Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.43
The WAGO 231-207/026-000 is a reliable 7-pole female pluggable connector from the WAGO MCS MIDI Classic 231 Series, designed for secure electrical connections in industrial automation, control panels, machinery and electronic equipment. Featuring CAGE CLAMP® spring pressure connection technology, it provides dependable conductor termination without conventional screw tightening.
With a 7.5 mm contact pitch, 16 A IEC rated current and compatibility with conductors from 0.08 to 2.5 mm², the connector provides seven independent electrical connection points. Its spring pressure termination supports solid and fine-stranded conductors, making it suitable for modular power distribution and industrial control wiring.
The WAGO 231-207/026-000 features a grey polyamide PA66 housing, tin-plated copper alloy contacts, integrated test ports and coding fingers. Measuring 51.5 × 14.3 × 26.45 mm, it provides a compact, detachable connection interface for compatible WAGO male connectors, supporting efficient cable pre-assembly, installation and maintenance.
The WAGO 231-207/026-000 uses CAGE CLAMP® spring pressure connection technology to establish dependable electrical contact with correctly prepared conductors. Its spring mechanism maintains contact pressure without conventional screw tightening, helping simplify wiring and reduce maintenance associated with screw terminal connections. The connector supports solid and fine-stranded conductors, while operating-tool access enables convenient cable pre-assembly and equipment installation.
The seven-pole pluggable interface allows multiple electrical circuits to be connected or disconnected as a single compatible assembly during de-energised servicing. Integrated test ports support electrical measurements, and coding fingers help differentiate connector configurations. This variant does not incorporate an integral locking mechanism, so the mating arrangement and mechanical retention requirements must be considered during installation. The connector must not be connected or disconnected while energised or under load unless the complete system is specifically approved for that operation.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 7.5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 7 | |
| Material of contact surface | Tin | |
| Rated voltage | 630 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | 231 Series – MCS MIDI Classic | |
| Model | 231-207/026-000 | |
| Product type | Female pluggable connector | |
| Connector configuration | 1-conductor female connector, 7-pole | |
| Number of potentials | 7 | |
| Total number of connection points | 7 | |
| Number of connection types | 1 | |
| Number of levels | 1 | |
| Contact arrangement | Single row | |
| Pin spacing | 7.5 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, III/3) | 500 V | |
| Rated voltage (IEC, III/2) | 630 V | |
| Rated voltage (IEC, II/2) | 1000 V | |
| Rated impulse withstand voltage (IEC) | 6 kV | |
| Rated current (UL) | 15 A | |
| Rated voltage (UL) | Up to 600 V, subject to the applicable approval and use group | |
| Conductor connection technology | CAGE CLAMP® | |
| Actuation type | Operating tool | |
| Actuation arrangement | Vertical and horizontal access | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor strip length | 8–9 mm | |
| Conductor entry direction relative to mating direction | 0° | |
| Connector gender | Female | |
| Connection arrangement | Pluggable | |
| Mounting arrangement | Free-hanging / in-line connection | |
| Locking of plug-in connection | Without integral locking | |
| Integrated test ports | Yes | |
| Coding fingers | Yes | |
| Integral mismating protection | No | |
| Insulation material group | I | |
| Flammability classification | UL 94 V-0 | |
| Contact material | Copper alloy | |
| Contact plating | Tin-plated | |
| Clamping spring material | Chrome-nickel spring steel (CrNi) | |
| Specified temperature range | −60 to +85 °C | |
| Width | 51.5 mm | |
| Height | 14.3 mm | |
| Depth | 26.45 mm | |
| Dimensions (W × H × D) | 51.5 × 14.3 × 26.45 mm | |
| Weight | 14.67 g | |
| Fire load | 0.238 MJ | |
| GTIN | 4044918344302 | |
| Country of origin | Germany | |
| Applicable connector standards | IEC/EN 61984; applicable UL 1059 and UL 1977 approvals |
The WAGO 231-207/026-000 is a 7-pole female pluggable connector used to connect electrical conductors to compatible male connectors in industrial control panels, automation equipment, machinery and electronic systems.
The connector has a 16 A IEC rated current and IEC rated voltages of 500 V under category III/3, 630 V under category III/2 and 1000 V under category II/2. It also has a 6 kV rated impulse withstand voltage. The applicable rating of the complete assembly depends on the mating component and installation conditions.
The connector accepts suitable solid and fine-stranded conductors from 0.08 to 2.5 mm² (28–12 AWG). Fine-stranded conductors with insulated ferrules are supported from 0.25 to 1.5 mm², while those with uninsulated ferrules are supported from 0.25 to 2.5 mm². The specified stripping length is 8–9 mm.
No. The 231-207/026-000 is specified as a female pluggable connector without an integral locking mechanism. It includes integrated test ports and coding fingers, but the mechanical retention requirements of the complete mating assembly should be checked before installation.
The WAGO 231-207/026-000 measures 51.5 × 14.3 × 26.45 mm (width × height × depth), weighs approximately 14.67 g and has a specified temperature range of −60 to +85 °C. Its housing is manufactured from grey polyamide PA66.
WAGO MCS MIDI Classic connectors provide established pluggable electrical connection technology for industrial automation, machine building and electrical control systems. The WAGO 231-207/026-000 combines seven-pole connectivity, a 16 A IEC current rating, CAGE CLAMP® spring pressure termination and integrated test facilities to support dependable, maintainable wiring in compatible industrial connector assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.