Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£6.19
The WAGO 231-2308/037-000 is an 8-pole, 2-conductor female pluggable connector from the WAGO 231 Series MCS MIDI Classic range. Combining Push-in CAGE CLAMP® technology, a 5.08 mm contact pitch and lateral locking levers, this orange connector provides a secure, detachable electrical interface for industrial automation, control panels and modular electronic equipment.
With two conductor entries per pole, the connector provides 16 conductor connection points across eight independent electrical potentials. This arrangement allows power supplies, control signals and data buses to be looped through the connector without separate distribution terminals. The two conductor entries belonging to each pole remain electrically connected even when the female connector is unplugged from its mating header.
The WAGO 231-2308/037-000 accepts solid and fine-stranded conductors from 0.2 to 2.5 mm² and has an IEC rated current of 16 A. Its screwless spring-pressure connection technology simplifies conductor termination, while the lateral locking levers provide additional mechanical security when used with a compatible mating header.
The /037-000 locking-lever configuration is particularly useful where positive connector retention is important. Compared with the WAGO 231-2308/026-000 variant, which features an integrated end plate, this model offers a different mechanical mating arrangement that must be matched to the intended equipment design.
Technical selection note: The listed IEC and UL ratings apply under their respective test and approval conditions. Always check the current manufacturer datasheet, mating header specifications, conductor preparation requirements and complete connector assembly ratings before installation.
The WAGO 231-2308/037-000 combines WAGO's established Push-in CAGE CLAMP® spring-pressure connection technology with a positive mechanical locking arrangement. The spring-pressure terminals provide dependable conductor contact without conventional screw tightening, while the lateral locking levers help secure the female connector to a compatible male header.
Suitable solid conductors and fine-stranded conductors fitted with appropriate ferrules can be inserted directly into the terminal connection. Other permitted conductor types can be installed using an operating tool to actuate the spring clamp. A conductor stripping length of 9–10 mm helps ensure correct insertion and reliable electrical contact.
Each of the eight poles provides two internally connected conductor entries. This enables an incoming supply or control signal to be continued to another device without installing a separate distribution terminal. The internal connection between the two entries remains intact when the female connector is unplugged, supporting loop-through continuity in correctly designed power and data bus applications.
The lateral locking levers distinguish this model from the WAGO 231-2308/026-000, which has an integrated end plate instead. The locking-lever arrangement can be valuable in equipment where mechanical retention is required, but it is essential to select a compatible male header with the correct mating and locking features.
The 5.08 mm contact pitch also distinguishes this orange connector from 5 mm-pitch variants in the wider WAGO 231 range. Although these pitch dimensions are close, they should not be treated as interchangeable. Always verify the exact mating connector part number before assembly.
The WAGO MCS MIDI Classic system includes connectors without breaking capacity in accordance with DIN EN 61984. The connector must not be connected or disconnected while live or under load, and the equipment design must ensure that accessible unmated male contacts do not carry hazardous voltages.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.2 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.2 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 8 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.2 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | 231 Series / MCS MIDI Classic | |
| Manufacturer part number | 231-2308/037-000 | |
| Product type | 2-conductor female pluggable connector | |
| Number of electrical potentials | 8 | |
| Conductors per potential | 2 | |
| Total conductor connection points | 16 | |
| Number of levels | 1 | |
| Contact gender | Female / socket | |
| Connection technology | Push-in CAGE CLAMP® | |
| Termination method | Screwless spring-pressure / push-in | |
| Actuation | Operating tool for spring clamp operation | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated current (UL) | 20 A | |
| Rated voltage (UL) | 600 V | |
| Contact pitch | 5.08 mm | |
| Solid conductor cross-section | 0.2–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.2–2.5 mm² | |
| Conductor size | 24–12 AWG | |
| Conductor stripping length | 9–10 mm | |
| Conductor entry direction | 180° / in-line | |
| Mounting arrangement | Free-hanging / cable-mounted | |
| Locking mechanism | Lateral locking levers | |
| Coding | Integrated coding fingers | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Operating temperature range | −60 to +85 °C | |
| Insulation height | 20.8 mm | |
| Nominal housing length | 40.48 mm, calculated using WAGO's dimensional formula | |
| Compliance | RoHS compliant | |
| Country of origin | Poland |
The WAGO 231-2308/037-000 is an 8-pole, 2-conductor female pluggable connector used for detachable electrical connections in industrial automation, control equipment and modular electronic assemblies. Its two-conductor-per-pole design is particularly useful for power and signal loop-through wiring.
The connector has 8 poles and eight separate electrical potentials. Each pole accommodates two conductors, providing 16 conductor connection points in total.
The connector features a 5.08 mm contact pitch and is designed for use with compatible WAGO MCS MIDI Classic male connectors.
The connector has an IEC rated current of 16 A and a listed UL rated current of 20 A, subject to the relevant approval and installation conditions.
The WAGO 231-2308/037-000 has an IEC rated voltage of 630 V under overvoltage category II, pollution degree 2 conditions. A 600 V UL rating is also listed, subject to the applicable approval conditions.
The connector supports solid and fine-stranded conductors from 0.2 to 2.5 mm², equivalent to 24–12 AWG. The permitted conductor size may vary according to conductor construction and ferrule type.
Push-in CAGE CLAMP® is WAGO's spring-pressure conductor connection technology. It allows suitable solid and ferruled conductors to be inserted directly while providing dependable electrical contact without conventional screw tightening.
The 2-conductor designation means that each of the eight poles has two conductor entries. The connector therefore provides 16 conductor connection points across eight independent electrical potentials.
Yes. The two conductor entries belonging to each pole remain electrically connected inside the female connector when it is unmated, helping maintain continuity in appropriately designed power and data bus circuits.
Both are eight-pole, two-conductor female connectors with Push-in CAGE CLAMP® technology and a 5.08 mm pitch. The 231-2308/037-000 features lateral locking levers, whereas the 231-2308/026-000 features an integrated end plate.
The specified conductor stripping length is 9–10 mm.
No. The WAGO MCS MIDI Classic system includes connectors without breaking capacity. The connector must not be connected or disconnected while live or under load, and the electrical circuit should be safely isolated before mating or separation.
WAGO MCS MIDI Classic connectors provide dependable modular electrical interconnections for industrial equipment. Combining Push-in CAGE CLAMP® technology, a 5.08 mm contact pitch, two-conductor loop-through wiring and lateral locking levers, the WAGO 231-2308/037-000 offers a practical, serviceable solution for secure eight-pole industrial electrical connections.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.