Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£9.27
The WAGO 231-2212/026-000 is a 12-pole, 2-conductor female pluggable connector from the WAGO MCS MIDI Classic 231 series. Featuring Push-in CAGE CLAMP® connection technology, a 7.5 mm contact pitch and an integrated end plate, this connector provides a dependable detachable wiring solution for industrial automation, machinery control and electrical equipment.
With two conductor entries per pole, the WAGO 231-2212/026-000 provides 24 conductor connection points across 12 independent electrical potentials. Its loop-through design enables conductors connected to the same pole to remain electrically connected even when the female connector is separated from its mating header. This makes it particularly useful for power distribution, control signals and bus wiring in modular equipment.
The connector has a 16 A IEC rated current and voltage ratings up to 1000 V under specified IEC insulation coordination conditions. Its spring-pressure terminals accept suitable conductors up to 2.5 mm², while the grey polyamide housing, tin-plated copper-alloy contacts and integrated coding fingers support reliable electrical connections and efficient assembly.
The WAGO MCS MIDI Classic series provides modular electrical connection solutions for industrial automation, machinery and electronic equipment. Its range of female pluggable connectors and compatible male headers allows manufacturers to create detachable wiring interfaces while maintaining dependable conductor connections.
The WAGO 231-2212/026-000 is designed for applications requiring multiple loop-through connections. Each of its twelve poles accepts two conductors connected to the same electrical potential, allowing power or control signals to continue through the connector without separate external bridging components.
A major advantage of this arrangement is that electrical continuity between the two conductors connected to each pole remains intact when the connector is unmated. This allows the loop-through wiring path to remain connected while the electrical interface to the separate mating header is disconnected.
The connector's Push-in CAGE CLAMP® technology provides spring-pressure termination for suitable conductor types. Solid and appropriately ferruled conductors can be inserted efficiently, while an operating tool enables conductor actuation when required. This supports consistent installation practices without routine screw tightening.
With its 7.5 mm contact pitch, integrated end plate and coding fingers, the connector provides a defined mating interface for compatible MCS MIDI Classic components. Its grey polyamide housing provides insulation and mechanical support, while tin-plated copper-alloy contacts help maintain reliable electrical conductivity.
Engineers should verify the mating connector's pole count, pitch, coding, retention arrangement and electrical ratings before installation. The complete connection assembly must operate within the limits of its lowest-rated component. The MCS MIDI Classic system does not provide load-breaking capacity, so connectors must not be connected or disconnected while live or under load.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.2 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.2 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 7.5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 12 | |
| Material of contact surface | Tin | |
| Rated voltage | 630 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.2 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer Part Number | 231-2212/026-000 | |
| Series | MCS MIDI Classic 231 | |
| Product Type | 2-conductor female pluggable connector | |
| Connector Gender | Female / socket | |
| Number of Electrical Potentials | 12 | |
| Conductor Entries per Pole | 2 | |
| Total Conductor Connection Points | 24 | |
| Number of Levels | 1 | |
| Contact Pitch | 7.5 mm | |
| Rated Current (IEC) | 16 A | |
| Rated Voltage (IEC, III/3) | 500 V | |
| Rated Voltage (IEC, III/2) | 630 V | |
| Rated Voltage (IEC, II/2) | 1000 V | |
| Rated Impulse Withstand Voltage | 6 kV | |
| Rated Current (UL) | Up to 20 A, subject to applicable approval conditions | |
| Rated Voltage (UL) | Up to 600 V, subject to applicable approval conditions | |
| Connection Technology | Push-in CAGE CLAMP® | |
| Termination Method | Screwless spring-pressure connection | |
| Actuation Method | Operating tool | |
| Solid Conductor Cross-Section | 0.2–2.5 mm² | |
| Fine-Stranded Conductor Cross-Section | 0.2–2.5 mm² | |
| Conductor Size | 24–12 AWG | |
| Conductor Stripping Length | 9–10 mm | |
| Conductor Entry Direction Relative to Mating Direction | 0° | |
| Mounting Arrangement | Free-hanging / in-line pluggable connector | |
| Housing Configuration | Integrated end plate | |
| Coding | Integrated coding fingers | |
| Overall Length | 87.5 mm | |
| Insulation Height | 20.8 mm | |
| Contact Material | Copper alloy | |
| Contact Plating | Tin | |
| Flammability Classification | UL 94 V-0 | |
| Temperature Range | −60 to +85 °C | |
| Standards and Approvals | IEC/EN 60664-1, UL 1059, UL 1977 and CSA | |
| RoHS Status | Compliant | |
| Country of Origin | Poland | |
| GTIN / EAN | 4044918563963 |
The WAGO 231-2212/026-000 is a twelve-pole female pluggable connector with two conductor entries per pole, designed for industrial electrical connections, automation equipment and loop-through power or data bus wiring.
It has twelve poles and twenty-four conductor connection points. Each pole accepts two conductors connected to the same electrical potential, providing twelve independent electrical potentials.
The connector features a 7.5 mm contact pitch and must be paired with a compatible twelve-pole WAGO male connector or PCB header.
The connector has a 16 A IEC rated current. UL ratings of up to 20 A apply under specified approval conditions. The complete connection assembly must remain within the ratings of its mating components and conductors.
The connector is rated at 500 V under IEC category III/3 conditions, 630 V under category III/2 conditions and 1000 V under category II/2 conditions. The applicable voltage depends on the installation's insulation coordination requirements.
The connector accepts suitable solid and fine-stranded conductors in the range of 0.2–2.5 mm², equivalent to approximately 24–12 AWG. Ferrule compatibility and conductor preparation should follow WAGO's datasheet.
Yes. It uses Push-in CAGE CLAMP® spring-pressure terminals, enabling efficient termination of suitable solid and ferruled conductors without screw tightening. An operating tool can be used for conductor actuation.
Yes. The two conductor entries within each pole are internally connected, so continuity between those conductors remains intact when the female connector is unmated. The connection to the separate mating header is disconnected.
Yes. The 231-2212/026-000 features an integrated end plate, providing a complete connector housing arrangement without requiring a separately fitted end plate.
Both are twelve-pole, two-conductor female connectors with Push-in CAGE CLAMP® technology and integrated end plates. The 231-2112/026-000 has a 5 mm contact pitch, whereas the 231-2212/026-000 has a 7.5 mm contact pitch. They should not be treated as interchangeable without confirming mating compatibility.
WAGO MCS MIDI Classic connectors provide dependable pluggable electrical interfaces for industrial automation, machinery and electronic equipment. The 231-2212/026-000 combines twelve electrical poles, twenty-four Push-in CAGE CLAMP® conductor connections, a 7.5 mm contact pitch and an integrated end plate to support efficient wiring, reliable loop-through connections and modular industrial installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.