Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£4.14
The WAGO 231-206/027-000 is a 6-pole, 1-conductor female pluggable connector with clamping collar from the WAGO MCS MIDI Classic 231 Series. Designed for dependable electrical connections in industrial automation, machinery and electronic control equipment, it combines 7.5 mm pin spacing, CAGE CLAMP® spring connection technology and a secure pluggable interface for modular wiring installations.
The connector accommodates solid and fine-stranded copper conductors from 0.08 to 2.5 mm² (28–12 AWG). Its CAGE CLAMP® connection system allows conductors to be terminated without conventional screw terminals, while vertical and horizontal actuation enables convenient cable pre-assembly and wiring directly on equipment. The integrated clamping collar and mounting arrangement distinguish this variant from standard female connector configurations.
With a 16 A IEC rated current, rated voltage up to 1,000 V under IEC overvoltage category II, pollution degree 2 conditions, and integrated test ports and coding fingers, the WAGO 231-206/027-000 offers a practical solution for control, signal and appropriately rated power connections. Its grey polyamide housing, tin-plated copper-alloy contacts and detachable design support reliable electrical integration and efficient maintenance.
The WAGO MCS MIDI Classic connector system provides a dependable solution for detachable electrical interfaces in industrial electronic equipment. The 231-206/027-000 combines CAGE CLAMP® spring termination with a six-pole female mating interface and a clamping collar configuration. This arrangement supports organised conductor wiring, secure connector installation and convenient equipment servicing without conventional screw-terminal connections.
With 7.5 mm pin spacing, a 16 A IEC rated current and support for conductors up to 2.5 mm², the connector is suitable for industrial control, signalling and appropriately rated power circuits. The selected male connector must match the mechanical arrangement, coding and electrical requirements. As a connector without breaking capacity under IEC/EN 61984, it must not be connected or disconnected while live or under load, and the installation must prevent accessible unmated male contacts from remaining energised.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 7.5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 6 | |
| Material of contact surface | Tin | |
| Rated voltage | 630 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Series | MCS MIDI Classic / 231 Series | |
| Manufacturer part number | 231-206/027-000 | |
| Product type | 1-conductor female pluggable connector with clamping collar | |
| Connector gender | Female | |
| Number of potentials | 6 | |
| Number of clamping points | 6 | |
| Number of levels | 1 | |
| Conductors per pole | 1 | |
| Pin spacing | 7.5 mm | |
| Connection technology | CAGE CLAMP® | |
| Actuation method | Operating tool | |
| Conductor entry orientation | 180° relative to the mating interface | |
| Rated current (IEC) | 16 A | |
| Maximum rated voltage (IEC, II/2) | 1,000 V | |
| Rated impulse voltage (IEC, II/2) | 6 kV | |
| Rated voltage (UL) | 600 V | |
| Rated current (UL) | 15 A | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 8–9 mm | |
| Width | 57.3 mm | |
| Height | 14.3 mm | |
| Depth | 26.45 mm | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Clamping spring material | Chrome-nickel spring steel | |
| Insulating housing material | Polyamide 66 (PA66) | |
| Flammability classification | UL 94 V-0 | |
| Integrated test ports | Yes | |
| Coding fingers | Yes | |
| Approximate weight | 13.54 g | |
| Country of origin | Germany | |
| Standard packaging unit | 25 pieces | |
| GTIN | 4044918367110 | |
| Applicable connector standards | IEC/EN 61984, UL 1059 and UL 1977 |
The WAGO 231-206/027-000 is a 6-pole female pluggable connector with a clamping collar, used for detachable electrical connections in industrial control, automation and electronic equipment.
The 231-206/027-000 is the clamping collar variant, incorporating a mounting arrangement that distinguishes it from the standard 231-206/026-000 female connector. Both belong to the WAGO MCS MIDI Classic 231 Series, but their mechanical configurations should be considered when selecting mating components and planning installation.
The connector accepts solid and fine-stranded copper conductors from 0.08 to 2.5 mm² (28–12 AWG). The recommended stripping length is 8–9 mm, and conductors are secured using CAGE CLAMP® spring connection technology.
The connector has an IEC rated current of 16 A and a maximum IEC rated voltage of 1,000 V under overvoltage category II, pollution degree 2 conditions. Its UL ratings are 600 V and 15 A.
Yes. The connector features integrated test ports for electrical measurements and coding fingers to help establish correct mating arrangements. The connector should be paired with a compatible six-pole male component with matching mechanical and electrical characteristics.
WAGO MCS MIDI Classic pluggable connectors combine dependable spring-clamp conductor termination with modular electrical connectivity for industrial automation, machine building and electronic control equipment. The 231-206/027-000 provides a six-pole female interface with a clamping collar, integrated test ports and coding features to support reliable wiring, convenient installation and efficient maintenance.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.