Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.71
The WAGO 231-2305/026-000 is a versatile 5-pole, 2-conductor female pluggable connector designed for reliable electrical connections in industrial automation, control panels and electronic equipment. As part of the WAGO MCS MIDI Classic series, it incorporates Push-in CAGE CLAMP® spring connection technology, enabling efficient, screwless conductor termination and dependable electrical contact.
Featuring a 5.08 mm pin spacing and a conductor connection capacity of up to 2.5 mm², the WAGO 231-2305/026-000 provides a practical interface between field wiring and compatible pluggable male connectors. Its five-pole arrangement incorporates two conductor connection points per pole, providing ten conductor connection points across five electrical potentials.
The connector features a distinctive orange insulating housing and an integrated end plate, making it suitable for organised wiring and compact electrical assemblies. Its detachable connection interface supports convenient equipment installation, servicing and replacement, while the two-conductor-per-pole arrangement offers additional flexibility for power distribution, signal wiring and loop-through connections.
The WAGO Push-in CAGE CLAMP® connection system uses spring pressure to establish secure electrical contact with correctly prepared copper conductors. This screwless connection technology supports efficient wiring procedures while maintaining dependable conductor retention in industrial electrical installations.
The WAGO 231-2305/026-000 combines this connection system with a detachable female connector interface, allowing complete wiring assemblies to be connected and disconnected from compatible equipment without individually removing the terminated conductors. Its two-conductor-per-pole design is particularly useful for loop-through wiring, enabling two conductors to share an electrical potential where permitted by the circuit design.
The 5-pole configuration provides additional wiring capacity while retaining the compact 5.08 mm pitch of the MCS MIDI Classic connector family. Correct conductor preparation, compatible mating connector selection and adherence to the applicable electrical and environmental ratings are essential for safe, reliable operation.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.2 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.2 – 2.5 mm² | |
| Housing colour | Orange | |
| Modular spacing contacts | 5.08 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5.08 mm | |
| Number of poles | 5 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.2 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic / 231 Series | |
| Model | 231-2305/026-000 | |
| Product type | 2-conductor female pluggable connector | |
| Connector gender | Female / socket | |
| Connection technology | Push-in CAGE CLAMP® | |
| Conductors per pole | 2 | |
| Total conductor connection points | 10 | |
| Total number of potentials | 5 | |
| Pin spacing | 5.08 mm | |
| Maximum conductor cross-section | 2.5 mm² | |
| Conductor material | Copper | |
| Connection method | Spring-clamp conductor termination | |
| Connector interface | Pluggable female socket | |
| Integrated end plate | Yes | |
| Nominal connector length (series formula) | 25.24 mm | |
| Manufacturer packaging unit | 50 pieces | |
| Product group | Multi Connection System (MCS) | |
| Typical installation | Industrial electrical and electronic equipment |
The WAGO 231-2305/026-000 is a 5-pole female pluggable connector used to connect electrical wiring to compatible mating connectors in industrial automation, control panels and electronic equipment.
The connector has 5 poles, providing five separate electrical potentials within one pluggable connector.
The connector provides two conductor connection points per pole, giving a total of ten conductor connection points across five electrical potentials.
The WAGO 231-2305/026-000 is designed for copper conductors with a maximum cross-section of 2.5 mm². The permitted conductor range depends on conductor construction and termination preparation.
The connector features a 5.08 mm pin spacing, corresponding to the 0.2-inch pitch used by compatible MCS MIDI Classic connector components.
No. The connector uses Push-in CAGE CLAMP® spring connection technology, eliminating conventional terminal screws. An appropriate operating tool can be used for conductor release and supported conductor insertion procedures.
Yes. The WAGO 231-2305/026-000 includes an integrated end plate, providing an enclosed connector configuration without requiring a separate end plate for this variant.
Yes. Its two-conductor-per-pole arrangement supports loop-through wiring and conductor distribution, allowing two conductors to share each electrical potential where suitable for the application.
The connector features an orange insulating housing, as specified for this WAGO MCS MIDI Classic variant.
The connector belongs to the WAGO MCS MIDI Classic series and is intended for use with compatible male connectors featuring the corresponding 5-pole arrangement, 5.08 mm pitch and mating geometry.
WAGO MCS MIDI Classic pluggable connectors provide dependable electrical interconnection solutions for industrial automation, machine building and control equipment, combining proven Push-in CAGE CLAMP® spring connection technology with flexible wiring arrangements and convenient detachable connector interfaces.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.