, allowing a total of 24 conductor terminations across 12 electrical potentials.
The WAGO 231-2312/026-000 supports solid and fine-stranded copper conductors from 0.2 to 2.5 mm², corresponding to 24–12 AWG. Permitted ferrule sizes depend on conductor construction and ferrule dimensions.
The connector has an IEC rated current of 16 A and a UL rated current of 20 A, subject to the applicable approval conditions and ratings of the complete connector assembly.
The connector features a 5.08 mm pin spacing, equivalent to 0.2 inches, and is intended for use with compatible WAGO MCS MIDI Classic mating components.
No. The connector uses Push-in CAGE CLAMP® spring connection technology, providing screwless conductor termination. An operating tool is used when required for conductor insertion and release.
Yes. The WAGO 231-2312/026-000 features an integrated end plate, providing an enclosed connector configuration without requiring a separate end plate for this variant.
Yes. Its two-conductor-per-pole arrangement supports loop-through power and data bus connections. Electrical continuity between the two conductor entries of each pole is maintained when the connector is unmated.
The recommended conductor stripping length is 9–10 mm to ensure correct insertion and contact within the Push-in CAGE CLAMP® connection.
No. The WAGO MCS connector system is not designed for load-breaking operation. Electrical power should be isolated before connecting or disconnecting the assembly, and exposed mating contacts must be protected against hazardous voltages.
WAGO MCS MIDI Classic pluggable connectors provide dependable electrical interconnection solutions for industrial automation, machine building and control equipment, combining Push-in CAGE CLAMP® spring connection technology with flexible loop-through wiring, reliable conductor retention and convenient detachable connector interfaces.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.