Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£6.19
The WAGO 231-2208/026-000 is an 8-pole, 2-conductor female pluggable connector from the WAGO MCS MIDI Classic 231 series. Featuring Push-in CAGE CLAMP® connection technology, a 7.5 mm contact pitch and an integrated end plate, this connector provides a reliable, detachable electrical interface for industrial automation, machinery control and electronic equipment.
With two conductor entries per pole, the WAGO 231-2208/026-000 provides sixteen conductor connection points across eight independent electrical potentials. This arrangement is particularly useful for looping through power supplies and data buses, maintaining electrical continuity between conductors connected to the same pole even when the connector is disconnected from its mating header.
Rated at 16 A under IEC standards, with voltage ratings of up to 1000 V under specified IEC insulation coordination conditions, the connector supports demanding industrial connection requirements. Its spring-pressure terminals accommodate conductors up to 2.5 mm², while the grey insulating housing, tin-plated copper-alloy contacts and coding fingers support dependable assembly and maintenance.
The WAGO MCS MIDI Classic series provides modular electrical connection solutions for industrial automation, machinery and electronic equipment. Its range of pluggable female connectors and compatible male headers allows manufacturers to create detachable wiring interfaces while maintaining dependable conductor connections.
The WAGO 231-2208/026-000 is particularly suited to applications requiring multiple loop-through connections. Each of its eight poles accepts two conductors connected to the same electrical potential, allowing power supplies or signal buses to pass through the connector without additional external bridging components.
Importantly, electrical continuity between the two conductors connected to each pole remains intact when the connector is unmated. This can simplify modular equipment servicing where a connection to an individual PCB or device must be disconnected without interrupting the corresponding loop-through wiring path.
The connector's Push-in CAGE CLAMP® technology provides reliable spring-pressure termination for suitable solid and ferruled conductors. This design supports efficient conductor installation, reduces dependence on screw-tightening procedures and offers a practical solution for production wiring and maintenance.
With its 7.5 mm contact pitch, integrated end plate and coding fingers, the 231-2208/026-000 provides a defined interface for compatible MCS MIDI Classic components. Its grey polyamide housing provides insulation and mechanical support, while tin-plated copper-alloy contacts help maintain dependable electrical connectivity.
For safe integration, engineers should verify the mating connector's pole count, pitch, coding, retention arrangement and applicable electrical ratings. The complete assembly must operate within the limits of its lowest-rated component. Pluggable connections must not be used for load-breaking unless expressly permitted by the manufacturer.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.2 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.2 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 7.5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 8 | |
| Material of contact surface | Tin | |
| Rated voltage | 630 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.2 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer Part Number | 231-2208/026-000 | |
| Series | MCS MIDI Classic 231 | |
| Product Type | 2-conductor female pluggable connector | |
| Connector Gender | Female / socket | |
| Number of Electrical Potentials | 8 | |
| Conductor Entries per Pole | 2 | |
| Total Conductor Connection Points | 16 | |
| Contact Pitch | 7.5 mm | |
| Rated Current (IEC) | 16 A | |
| Rated Voltage (IEC, III/3) | 500 V | |
| Rated Voltage (IEC, III/2) | 630 V | |
| Rated Voltage (IEC, II/2) | 1000 V | |
| Rated Impulse Withstand Voltage | 6 kV | |
| Rated Current (UL) | Up to 20 A, subject to approval conditions | |
| Rated Voltage (UL) | Up to 600 V, subject to approval conditions | |
| Connection Technology | Push-in CAGE CLAMP® | |
| Termination Method | Screwless spring-pressure connection | |
| Actuation Method | Operating tool | |
| Solid Conductor Cross-Section | 0.2–2.5 mm² | |
| Fine-Stranded Conductor Cross-Section | 0.2–2.5 mm² | |
| Fine-Stranded Conductor with Insulated Ferrule | 0.25–1.5 mm² | |
| Fine-Stranded Conductor with Uninsulated Ferrule | 0.25–2.5 mm² | |
| Conductor Size | 24–12 AWG | |
| Conductor Stripping Length | 9–10 mm | |
| Conductor Entry Direction Relative to Mating Direction | 0° | |
| Mounting Arrangement | Free-hanging / in-line pluggable connection | |
| Housing Configuration | Integrated end plate | |
| Coding | Integrated coding fingers | |
| Contact Material | Copper alloy | |
| Contact Plating | Tin | |
| Flammability Classification | UL 94 V-0 | |
| Temperature Range | −60 to +85 °C | |
| Standards and Approvals | IEC/EN 60664-1, UL 1059, UL 1977 and CSA | |
| Country of Origin | Poland | |
| GTIN / EAN | 4044918563840 |
The WAGO 231-2208/026-000 is an eight-pole female pluggable connector with two conductor entries per pole, designed for industrial electrical connections, automation equipment and loop-through power or data bus wiring.
It has eight poles and sixteen conductor connection points. Each pole accepts two conductors connected to the same electrical potential, providing eight independent electrical potentials.
The connector features a 7.5 mm contact pitch and must be paired with a compatible eight-pole WAGO male connector or PCB header.
The connector has a 16 A IEC rated current. UL ratings of up to 20 A apply under specified approval conditions. The complete connection assembly must remain within the ratings of its mating components and conductors.
The connector is rated at 500 V under IEC category III/3 conditions, 630 V under category III/2 conditions and 1000 V under category II/2 conditions. The applicable rating depends on insulation coordination requirements.
The connector accepts 0.2–2.5 mm² solid and fine-stranded conductors. Fine-stranded conductors with insulated ferrules are specified from 0.25–1.5 mm², while those with uninsulated ferrules are specified from 0.25–2.5 mm².
Yes. It uses Push-in CAGE CLAMP® spring-pressure terminals, enabling efficient termination of suitable solid and ferruled conductors without screw tightening. An operating tool can be used for conductor actuation.
Yes. The two conductor entries within each pole are internally connected, so continuity between those conductors remains intact when the female connector is unmated. The separate connection to the mating header is disconnected.
Yes. The 231-2208/026-000 features an integrated end plate, providing a complete connector housing arrangement without requiring a separately fitted end plate.
Both are eight-pole, two-conductor female connectors with Push-in CAGE CLAMP® technology and integrated end plates. The 231-2108/026-000 has a 5 mm contact pitch, whereas the 231-2208/026-000 has a 7.5 mm contact pitch. They should not be treated as interchangeable without confirming mating compatibility.
WAGO MCS MIDI Classic connectors provide dependable pluggable electrical interfaces for industrial automation, machinery and electronic equipment. The 231-2208/026-000 combines eight electrical poles, sixteen Push-in CAGE CLAMP® conductor connections, a 7.5 mm contact pitch and an integrated end plate to support efficient wiring, reliable loop-through connections and modular industrial installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.