Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£6.10
The WAGO 231-212/031-000 is a 12-pole female pluggable connector with a clamping collar from the WAGO MCS MIDI Classic 231 Series. Designed for industrial electrical connections, automation equipment and modular control systems, this connector combines 7.5 mm pin spacing, CAGE CLAMP® spring connection technology and a mechanically supported mating interface for reliable, detachable wiring.
Featuring twelve independent electrical connection positions, the WAGO 231-212/031-000 accepts solid and fine-stranded copper conductors from 0.08 to 2.5 mm² (28–12 AWG). Its CAGE CLAMP® terminals enable screwless conductor termination using an operating tool, while vertical and horizontal actuation supports efficient cable pre-assembly and equipment wiring. Integrated test ports and coding fingers provide additional functionality for commissioning, maintenance and connector configuration.
With a 16 A IEC rated current, an IEC rated voltage of up to 1,000 V under the applicable insulation coordination conditions and a clamping collar with mounting flange, this connector is suitable for industrial control, signalling and appropriately rated power connections. Its grey polyamide housing and detachable construction make it a practical choice for machine builders, panel manufacturers and industrial equipment designers.
The WAGO MCS MIDI Classic connector system provides a dependable solution for modular electrical wiring in industrial machinery, automation cabinets and electronic control equipment. The 231-212/031-000 combines twelve CAGE CLAMP® conductor terminations with a female pluggable mating interface and a clamping collar. Its mounting flange and retention features support mechanically secure connector assemblies, while the spring-clamp terminals provide consistent conductor retention without conventional terminal screws.
With 7.5 mm pin spacing, a 16 A IEC rated current and conductor compatibility up to 2.5 mm², the connector supports industrial control, signalling and appropriately rated power connections. The selected male connector must match the twelve-pole configuration, contact spacing, retention arrangement and applicable electrical ratings. As a connector without breaking capacity, it must not be connected or disconnected while live or under load.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 7.5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 12 | |
| Material of contact surface | Tin | |
| Rated voltage | 630 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic / 231 Series | |
| Manufacturer part number | 231-212/031-000 | |
| Product type | 1-conductor female pluggable connector with clamping collar | |
| Connector gender | Female | |
| Number of connection positions | 12 | |
| Number of levels | 1 | |
| Conductors per pole | 1 | |
| Pin spacing | 7.5 mm | |
| Connection technology | CAGE CLAMP® | |
| Actuation method | Operating tool | |
| Conductor entry orientation | 180° relative to mating direction | |
| Mounting type | Free-hanging / in-line cable connection | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, maximum specified) | 1,000 V | |
| Rated voltage (UL) | 600 V | |
| Rated current (UL) | 15 A | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Insulation height | 14.3 mm | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Insulating housing material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Integrated test ports | Yes | |
| Coding fingers | Yes | |
| Manufacturer product reference | WAGO 231-212/031-000 |
The WAGO 231-212/031-000 is a twelve-pole female pluggable connector with a clamping collar, designed for detachable electrical connections in industrial automation, control equipment and modular electrical assemblies.
The clamping collar and mounting flange provide mechanical support for the connector assembly. Together with the retention features, they help maintain secure connector positioning when used with suitable mating components and mounting arrangements.
The connector accepts solid and fine-stranded copper conductors from 0.08 to 2.5 mm² (28–12 AWG). The recommended stripping length is 8–9 mm, and conductors are terminated using CAGE CLAMP® spring connection technology.
The connector has a 16 A IEC rated current and a maximum specified IEC rated voltage of 1,000 V, depending on the applicable insulation coordination conditions. Its UL ratings are 600 V and 15 A.
Yes. The connector includes integrated test ports for electrical measurements and coding fingers for connector configuration. It should be paired with a compatible twelve-pole male connector featuring matching 7.5 mm contact spacing and suitable mechanical and electrical characteristics.
WAGO MCS MIDI Classic pluggable connectors combine reliable spring-clamp conductor termination with modular electrical connectivity for industrial automation, machine building and electronic control equipment. The 231-212/031-000 provides a twelve-pole female connection interface with a clamping collar, integrated test ports and CAGE CLAMP® technology to support organised wiring, mechanically secure connector assemblies and straightforward equipment maintenance.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.