Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£5.92
The WAGO 231-2108/026-000 is an 8-pole, 2-conductor female pluggable connector from the WAGO MCS MIDI Classic 231 Series. Featuring Push-in CAGE CLAMP® technology, a 5 mm contact pitch and an integrated end plate, this grey connector provides a compact, dependable wiring interface for industrial automation, control electronics and modular electrical equipment.
With two conductor entries per pole, the connector provides 16 conductor connection points across eight electrical potentials. This configuration is particularly useful for looping through power supplies, control signals and data buses without installing separate distribution terminals at every connection point.
The WAGO 231-2108/026-000 supports conductor cross-sections up to 2.5 mm² and has an IEC rated current of 16 A. Its spring-pressure connection technology eliminates the need for screw tightening and supports efficient conductor installation, while the detachable female interface enables convenient equipment assembly and servicing.
Unlike variants equipped with lateral locking levers, the /026-000 configuration features an integrated end plate. This makes it important to select the correct mating connector and mechanical retention arrangement for the intended installation.
Technical selection note: Electrical ratings depend on the applicable approval standard, mating connector and installation conditions. The complete WAGO datasheet should be consulted for detailed insulation coordination ratings, ferrule-specific conductor ranges and dimensional tolerances.
The WAGO 231-2108/026-000 uses Push-in CAGE CLAMP® technology to create secure conductor connections without conventional screw terminals. The spring-pressure mechanism maintains contact force on the conductor and supports reliable electrical performance in industrial environments.
Suitable solid and ferruled conductors can be inserted directly into the terminal connection, reducing wiring time during production and installation. An appropriate operating tool can be used to actuate the spring clamp when connecting other permitted conductor types or removing installed wires.
Each of the eight electrical potentials has two conductor connection points. The two entries belonging to the same pole are electrically interconnected, making the connector particularly useful for power distribution and data bus loop-through applications.
Importantly, the internal connection between the two conductor entries remains intact even when the female connector is unplugged from its mating header. In correctly designed systems, this can help preserve continuity along a distribution or communication circuit while allowing the connected equipment module to be serviced.
The integrated end plate distinguishes this version from the WAGO 231-2108/037-000, which features lateral locking levers. Both connector variants should be selected according to the mechanical requirements of the mating interface.
The MCS MIDI Classic connector system is designed for electrical connections without breaking capacity. Connectors must not be mated or disconnected while live or under load, and the equipment design must prevent accessible unmated header contacts from carrying hazardous voltages.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.2 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.2 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 8 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.2 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | 231 Series / MCS MIDI Classic | |
| Manufacturer part number | 231-2108/026-000 | |
| Product type | 2-conductor female pluggable connector | |
| Number of electrical potentials | 8 | |
| Conductors per pole | 2 | |
| Total conductor connection points | 16 | |
| Number of levels | 1 | |
| Contact gender | Female / socket | |
| Connection technology | Push-in CAGE CLAMP® | |
| Termination method | Screwless spring-pressure / push-in | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated current (UL) | 20 A | |
| Rated voltage (UL) | 600 V | |
| Pin spacing / pitch | 5 mm | |
| Conductor cross-section | 0.2–2.5 mm² | |
| Conductor size | 24–12 AWG | |
| Conductor stripping length | 9–10 mm | |
| Conductor entry | In-line / 180° plug wire entry | |
| Mounting arrangement | Free-hanging / cable-mounted | |
| Housing configuration | Integrated end plate | |
| Coding | Integrated coding fingers | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Insulation material | Polyamide | |
| Flammability classification | UL94 V-0 | |
| Temperature range | −60 to +85 °C | |
| Nominal connector length | 40 mm, calculated using WAGO's dimensional formula | |
| Compliance | RoHS compliant | |
| Country of origin | Poland | |
| GTIN / EAN | 4044918563086 |
The WAGO 231-2108/026-000 is an 8-pole, 2-conductor female pluggable connector used for detachable electrical connections in industrial automation, control equipment and electronic assemblies. Its two-conductor-per-pole configuration is especially useful for power and signal loop-through wiring.
The connector has 8 poles, providing eight separate electrical potentials. Each pole has two conductor entries, giving a total of 16 conductor connection points.
The connector has a 5 mm pitch between adjacent electrical contact positions and is intended for use with compatible WAGO MCS MIDI Classic mating connectors.
The WAGO 231-2108/026-000 has an IEC rated current of 16 A. A 20 A UL current rating is also specified, subject to the relevant approval conditions.
The connector supports conductor cross-sections from 0.2 to 2.5 mm², equivalent to approximately 24–12 AWG. The permitted size may vary depending on conductor construction and ferrule type.
Push-in CAGE CLAMP® is WAGO's spring-pressure conductor connection technology. It allows suitable solid and ferruled conductors to be inserted directly while providing a reliable screwless electrical connection.
It means that each of the eight poles has two conductor entries. These entries are internally connected within each pole, allowing power or signals to be looped through the connector.
Yes. The two conductor entries belonging to each pole remain electrically connected inside the female connector when it is unmated, helping maintain continuity in appropriately designed power and data bus circuits.
The 231-2108/026-000 features an integrated end plate, while the 231-2108/037-000 features lateral locking levers. Both are 8-pole, 2-conductor female connectors with Push-in CAGE CLAMP® technology and a 5 mm pitch.
The specified conductor stripping length is 9–10 mm.
Yes. Its detachable connector interface, two-conductor connection arrangement and spring-pressure termination make it suitable for industrial automation, control panels and modular electronic equipment when the electrical and mechanical specifications match the application.
No. The WAGO MCS MIDI Classic system uses connectors without breaking capacity. The connector must not be connected or disconnected while live or under load, and the electrical circuit should be safely isolated before mating or separation.
WAGO MCS MIDI Classic connectors offer reliable, modular electrical interconnections for industrial equipment. Combining Push-in CAGE CLAMP® technology, a compact 5 mm pitch, two-conductor loop-through wiring and an integrated end plate, the WAGO 231-2108/026-000 provides a practical solution for efficient, serviceable eight-pole electrical connections.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.