Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£8.18
The WAGO 231-2111/026-000 is a reliable 11-pole, 2-conductor female pluggable connector designed for industrial electrical connections, automation equipment and modular wiring systems. Part of the WAGO 231 Series MCS MIDI Classic (Multi Connection System), this connector features 5 mm pin spacing, Push-in CAGE CLAMP® spring pressure connection technology and a grey insulating housing.
Designed for efficient and dependable electrical installation, the WAGO 231-2111/026-000 provides two conductor connection points per pole, allowing convenient looping of power or signal circuits through compatible equipment. Its spring pressure connection system eliminates the need for screw terminals and supports direct insertion of suitable solid conductors and fine-stranded conductors fitted with ferrules. The integrated end plate and coding fingers provide additional functionality for modular connector assemblies.
With an IEC rated current of 16 A, conductor capacity of up to 2.5 mm² and 11 electrical poles, the 231-2111/026-000 is suitable for industrial control systems, electronic equipment and PCB-to-wire connection applications. Its 5 mm contact pitch and pluggable construction support compact equipment layouts, straightforward assembly and convenient maintenance.
Pluggable female connectors such as the WAGO 231-2111/026-000 provide a practical interface between field wiring and compatible electronic equipment. The Push-in CAGE CLAMP® connection system uses spring pressure to maintain secure conductor contact without screw tightening, helping reduce installation effort and supporting reliable connections in industrial electrical assemblies.
The WAGO MCS MIDI Classic connector system supports modular electrical equipment design by allowing wiring assemblies to be disconnected from compatible male headers when equipment is safely isolated. The two-conductor-per-pole arrangement is particularly useful for looping power or data buses between connected devices. Its design allows the bus connection within the female connector to remain intact when the connector is unmated, supporting flexible equipment servicing and replacement.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.2 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.2 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 11 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.2 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | 231 Series – MCS MIDI Classic | |
| Model | 231-2111/026-000 | |
| Manufacturer part number | 231-2111/026-000 | |
| Product type | 2-conductor female pluggable connector | |
| Connector system | MCS – Multi Connection System | |
| Conductor entries per pole | 2 | |
| Total conductor entries | 22 | |
| Number of connection levels | 1 | |
| Pin spacing | 5 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated voltage (UL) | 600 V | |
| Conductor cross-section | 0.2–2.5 mm² | |
| Conductor size (AWG) | 24–12 AWG | |
| Connection technology | Push-in CAGE CLAMP® | |
| Termination type | Screwless spring pressure connection | |
| Conductor strip length | 9–10 mm | |
| Connector gender | Female | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Insulation material | Polyamide | |
| Flammability classification | UL94 V0 | |
| Operating temperature range | −60 to +85 °C | |
| Width | 55 mm | |
| Height | 20.8 mm | |
| Depth | 26.45 mm | |
| Weight | Approximately 24.4 g | |
| Mounting type | Pluggable / free-hanging connector | |
| Standards and approvals | IEC/EN 61984, UL 1059, UL 1977 and CSA | |
| RoHS compliance | Compliant | |
| Country of origin | Poland | |
| GTIN / EAN | 4044918563192 |
The WAGO 231-2111/026-000 is an 11-pole female pluggable connector used to connect electrical conductors to compatible male headers in industrial automation, electronic control equipment and modular wiring systems.
The connector features 11 poles with two conductor entries per pole, providing a total of 22 conductor connection points. This arrangement supports convenient loop-through wiring for power and signal circuits.
The connector supports conductor cross-sections from 0.2 to 2.5 mm² using Push-in CAGE CLAMP® technology. Suitable solid conductors and stranded conductors fitted with appropriate ferrules can be inserted directly.
The connector has an IEC rated current of 16 A and rated voltages of 320 V or 630 V, depending on the applicable overvoltage category and pollution degree. Its rated impulse voltage is 4 kV.
The two-conductor-per-pole design allows power or signal circuits to be looped through the connector. This is useful for bus wiring applications because the electrical connection between the two conductor entries can remain intact when the female connector is disconnected from its mating header.
WAGO MCS MIDI Classic connectors provide dependable, modular electrical connections for industrial automation, control equipment and OEM electrical assemblies. The WAGO 231-2111/026-000 combines 11-pole connectivity, two conductor entries per pole and Push-in CAGE CLAMP® technology to support efficient installation, reliable wiring and maintainable electrical systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.