Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.71
The WAGO 231-2105/026-000 is a high-quality 5-pole, 2-conductor pluggable female connector with integrated end plate, designed for reliable electrical connections in industrial automation, control panels and electrical equipment. As part of the established WAGO 231 Series MCS MIDI Classic connector range, it incorporates advanced Push-in CAGE CLAMP® spring pressure connection technology to provide secure, screwless conductor termination and efficient electrical installation.
Designed for flexible wiring and convenient cable pre-assembly, the WAGO 231-2105/026-000 features two conductor entries per pole, providing ten connection points across five independent electrical potentials. This arrangement is particularly useful for looping through power and data buses, as the internal connection between conductors within each pole is maintained even when the connector is disconnected from its mating component. The Push-in CAGE CLAMP® connection system allows suitable solid and ferruled conductors to be inserted directly, helping reduce wiring time and simplify installation.
Featuring a 5 mm contact pitch, a 16 A IEC rated current and support for conductor cross-sections from 0.2–2.5 mm², the WAGO 231-2105/026-000 is suitable for industrial control circuits, modular wiring and electrical bus distribution systems. The connector provides a rated voltage of 320 V under IEC overvoltage category III conditions and 630 V under overvoltage category II, pollution degree 2 conditions. Its compact grey polyamide housing, integrated end plate, configurable coding features and robust spring pressure connections make it a dependable solution for professional industrial electrical applications.
Pluggable electrical connectors such as the WAGO 231-2105/026-000 provide an efficient method of connecting multiple conductors in industrial machinery, electrical control panels and automation systems. Its distinctive two-conductor-per-pole configuration allows incoming and outgoing conductors to be terminated within the same electrical potential, making it particularly suitable for power distribution and data bus loop-through wiring. The internal connection between conductors within each pole remains intact even when the female connector is separated from its mating component, helping preserve continuity through the wiring arrangement.
The WAGO MCS MIDI Classic 231 Series is designed for industrial electrical installations requiring modular wiring, flexible assembly and reliable conductor termination. Its advanced Push-in CAGE CLAMP® system allows suitable solid and ferruled conductors to be inserted directly, while an operating tool provides access for other conductor types and conductor removal. The 231-2105/026-000 also features an integrated end plate, coding fingers and anti-rotation protection, supporting consistent connector assembly and straightforward maintenance. Compatible system counterparts include the WAGO 231-605 male connector, WAGO 231-135/001-000 straight THT PCB header and WAGO 231-435/001-000 angled THT PCB header. As the connector system does not provide breaking capacity under IEC 61984, it must not be connected or disconnected while live or under load.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.2 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.2 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 5 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.2 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | 231 Series - MCS MIDI Classic | |
| Model | 231-2105/026-000 | |
| Product type | 2-conductor pluggable female connector with integrated end plate | |
| Connector gender | Female | |
| Connection technology | Push-in CAGE CLAMP® spring pressure connection | |
| Conductor entries per pole | 2 | |
| Total connection points | 10 | |
| Number of electrical potentials | 5 | |
| Number of connection types | 1 | |
| Number of levels | 1 | |
| Contact pitch | 5 mm | |
| Rated current | 16 A (IEC) | |
| Rated voltage (III / 3) | 320 V | |
| Rated voltage (III / 2) | 320 V | |
| Rated voltage (II / 2) | 630 V | |
| Rated impulse voltage | 4 kV | |
| UL 1059 rated voltage (Use Group B) | 300 V | |
| UL 1059 rated current (Use Group B) | 20 A | |
| UL 1059 rated voltage (Use Group D) | 300 V | |
| UL 1059 rated current (Use Group D) | 10 A | |
| UL 1977 rated voltage | 600 V | |
| UL 1977 rated current | 20 A | |
| CSA rated voltage (Use Group B) | 300 V | |
| CSA rated current (Use Group B) | 15 A | |
| CSA rated voltage (Use Group D) | 300 V | |
| CSA rated current (Use Group D) | 10 A | |
| Solid conductor cross-section | 0.2–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.2–2.5 mm² | |
| Conductor size | 24–12 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor strip length | 9–10 mm | |
| Actuation method | Direct push-in for suitable conductors / operating tool | |
| Actuation direction | Parallel to conductor entry | |
| Conductor entry direction | 0° relative to mating direction | |
| Bus loop-through functionality | Yes | |
| Internal bus continuity when unmated | Yes | |
| Integrated end plate | Yes | |
| Variable coding | Yes, coding fingers | |
| Anti-rotation protection | Yes | |
| Mismating protection | No, suitable connector coding must be configured where required | |
| Plugging without loss of pin spacing | Yes | |
| Mounting type | Free-hanging / cable mounting | |
| Insulation material group | I | |
| Flammability classification | UL94 V-0 | |
| Clamping spring material | Chrome-nickel spring steel (CrNi) | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Temperature limit range | −60 to +85 °C | |
| Processing temperature | −35 to +60 °C | |
| Width | 25 mm | |
| Height | 20.8 mm | |
| Depth | 26.45 mm | |
| Dimensions (W × H × D) | 25 × 20.8 × 26.45 mm | |
| Weight | approx. 11 g | |
| Fire load | 0.216 MJ | |
| Electrical rating standard | IEC/EN 60664-1 | |
| Connector standard | IEC 61984 | |
| UL 1977 certification | E45171 | |
| UL 1059 certification | E45172 | |
| CB certification | NL-39756/A1 | |
| KEMA/KEUR certification | 71-121453 | |
| ABS marine approval | 19-HG1869876-PDA | |
| DNV marine approval | TAE000016Z | |
| RoHS compliance | Compliant, no exemption | |
| Manufacturer packaging unit | 50 pieces | |
| Packaging type | Box | |
| Country of origin | Poland | |
| GTIN / EAN | 4044918562997 | |
| Customs tariff number | 85366990990 | |
| ETIM classification | EC002638 | |
| Product group | 3 - Multi Connection System | |
| Connection system | WAGO MULTI CONNECTION SYSTEM (MCS) |
The WAGO 231-2105/026-000 is a 5-pole, 2-conductor pluggable female connector with integrated end plate, designed for industrial automation, control panels and modular electrical wiring. Its two conductor entries per pole make it particularly suitable for looping through power and data buses, allowing incoming and outgoing conductors to share the same electrical potential.
The connector features 5 individual poles with a 5 mm contact pitch. Each pole provides two conductor connection points, giving a total of 10 connection points across five electrical potentials. The two conductors connected to each pole remain electrically connected even when the plug is unmated from its corresponding connector.
The connector accommodates solid and fine-stranded copper conductors from 0.2–2.5 mm², equivalent to 24–12 AWG. Fine-stranded conductors fitted with insulated ferrules are supported from 0.25–1.5 mm², while uninsulated ferrules can be used from 0.25–2.5 mm². The recommended conductor strip length is 9–10 mm. Suitable solid and ferruled conductors can be inserted directly using Push-in CAGE CLAMP® technology.
The WAGO 231-2105/026-000 has an IEC rated current of 16 A and voltage ratings of 320 V under overvoltage category III, pollution degrees 2 and 3, and 630 V under overvoltage category II, pollution degree 2. Its rated impulse voltage is 4 kV. Under UL 1977, the connector is rated at 600 V and 20 A. The applicable electrical rating depends on the installation conditions, relevant standards and complete mating assembly.
The Push-in CAGE CLAMP® connection system enables quick and secure conductor termination without conventional screw terminals, allowing suitable solid and ferruled conductors to be inserted directly. The two conductor entries per pole support convenient loop-through wiring for power and data buses, maintaining continuity between connected conductors even when the plug is disconnected. The integrated end plate provides a complete connector housing, while coding fingers and anti-rotation protection help maintain the intended connector arrangement and mechanical positioning.
WAGO MCS MIDI Classic pluggable connectors are engineered to provide dependable spring pressure connection technology for industrial automation, electrical control equipment and modular wiring systems. The WAGO 231-2105/026-000 combines five electrical poles, ten conductor connection points, a 16 A IEC current rating and advanced Push-in CAGE CLAMP® technology with convenient bus loop-through functionality, making it a practical choice for efficient installation, reliable electrical connections and straightforward maintenance in professional industrial applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.