Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.11
The WAGO 231-206/008-000 is a high-quality 6-pole female pluggable connector with snap-in mounting feet, designed for reliable electrical connections in industrial automation, control panels and electronic equipment. Part of the established WAGO MCS MIDI Classic 231 series, this connector combines proven CAGE CLAMP® spring pressure connection technology with practical panel-mounting features for secure, maintainable electrical installations.
Featuring a 7.5 mm contact pitch, 16 A IEC rated current and conductor compatibility from 0.08 to 2.5 mm², the WAGO 231-206/008-000 provides a versatile connection solution for industrial wiring. Its six independent electrical potentials allow multiple circuits to be connected through a single pluggable interface, while the integrated snap-in mounting feet enable installation into suitable equipment panels and enclosures.
The connector incorporates tool-operated CAGE CLAMP® terminals, eliminating the need for conventional terminal screws. Additional features include integrated test ports, coding fingers and anti-rotation protection. Its grey polyamide housing, tin-plated copper alloy contacts and compact construction make it particularly suitable for OEM manufacturers, electrical panel builders and industrial automation engineers requiring dependable pluggable connections.
The WAGO 231-206/008-000 combines CAGE CLAMP® spring pressure connection technology with integrated snap-in mounting feet. CAGE CLAMP® terminals use a spring mechanism to maintain consistent contact pressure on connected conductors, helping provide reliable electrical connections without conventional terminal screws. This makes the connector suitable for industrial installations where dependable conductor termination and straightforward wiring are essential.
The connector accommodates solid and fine-stranded conductors from 0.08 to 2.5 mm², including appropriately sized ferruled conductors. Its spring clamps can be operated both parallel and perpendicular to the conductor entry direction using a suitable tool, allowing convenient cable pre-assembly and on-unit wiring. This flexibility is particularly useful when working within compact control panels or industrial equipment enclosures.
The integrated snap-in mounting feet allow installation into suitable panel openings with sheet thicknesses from 0.6 to 1.2 mm. The specified mounting-hole diameter is 3.5 mm with a positive tolerance of 0.1 mm. This provides a practical mounting arrangement for applications requiring a mechanically supported pluggable connection interface.
Additional features include integrated test ports, coding fingers and anti-rotation protection. The test ports support electrical measurements, while coding features help differentiate compatible connector combinations. The connector is intended for use with an appropriately matched male counterpart, and the complete connection assembly must be checked for electrical and mechanical compatibility before installation.
The WAGO 231-206/008-000 is part of a connector system without independent load-breaking capacity under IEC/EN 61984. It must not be connected or disconnected while live or under load. Equipment should be safely isolated before mating or separating the connector, and accessible male contacts must not remain energised when unmated.
Tick the specs you need, then view products that match.
| Current | 16 A | |
|---|---|---|
| Voltage | 630 V | |
| Product Series | WAGO 231 | |
| Rated surge voltage | 6 kV | |
| Number of plug-in contact rows | 1 | |
| Connectable cable type | Tubular cable | |
| Flammability class of insulation material according to UL 94 | V0 | |
| Operating temperature | -60 – 85 °C | |
| Rated current In | 16 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.08 – 2.5 mm² | |
| Degree of protection (IP), mounted | IP20 | |
| Material insulation body | Thermoplastic | |
| Coating housing | Uncoated | |
| Connectable conductor cross section multi-wired | 0.08 – 2.5 mm² | |
| Housing colour | Grey | |
| Modular spacing contacts | 7.5 mm | |
| Angle contact/conductor connection | 180° (horizontal) | |
| Contact type | Bus | |
| Material contact | Other copper alloys | |
| Type of electric connection | Spring clamp connection | |
| Housing material | Plastic | |
| Type of connection | Printed circuit board to cable | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.25 – 1.5 mm² | |
| Modular spacing connections | 7.5 mm | |
| Number of poles | 6 | |
| Material of contact surface | Tin | |
| Rated voltage | 630 V | |
| Pollution degree | 2 | |
| Connectable conductor cross section solid-core | 0.08 – 2.5 mm² | |
| Overvoltage category | III | |
| Manufacturer | WAGO | |
| Product family | MCS MIDI Classic | |
| Series | 231 | |
| Manufacturer part number | 231-206/008-000 | |
| Product type | Female pluggable connector with snap-in mounting feet | |
| Connector gender | Female | |
| Number of electrical potentials | 6 | |
| Total clamping points | 6 | |
| Number of connection types | 1 | |
| Number of levels | 1 | |
| Connections per pole | 1 | |
| Contact pitch | 7.5 mm | |
| Rated current (IEC) | 16 A | |
| Rated voltage (IEC, II/2) | 1000 V | |
| Rated voltage (UL 1977) | 600 V | |
| Rated current (UL) | 15 A, subject to the applicable approval and use group | |
| Connection technology | CAGE CLAMP® | |
| Termination type | Screwless spring pressure connection | |
| Actuation method | Operating tool | |
| Actuation direction 1 | Parallel to conductor entry | |
| Actuation direction 2 | Perpendicular to conductor entry | |
| Solid conductor cross-section | 0.08–2.5 mm² | |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² | |
| Conductor size | 28–12 AWG | |
| Fine-stranded conductor with insulated ferrule | 0.25–1.5 mm² | |
| Fine-stranded conductor with uninsulated ferrule | 0.25–2.5 mm² | |
| Conductor stripping length | 8–9 mm | |
| Conductor entry direction relative to mating direction | 0° | |
| Mounting type | Snap-in mounting feet / panel mounting | |
| Compatible panel thickness | 0.6–1.2 mm | |
| Mounting-hole diameter | 3.5 mm (+0.1 mm tolerance) | |
| Variable coding | Yes | |
| Anti-rotation protection | Yes | |
| Mismating protection | No | |
| Integrated plug-in locking mechanism | None | |
| Integrated test ports | Yes | |
| Clamping spring material | Chrome-nickel spring steel (CrNi) | |
| Contact material | Copper alloy | |
| Contact plating | Tin | |
| Material group | I | |
| Flammability classification | UL94 V0 | |
| Temperature limit range | −60 to +85 °C | |
| Width | 44 mm | |
| Height | 18.8 mm | |
| Height from mounting surface | 14.3 mm | |
| Depth | 26.45 mm | |
| Weight | approx. 12.6 g | |
| Fire load | 0.207 MJ | |
| Relevant standards | IEC/EN 61984, UL 1059 and UL 1977 | |
| Country of origin | Germany | |
| GTIN / EAN | 4044918374828 |
The WAGO 231-206/008-000 is a 6-pole female pluggable connector with CAGE CLAMP® spring pressure terminals and snap-in mounting feet. It is designed for reliable electrical connections in industrial control panels, automation equipment and panel-mounted connector assemblies.
The connector accepts solid and fine-stranded conductors from 0.08 to 2.5 mm², equivalent to 28–12 AWG. Fine-stranded conductors with insulated ferrules from 0.25 to 1.5 mm² and uninsulated ferrules from 0.25 to 2.5 mm² are also supported. The specified stripping length is 8–9 mm.
The WAGO 231-206/008-000 has an IEC rated current of 16 A and an IEC rated voltage of 1000 V under overvoltage category II, pollution degree 2 conditions. UL ratings include 600 V under UL 1977, with the applicable current rating depending on the approval and installation conditions.
The connector features integrated snap-in mounting feet for installation into suitable equipment panels. It supports panel thicknesses from 0.6 to 1.2 mm and uses mounting holes with a specified diameter of 3.5 mm (+0.1 mm tolerance).
The connector measures 44 mm wide, 18.8 mm high and 26.45 mm deep. Its height from the mounting surface is 14.3 mm, and its approximate weight is 12.6 g. The housing is manufactured from grey polyamide 66 with a UL94 V0 flammability classification.
WAGO MCS MIDI Classic connectors are designed to provide dependable pluggable electrical connections for industrial automation, electrical control panels and OEM equipment manufacturing. The WAGO 231-206/008-000 combines proven CAGE CLAMP® spring pressure technology, a practical six-pole configuration and convenient snap-in panel mounting to deliver reliable electrical connectivity in compatible industrial installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.