Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£8.41
The WAGO 231-2311/037-000 is a high-performance 11-pole, 2-conductor female pluggable connector with lateral locking levers, designed for reliable electrical connections in industrial automation, control panels and electronic equipment. As part of the WAGO MCS MIDI Classic series, it features Push-in CAGE CLAMP® spring connection technology, enabling efficient conductor termination without conventional screw connections.
Featuring a 5.08 mm pin spacing and support for copper conductors from 0.2–2.5 mm², the WAGO 231-2311/037-000 provides a practical connection interface for industrial power, control and signal wiring. Its eleven-pole configuration incorporates two conductor connection points per pole, providing 22 conductor connection points across 11 electrical potentials. This arrangement supports loop-through wiring and distribution of power or data buses.
With an IEC rated current of 16 A, an IEC rated voltage of up to 630 V under the applicable insulation coordination conditions, and a durable orange polyamide housing, this connector is suitable for demanding industrial installations. Its lateral locking levers provide additional mechanical retention when connected to compatible male headers, helping prevent unintended disconnection during equipment operation and maintenance.
The WAGO Push-in CAGE CLAMP® connection system uses spring pressure to maintain dependable electrical contact with correctly prepared conductors. Solid conductors and suitably ferruled fine-stranded conductors can be inserted directly, while an operating tool supports termination and release of other permitted conductor types. This screwless design eliminates conventional tightening torque requirements and helps simplify industrial wiring procedures.
The WAGO 231-2311/037-000 combines this spring connection technology with lateral locking levers that help secure the female connector to compatible mating components. Its two-conductor-per-pole arrangement enables loop-through wiring for power and data buses, allowing electrical continuity between the two conductor connections of each pole to remain intact even when the connector is unplugged.
The connector's tin-plated copper alloy contacts, flame-retardant PA66 housing and coding features support reliable integration into industrial electronic assemblies. As part of the WAGO MCS system, the connector is not intended to be connected or disconnected while live or under load. The circuit should also be designed to prevent accessible male header pins from remaining live when unmated.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.2 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.2 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 11 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.2 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic / 231 Series | |
| Model | 231-2311/037-000 | |
| Product type | 2-conductor female pluggable connector | |
| Connector gender | Female / socket | |
| Connection technology | Push-in CAGE CLAMP® | |
| Conductors per pole | 2 | |
| Total conductor connection points | 22 | |
| Total number of potentials | 11 | |
| Number of levels | 1 | |
| Pin spacing | 5.08 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III / 3) | 320 V | |
| Rated voltage (IEC, III / 2) | 320 V | |
| Rated voltage (IEC, II / 2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated current (UL) | 20 A | |
| Rated voltage (UL) | 600 V | |
| Solid conductor cross-section | 0.2–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.2–2.5 mm² | |
| Conductor size | 24–12 AWG | |
| Conductor stripping length | 9–10 mm | |
| Conductor entry direction | 180° relative to mating direction | |
| Actuation type | Operating tool | |
| Locking mechanism | Lateral locking levers | |
| Connector coding | Integrated coding fingers | |
| Mounting arrangement | Free-hanging / in-line pluggable connector | |
| Nominal connector length (series formula) | 55.72 mm | |
| Insulation height | 20.8 mm | |
| Insulating material | Polyamide 66 (PA66) | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Flammability classification | UL94 V-0 | |
| Temperature limit range | −60 to +85 °C | |
| Product group | Multi Connection System (MCS) | |
| Connector standard | DIN EN 61984 |
The WAGO 231-2311/037-000 is an 11-pole female pluggable connector designed for industrial power, signal and control wiring. It provides a detachable connection to compatible male connectors in automation equipment, control panels and electronic assemblies.
The connector provides two conductor connection points per pole, allowing a total of 22 conductor terminations across 11 electrical potentials.
The WAGO 231-2311/037-000 supports solid and fine-stranded copper conductors from 0.2 to 2.5 mm², corresponding to 24–12 AWG. Permitted ferrule sizes depend on the conductor and ferrule construction.
The connector has an IEC rated current of 16 A and a UL rated current of 20 A, subject to the relevant approval conditions and the ratings of the complete connector assembly.
The connector features a 5.08 mm pin spacing, equivalent to 0.2 inches, and is intended for use with compatible WAGO MCS MIDI Classic mating components.
The lateral locking levers mechanically secure the female connector to a compatible male connector, helping prevent unintended separation during equipment operation or handling.
No. The connector uses Push-in CAGE CLAMP® spring connection technology, providing screwless conductor termination. An operating tool can be used for conductor release and connection of supported conductor types that cannot be inserted directly.
Yes. Its two-conductor-per-pole arrangement supports loop-through power and data bus connections. The connection between the two conductor entries of each pole remains electrically continuous when the connector is unmated.
The recommended conductor stripping length is 9–10 mm to ensure correct insertion and contact within the Push-in CAGE CLAMP® connection.
No. The WAGO MCS connector system is designed without load-breaking capacity in accordance with DIN EN 61984. The connector must not be connected or disconnected while live or under load, and accessible mating pins must be protected against hazardous voltages when unmated.
WAGO MCS MIDI Classic pluggable connectors provide dependable electrical interconnection solutions for industrial automation, machine building and control equipment, combining Push-in CAGE CLAMP® spring connection technology with secure lateral locking mechanisms, flexible loop-through wiring and convenient detachable connector interfaces.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.