Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£4.47
The WAGO 231-2106/026-000 is a compact and reliable 6-pole, 2-conductor female pluggable connector designed for secure electrical connections in industrial automation, control panels and electronic equipment. Part of the WAGO MCS MIDI Classic 231 series, this connector incorporates Push-in CAGE CLAMP® spring connection technology for efficient conductor termination without conventional screw terminals.
Featuring two conductor connection points per pole, the connector enables convenient loop-through wiring and electrical distribution across six independent potentials. Its 5 mm pin spacing, integrated end plate and grey insulating housing provide a compact, practical solution for modular electrical assemblies and machinery connections.
With a rated current of 16 A, a rated voltage of up to 630 V under IEC overvoltage category II and support for conductors up to 2.5 mm², the WAGO 231-2106/026-000 is suitable for industrial wiring applications requiring reliable, detachable electrical connections. Its push-in termination system helps simplify installation and maintenance in electrical control equipment.
The WAGO 231-2106/026-000 uses Push-in CAGE CLAMP® technology to establish dependable electrical connections through spring pressure rather than conventional screw terminals. Solid conductors and suitably ferruled conductors can be inserted directly, while an operating tool is used where required for conductor insertion or release. This connection system simplifies wiring and provides consistent contact pressure in industrial electrical assemblies.
Its dual conductor entries per pole enable loop-through connections, allowing power or signals to be distributed through six independent electrical potentials. Electrical continuity between the two conductor entries of each pole is maintained even when the connector is disconnected from its mating component, supporting convenient maintenance and modular system design.
The connector features an integrated end plate and a compact grey polyamide housing, making it suitable for equipment where installation space and connection reliability are important. When paired with a compatible mating connector from the WAGO MCS MIDI Classic system, it provides a practical detachable interface for electrical equipment, control systems and machinery.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.2 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.2 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 6 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.2 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic 231 | |
| Model | 231-2106/026-000 | |
| Product type | Pluggable female connector / terminal block | |
| Connector configuration | 2-conductor female connector | |
| Number of connection points | 12 | |
| Number of electrical potentials | 6 | |
| Number of levels | 1 | |
| Connection technology | Push-in CAGE CLAMP® | |
| Conductor termination | Spring-pressure connection | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| Rated voltage (UL, Use Group B) | 300 V | |
| Rated current (UL, Use Group B) | 20 A | |
| Rated voltage (UL, Use Group D) | 300 V | |
| Rated current (UL, Use Group D) | 10 A | |
| Pin spacing | 5 mm | |
| Solid conductor cross-section | 0.2–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.2–2.5 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor size (AWG) | 24–12 AWG | |
| Strip length | 9–10 mm | |
| Actuation type | Operating tool | |
| Conductor entry direction relative to mating direction | 0° | |
| Connector gender | Female / socket | |
| Connector locking | Without locking mechanism | |
| Housing configuration | Integrated end plate | |
| Insulation material | Polyamide 66 (PA66) | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Flammability classification | UL 94 V-0 | |
| Temperature limit range | −60 to +85 °C | |
| Dimensions (W × H × D) | 30 × 20.8 × 26.45 mm | |
| GTIN / EAN | 4044918563024 |
The WAGO 231-2106/026-000 is a 6-pole female pluggable connector designed for detachable electrical connections in industrial automation, control panels, electronic equipment and modular electrical systems.
The connector provides six poles with two conductor entries per pole, giving a total of 12 connection points across six independent electrical potentials.
The connector has an IEC rated current of 16 A. Its rated voltage is 320 V under overvoltage category III and 630 V under overvoltage category II, pollution degree 2.
The connector accepts solid and fine-stranded conductors from 0.2 to 2.5 mm². Fine-stranded conductors with insulated ferrules are supported from 0.25 to 1.5 mm², while uninsulated ferrules are supported from 0.25 to 2.5 mm².
No. The connector uses Push-in CAGE CLAMP® spring connection technology, allowing conductor termination without conventional terminal screws. An operating tool is used when required for conductor insertion or release.
Yes. The WAGO 231-2106/026-000 features an integrated end plate, providing a complete housing configuration for its six-pole female connector arrangement.
No. This version is supplied without a plug-in locking mechanism. It features an integrated end plate rather than the lateral locking levers available on other connector variants in the WAGO 231 series.
Yes. Its two conductor entries per pole allow power and signal circuits to be looped through the connector, with electrical continuity between the conductor entries maintained when the plug is disconnected from its mating component.
WAGO MCS MIDI Classic pluggable connectors provide dependable electrical connection solutions for industrial machinery, control systems and electronic equipment. The WAGO 231-2106/026-000 combines Push-in CAGE CLAMP® technology, a compact six-pole configuration and an integrated end plate to support efficient wiring, reliable operation and convenient servicing in modern electrical assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.