Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£4.07
The WAGO 231-208/008-000 is an 8-pole, 1-conductor female pluggable connector with snap-in mounting feet from the WAGO MCS MIDI Classic 231 Series. Designed for industrial electrical and electronic equipment, it combines 7.5 mm pin spacing, CAGE CLAMP® spring connection technology and a panel-mounting arrangement for dependable, detachable electrical connections.
The connector accepts solid and fine-stranded copper conductors from 0.08 to 2.5 mm² (28–12 AWG), providing eight independent conductor connections within a single housing. Its CAGE CLAMP® technology enables secure, screwless conductor termination using an operating tool, while vertical and horizontal actuation supports convenient cable pre-assembly and on-unit wiring. Integrated test ports and coding fingers provide additional functionality for installation and maintenance.
With a 16 A IEC rated current, IEC rated voltages of up to 1,000 V under the applicable insulation coordination conditions, and snap-in mounting feet suitable for 0.6–1.2 mm panel thicknesses, the WAGO 231-208/008-000 is particularly useful for industrial control panels, machine interfaces and modular electronic assemblies. Its grey PA66 insulating housing and tin-plated copper-alloy contacts support reliable electrical integration in demanding applications.
The WAGO MCS MIDI Classic connector system provides a practical solution for modular electrical wiring in industrial equipment. The 231-208/008-000 combines CAGE CLAMP® spring termination with an eight-pole female mating interface and snap-in mounting feet. This design allows the connector to be integrated into suitable panel openings while providing convenient access to detachable electrical connections. Integrated test ports simplify commissioning and troubleshooting, and coding fingers support controlled mating arrangements.
With a 7.5 mm pitch, 16 A IEC rated current and conductor compatibility up to 2.5 mm², the connector is suitable for industrial control, signalling and appropriately rated power connections. The selected male connector must match its mechanical configuration, contact spacing and electrical ratings. As a connector without breaking capacity under IEC/EN 61984, it must not be connected or disconnected while live or under load, and the installation must ensure accessible unmated male contacts are not energised.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 7.5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 8 | |
| Material of contact surface | Tin | |
| Rated voltage | 630 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic / 231 Series | |
| Manufacturer part number | 231-208/008-000 | |
| Product type | 1-conductor female pluggable connector with snap-in mounting feet | |
| Connector gender | Female | |
| Number of potentials | 8 | |
| Number of clamping points | 8 | |
| Number of levels | 1 | |
| Conductors per pole | 1 | |
| Pin spacing | 7.5 mm | |
| Connection technology | CAGE CLAMP® | |
| Actuation method | Operating tool | |
| Conductor entry orientation | 180° relative to mating direction | |
| Mounting type | Snap-in mounting feet / panel mounting | |
| Permissible panel sheet thickness | 0.6–1.2 mm | |
| Plug-in connection locking | Without locking mechanism | |
| Rated current (IEC) | 16 A | |
| Rated voltage (III / 3) | 500 V | |
| Rated voltage (III / 2) | 630 V | |
| Rated voltage (II / 2) | 1,000 V | |
| Rated impulse voltage | 6 kV | |
| Rated voltage (UL) | 600 V | |
| Rated current (UL) | 15 A | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Conductor stripping length | 8–9 mm | |
| Width | 59 mm | |
| Overall height | 18.8 mm | |
| Height above mounting surface | 14.3 mm | |
| Depth | 26.45 mm | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Insulating housing material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Weight | Approximately 16.8 g | |
| Integrated test ports | Yes | |
| Coding fingers | Yes | |
| Country of origin | Germany | |
| Standard packaging unit | 25 pieces | |
| GTIN | 4044918374880 | |
| Applicable connector standards | IEC/EN 61984, UL 1059 and UL 1977 |
The WAGO 231-208/008-000 is an 8-pole female pluggable connector with snap-in mounting feet, designed for detachable electrical connections in industrial control panels, automation equipment and electronic assemblies.
The snap-in mounting feet allow the connector to be mounted in a suitable panel opening. The connector is designed for panel sheet thicknesses of 0.6–1.2 mm, helping simplify mechanical installation without requiring a conventional screw-mounted flange.
The connector accepts solid and fine-stranded copper conductors from 0.08 to 2.5 mm² (28–12 AWG). The recommended stripping length is 8–9 mm, and conductors are secured using CAGE CLAMP® spring connection technology.
The connector has an IEC rated current of 16 A and IEC rated voltages of 500 V for category III/3, 630 V for category III/2 and 1,000 V for category II/2. Its rated impulse voltage is 6 kV, and its UL ratings are 600 V and 15 A.
The 231-208/008-000 features snap-in mounting feet for panel installation but does not have a separate plug-in connection locking mechanism. It includes coding fingers and integrated test ports, and must be paired with a compatible eight-pole male connector.
WAGO MCS MIDI Classic pluggable connectors combine dependable spring-clamp conductor termination with modular electrical connectivity for industrial automation, machine building and electronic control equipment. The 231-208/008-000 provides an eight-pole female connection interface with snap-in mounting feet, integrated test ports and CAGE CLAMP® technology to support efficient panel installation, reliable wiring and straightforward equipment maintenance.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.