Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£5.92
The WAGO 231-2308/026-000 is an 8-pole, 2-conductor female pluggable connector from the WAGO 231 Series MCS MIDI Classic range. Featuring Push-in CAGE CLAMP® technology, a 5.08 mm contact pitch and an orange insulating housing with an integrated end plate, this connector provides a dependable detachable wiring interface for industrial automation, electrical control systems and modular electronic equipment.
With two conductor entries per pole, the WAGO 231-2308/026-000 provides 16 conductor connection points across eight independent electrical potentials. This arrangement is particularly useful for looping through power supplies, control signals and data buses without requiring separate distribution terminals. The connection between the two conductor entries of each pole is maintained even when the female connector is unplugged from its mating header.
The connector supports conductor cross-sections from 0.2 to 2.5 mm², with an IEC rated current of 16 A and a rated voltage of 630 V under specified IEC insulation coordination conditions. Its screwless spring-pressure connection technology simplifies wiring, while the detachable mating interface supports convenient assembly, maintenance and replacement of industrial electronic modules.
Technical selection note: Electrical ratings vary according to the applicable approval standard and installation conditions. The complete connector assembly must be assessed using the ratings of both mating components, conductor specifications and the operating environment.
The WAGO 231-2308/026-000 uses WAGO's established Push-in CAGE CLAMP® spring-pressure connection technology to provide dependable electrical termination without conventional screw terminals. Spring-pressure contacts maintain consistent conductor clamping force, supporting reliable electrical performance in industrial control equipment and modular electronic systems.
Suitable solid conductors and fine-stranded conductors fitted with appropriate ferrules can be inserted directly into the terminal connection. Other permitted conductor types can be installed using an operating tool to open the spring clamp. The specified 9–10 mm stripping length supports correct conductor insertion and electrical contact.
Each of the eight poles includes two internally connected conductor entries, enabling incoming power or control signals to be continued to another device without additional distribution terminals. The internal connection between the two entries remains intact when the female connector is unplugged, making this configuration useful for power and data bus loop-through applications.
The connector's integrated end plate, retention features and coding fingers support mechanical integration with compatible WAGO MCS MIDI Classic male headers. The mating connector must have the correct 5.08 mm pitch, eight-pole contact arrangement, mechanical configuration and appropriate electrical ratings.
The WAGO MCS MIDI Classic connector system includes connectors without breaking capacity in accordance with DIN EN 61984. The connector must not be connected or disconnected while live or under load, and the equipment design should ensure that accessible unmated male contacts cannot carry hazardous voltages.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.2 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.2 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 8 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.2 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | 231 Series / MCS MIDI Classic | |
| Manufacturer part number | 231-2308/026-000 | |
| Product type | 2-conductor female pluggable connector | |
| Number of electrical potentials | 8 | |
| Conductors per potential | 2 | |
| Total conductor connection points | 16 | |
| Number of levels | 1 | |
| Contact gender | Female / socket | |
| Connection technology | Push-in CAGE CLAMP® | |
| Termination method | Screwless spring-pressure / push-in | |
| Actuation method | Operating tool | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated current (UL) | 20 A | |
| Rated voltage (UL) | 600 V | |
| Contact pitch | 5.08 mm | |
| Conductor cross-section | 0.2–2.5 mm² | |
| Conductor size | 24–12 AWG | |
| Conductor stripping length | 9–10 mm | |
| Conductor entry direction | 180° / in-line | |
| Mounting arrangement | Free-hanging / cable-mounted | |
| Housing configuration | Integrated end plate | |
| Connector retention | Retention latches | |
| Coding | Integrated coding fingers | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Insulation material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Temperature range | −60 to +85 °C | |
| Width | approximately 40.49 mm | |
| Insulation height | 20.8 mm | |
| Depth | approximately 26.45 mm | |
| Dimensions (W × H × D) | approximately 40.49 × 20.8 × 26.45 mm | |
| Compliance | RoHS compliant | |
| Country of origin | Poland | |
| GTIN / EAN | 4044918564557 |
The WAGO 231-2308/026-000 is an 8-pole female pluggable connector used for detachable electrical connections in industrial automation, control equipment and modular electronic assemblies. Its two-conductor-per-pole configuration is particularly useful for power and signal loop-through wiring.
The connector has 8 poles and eight separate electrical potentials. Each pole accommodates two conductors, providing 16 conductor connection points in total.
The connector features a 5.08 mm contact pitch and is designed for use with compatible WAGO MCS MIDI Classic male connectors.
The connector has an IEC rated current of 16 A and a listed UL rated current of 20 A, subject to the applicable approval and installation conditions.
The WAGO 231-2308/026-000 has an IEC rated voltage of 630 V under overvoltage category II, pollution degree 2 conditions. A 600 V UL rating is also listed, subject to the relevant approval conditions.
The connector supports conductor cross-sections from 0.2 to 2.5 mm², equivalent to 24–12 AWG. The permitted conductor size may vary according to conductor construction and ferrule type.
Push-in CAGE CLAMP® is WAGO's spring-pressure conductor connection technology. It enables suitable solid and ferruled conductors to be inserted directly while providing dependable electrical contact without conventional screw tightening.
The 2-conductor designation means that each of the eight poles has two conductor entries. The connector therefore provides 16 conductor connection points across eight independent electrical potentials.
Yes. The two conductor entries belonging to each pole remain electrically connected inside the female connector when it is unmated, helping maintain continuity in appropriately designed power and data bus circuits.
Both are eight-pole, two-conductor female connectors using Push-in CAGE CLAMP® technology. The 231-2308/026-000 has a 5.08 mm pitch and orange housing, whereas the 231-2108/026-000 has a 5 mm pitch and grey housing. The different pitches mean mating compatibility must be checked carefully.
The specified conductor stripping length is 9–10 mm.
No. The WAGO MCS MIDI Classic connector system includes connectors without breaking capacity. The connector must not be connected or disconnected while live or under load, and the electrical circuit should be safely isolated before mating or separation.
WAGO MCS MIDI Classic connectors provide dependable modular electrical interconnections for industrial equipment. Combining Push-in CAGE CLAMP® technology, a 5.08 mm contact pitch, two-conductor loop-through wiring and an integrated end plate, the WAGO 231-2308/026-000 offers a practical, serviceable solution for eight-pole industrial electrical connections.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.