Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.96
The WAGO 231-2104/026-000 is a high-quality 4-pole, 2-conductor female pluggable connector from the established WAGO MCS MIDI Classic 231 Series. Designed for dependable electrical connections in industrial automation and electronic equipment, it combines Push-in CAGE CLAMP® spring connection technology, 5 mm contact spacing, a 16 A IEC rated current and a compact grey polyamide housing.
A key advantage of this connector is its two-conductor-per-pole design. Each of its four electrical poles provides two conductor connection points, creating eight conductor termination points in total. This allows incoming and outgoing conductors to share a common electrical potential, making the connector particularly suitable for loop-through power distribution, signal buses and modular electrical assemblies.
Unlike conventional single-conductor plugs, the WAGO 231-2104/026-000 can maintain the electrical continuity of a loop-through connection even when the female connector is separated from its mating header. Its integrated end plate, tool-operated spring connections and support for solid, fine-stranded and suitably ferruled conductors make it a practical solution for professional industrial wiring.
The WAGO 231-2104/026-000 uses Push-in CAGE CLAMP® spring-pressure technology to provide secure conductor termination. This screwless connection system applies spring force to the inserted conductor, maintaining electrical contact without relying on a manually tightened screw.
Suitable solid conductors and fine-stranded conductors fitted with appropriate ferrules can be inserted directly into the connector. An operating tool is used for conductor release and for termination procedures requiring spring actuation. This supports efficient assembly while accommodating different industrial wiring practices.
The connector accepts 0.2–2.5 mm² solid and fine-stranded conductors. For fine-stranded conductors fitted with insulated ferrules, the permitted range is 0.25–1.5 mm²; with uninsulated ferrules, it is 0.25–2.5 mm². Correct conductor selection and preparation are essential for dependable electrical performance.
The specified 9–10 mm stripping length helps ensure that the conductor is inserted to the correct depth. Installers should avoid damaging conductor strands during stripping and should verify that the conductor is securely retained after insertion.
One of the most useful characteristics of the WAGO 231-2104/026-000 is its two-conductor-per-pole configuration. Each of the four electrical potentials has two connection points, allowing an incoming conductor and an outgoing conductor to be connected to the same pole.
This arrangement supports loop-through wiring, where power or signal connections must continue between multiple devices. Instead of installing separate bridging conductors or additional distribution terminals, the connector can provide the necessary electrical continuity within its own connection structure.
A particularly important feature is that the bus connection remains intact even when the female connector is unmated from its corresponding header. This can be valuable in modular industrial equipment where electronic modules need to be disconnected while the through-wired circuit remains physically connected.
The four-pole design provides flexibility for multiple conductors and circuit arrangements. However, each pair of conductor entries belonging to the same pole is electrically common, while the four poles remain separate. The circuit layout must therefore be checked carefully to prevent unintended connections between different electrical potentials.
The 5 mm contact pitch makes the WAGO 231-2104/026-000 suitable for compact industrial connection systems. Its overall dimensions of 20 × 20.8 × 26.45 mm allow it to be integrated into appropriately designed electronic equipment and wiring assemblies.
The connector features an integrated end plate, providing a complete housing arrangement without requiring a separate end plate component. Its free-hanging / in-line configuration allows it to form part of a detachable cable assembly rather than being permanently soldered to a PCB.
The connector is specified as having no integrated plug-in locking mechanism. This is an important distinction from the related WAGO 231-2104/037-000, which features lateral locking levers. Engineers should select the appropriate variant according to the mechanical retention requirements of the installation.
The WAGO 231-2104/026-000 also includes variable coding and anti-rotation protection. Coding can help distinguish connection interfaces when used with compatible mating components, although the connector is not specified as having inherent mismating protection.
Its grey PA66 housing provides electrical insulation and mechanical support, while tin-plated copper-alloy contacts provide a conductive mating interface. The housing material has a UL 94 V-0 flammability classification, supporting use in suitably designed industrial electronic assemblies.
The connector has a 16 A IEC rated current and voltage ratings of 320 V under category III/3 and III/2 conditions and 630 V under category II/2 conditions. These ratings must be considered alongside the mating connector, conductor sizes, ambient conditions and overall equipment design.
The WAGO 231-2104/026-000 should not be treated as a load-breaking device unless the complete connector system is specifically approved for that function. Before mating, unmating or modifying wiring, electrical circuits should be safely isolated and verified as de-energised.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 320 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 4 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.2 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.2 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 5 mm | |
| Number of poles | 4 | |
| Material of contact surface | Tin | |
| Rated voltage | 320 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.2 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Manufacturer Part Number | 231-2104/026-000 | |
| Series | MCS MIDI Classic 231 Series | |
| Product type | 2-conductor female pluggable connector | |
| Connector gender | Female / socket | |
| Number of electrical potentials | 4 | |
| Conductor connection points per pole | 2 | |
| Total conductor connection points | 8 | |
| Number of connection levels | 1 | |
| Number of connection types | 1 | |
| Contact pitch | 5 mm / 0.197 inches | |
| Conductor connection technology | Push-in CAGE CLAMP® | |
| Actuation method | Operating tool | |
| Actuation direction | Parallel to conductor entry | |
| Conductor entry direction relative to mating direction | 0° | |
| Solid conductor cross-section | 0.2–2.5 mm² / 24–12 AWG | |
| Fine-stranded conductor cross-section | 0.2–2.5 mm² / 24–12 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 9–10 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 320 V | |
| Rated voltage (IEC, III/2) | 320 V | |
| Rated voltage (IEC, II/2) | 630 V | |
| Rated impulse voltage (IEC) | 4 kV | |
| Rated voltage (UL 1059, use group B) | 300 V | |
| Rated current (UL 1059, use group B) | 20 A | |
| Rated voltage (UL 1059, use group D) | 300 V | |
| Rated current (UL 1059, use group D) | 10 A | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL 1977) | 20 A | |
| Rated voltage (CSA, use group B) | 300 V | |
| Rated current (CSA, use group B) | 15 A | |
| Rated voltage (CSA, use group D) | 300 V | |
| Rated current (CSA, use group D) | 10 A | |
| Mounting arrangement | Free-hanging / in-line | |
| Plug-in locking | Without integrated locking | |
| Mismating protection | No | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Integrated end plate | Yes | |
| Loop-through wiring | Supported | |
| Contact material | Copper alloy | |
| Contact finish | Tin-plated | |
| Flammability classification | UL 94 V-0 | |
| Width | 20 mm | |
| Height | 20.8 mm | |
| Depth | 26.45 mm | |
| Dimensions (W × H × D) | 20 × 20.8 × 26.45 mm | |
| Standard packaging unit | 100 pieces | |
| Country of origin | Poland | |
| Relevant standards | IEC/EN 60664-1, UL 1059 and UL 1977, subject to applicable approval conditions |
The WAGO 231-2104/026-000 is a 4-pole, 2-conductor female pluggable connector designed for modular electrical connections in industrial automation, control equipment and electronic assemblies. Its two-conductor-per-pole arrangement is particularly useful for loop-through power and signal wiring.
The connector has 4 electrical poles with 2 conductor connection points per pole, providing 8 conductor connection points in total. Each pair of connection points shares one electrical potential, supporting loop-through wiring.
The connector accepts 0.2–2.5 mm² solid and fine-stranded conductors. Fine-stranded conductors with insulated ferrules are specified from 0.25–1.5 mm², while those with uninsulated ferrules are specified from 0.25–2.5 mm². The required stripping length is 9–10 mm.
The WAGO 231-2104/026-000 has an IEC rated current of 16 A. Its IEC voltage ratings are 320 V under category III/3 and III/2 conditions and 630 V under category II/2 conditions. The rated impulse voltage is 4 kV. Under UL 1977, the connector is rated at 600 V and 20 A.
Both products are 4-pole, 2-conductor female connectors from the WAGO MCS MIDI Classic 231 Series with 5 mm contact spacing and Push-in CAGE CLAMP® technology. The 231-2104/026-000 features an integrated end plate and no integrated plug-in locking mechanism, while the 231-2104/037-000 features lateral locking levers. The appropriate version should be selected according to the mechanical requirements of the installation.
WAGO MCS MIDI Classic connectors are designed for dependable, modular electrical interconnections in industrial automation, machinery and electronic equipment. The WAGO 231-2104/026-000 combines four electrical poles, eight conductor connection points, Push-in CAGE CLAMP® technology and an integrated end plate to provide a practical solution for loop-through wiring and detachable industrial electrical connections.
Manufacturer reference: WAGO 231-2104/026-000 Official Product Information.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.