Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£5.18
The WAGO 231-2107/026-000 is a 7-pole, 2-conductor female pluggable connector from the WAGO MCS MIDI Classic 231 series. Featuring Push-in CAGE CLAMP® connection technology, a 5 mm contact pitch and an integrated end plate, this connector provides a practical solution for industrial automation, control-panel wiring and modular electrical equipment.
Designed with two conductor entries per pole, the WAGO 231-2107/026-000 provides fourteen conductor connection points across seven independent electrical potentials. This configuration is particularly useful for looping through power supplies, control signals and data buses, allowing electrical continuity between the two conductors connected to each pole even when the female connector is disconnected from its mating header.
With a 16 A IEC rated current, conductor capacity up to 2.5 mm² and a grey polyamide 66 housing, the connector combines flexible wiring with dependable spring-pressure termination. Its integrated end plate, coding capability and compact construction make it suitable for industrial equipment requiring organised, detachable electrical connections.
The WAGO MCS MIDI Classic series provides modular electrical connection solutions for industrial automation, machinery and electronic equipment. Its range of pluggable female connectors and compatible male headers allows manufacturers to establish detachable electrical interfaces while maintaining dependable conductor connections.
The WAGO 231-2107/026-000 features a two-conductor-per-pole arrangement designed for efficient loop-through wiring. Each of its seven poles accepts two conductors connected to the same electrical potential, enabling power supplies, control signals or data buses to continue through the connector without requiring separate external bridging wires.
A significant advantage of this configuration is that electrical continuity between the two conductors connected to each pole remains intact when the connector is unmated. This allows the loop-through connection to remain established while the connection to the separate mating header is disconnected, making the design particularly useful in modular industrial equipment.
The connector uses Push-in CAGE CLAMP® technology to provide reliable spring-pressure conductor termination. Suitable solid and ferruled conductors can be inserted efficiently, while an operating tool provides access for conductor actuation when required. The spring-pressure connection eliminates screw tightening and supports consistent assembly practices.
Its 5 mm contact pitch, seven-pole configuration and integrated end plate provide a compact connection interface for compatible WAGO MCS MIDI Classic male connectors. Variable coding capability and anti-rotation protection support organised connector installation, while the grey polyamide housing and tin-plated contacts provide mechanical and electrical reliability.
When selecting a mating connector, engineers should verify the pole count, contact pitch, coding arrangement and applicable electrical ratings. The complete connector assembly must remain within the ratings of its lowest-rated component. The MCS MIDI Classic system does not provide load-breaking capacity, so connectors must not be mated or unmated while live or under load.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.2 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.2 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 7 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.2 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer Part Number | 231-2107/026-000 | |
| Series | MCS MIDI Classic 231 | |
| Product Type | 2-conductor female pluggable connector | |
| Connector Gender | Female / socket | |
| Number of Electrical Potentials | 7 | |
| Conductor Entries per Pole | 2 | |
| Total Conductor Connection Points | 14 | |
| Number of Connection Types | 1 | |
| Number of Levels | 1 | |
| Contact Pitch | 5 mm | |
| Rated Current (IEC) | 16 A | |
| Rated Voltage (IEC, III/3) | 320 V | |
| Rated Voltage (IEC, III/2) | 320 V | |
| Rated Voltage (IEC, II/2) | 630 V | |
| Rated Impulse Withstand Voltage | 4 kV | |
| Rated Voltage (UL 1059, Group B) | 300 V | |
| Rated Current (UL 1059, Group B) | 20 A | |
| Rated Voltage (UL 1059, Group D) | 300 V | |
| Rated Current (UL 1059, Group D) | 10 A | |
| Rated Voltage (UL 1977) | 600 V | |
| Rated Current (UL 1977) | 20 A | |
| Rated Voltage (CSA, Group B) | 300 V | |
| Rated Current (CSA, Group B) | 15 A | |
| Rated Voltage (CSA, Group D) | 300 V | |
| Rated Current (CSA, Group D) | 10 A | |
| Connection Technology | Push-in CAGE CLAMP® | |
| Termination Method | Screwless spring-pressure connection | |
| Actuation Method | Operating tool | |
| Solid Conductor Cross-Section | 0.2–2.5 mm² | |
| Fine-Stranded Conductor Cross-Section | 0.2–2.5 mm² | |
| Fine-Stranded Conductor with Insulated Ferrule | 0.25–1.5 mm² | |
| Fine-Stranded Conductor with Uninsulated Ferrule | 0.25–2.5 mm² | |
| Conductor Size (AWG) | 24–12 AWG | |
| Conductor Stripping Length | 9–10 mm | |
| Conductor Entry Direction Relative to Mating Direction | 0° | |
| Mounting Type | Free-hanging / in-line pluggable connector | |
| Housing Configuration | Integrated end plate | |
| Plug-In Connection Locking | Without locking mechanism | |
| Variable Coding | Yes | |
| Anti-Rotation Protection | Yes | |
| Dedicated Mismating Protection | No | |
| Width | 35 mm | |
| Height | 20.8 mm | |
| Depth | 26.45 mm | |
| Weight | Approximately 15.488 g | |
| Contact Material | Copper alloy | |
| Contact Plating | Tin | |
| Clamping Spring Material | Chrome-nickel spring steel | |
| Insulating Material Group | I | |
| Flammability Classification | UL 94 V-0 | |
| Fire Load | 0.248 MJ | |
| Temperature Limit Range | −60 to +85 °C | |
| Standards and Approvals | IEC/EN 60664-1, IEC 61984, UL 1059, UL 1977 and CSA | |
| Country of Origin | Poland | |
| GTIN / EAN | 4044918563055 | |
| Manufacturer Standard Packaging Unit | 50 pieces |
The WAGO 231-2107/026-000 is a seven-pole female pluggable connector with two conductor entries per pole, designed for industrial automation, electrical equipment and loop-through power or signal wiring.
It has seven poles and fourteen conductor connection points. Each pole accepts two conductors connected to the same electrical potential, providing seven independent electrical potentials.
The connector features a 5 mm contact pitch and must be paired with a compatible seven-pole WAGO male connector or PCB header.
The connector has a 16 A IEC rated current. Under UL 1059, the rated current is 20 A for Use Group B and 10 A for Use Group D, depending on the applicable approval conditions.
The connector is rated at 320 V under IEC category III/3 and III/2 conditions, and 630 V under IEC category II/2 conditions. The applicable voltage depends on the installation's overvoltage category, pollution degree and insulation coordination requirements.
The connector accepts 0.2–2.5 mm² solid and fine-stranded conductors. Fine-stranded conductors with insulated ferrules are specified from 0.25–1.5 mm², while those with uninsulated ferrules are specified from 0.25–2.5 mm².
Yes. The connector uses Push-in CAGE CLAMP® spring-pressure terminals, allowing suitable solid and ferruled conductors to be connected without screw tightening. An operating tool is used for conductor actuation where necessary.
No. The 231-2107/026-000 has an integrated end plate and no separate plug-in locking mechanism. Applications requiring additional connector retention should use a manufacturer-approved compatible locking arrangement or connector variant.
Yes. The two conductor entries within each pole are internally connected, so continuity between those conductors is retained when the female connector is unmated. The electrical connection to the separate mating header is disconnected.
Both are seven-pole, two-conductor female connectors from the WAGO MCS MIDI Classic series with a 5 mm contact pitch. The 231-2107/026-000 has an integrated end plate without separate plug-in locking, whereas the 231-2107/037-000 features lateral locking levers. Compatibility should be verified before substitution.
WAGO MCS MIDI Classic connectors provide dependable pluggable electrical interfaces for industrial automation, machinery and electronic equipment. The 231-2107/026-000 combines seven electrical poles, fourteen Push-in CAGE CLAMP® conductor connections, a 5 mm contact pitch and an integrated end plate to support efficient wiring, reliable loop-through connections and modular electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.