Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
CR25AD1 Ilme Adaptor plate Size 57.27
ILME CR25AD1 is a size 57.27 plastic adaptor plate designed to mount one 25-pole D-SUB connector plus ground within compatible ILME industrial connector enclosures.
£0.87
Why Choose the ILME CR25AD1 Adaptor Plate?
The ILME CR25AD1 is a purpose-designed adaptor plate for installing one 25-pole D-SUB connector plus ground within a compatible ILME industrial connector enclosure. Designed for size 57.27 housings, it enables established D-SUB connectivity to be integrated into ILME's robust rectangular connector enclosure system.
The CR25AD1 provides a single rectangular D-SUB mounting aperture and measures approximately 64.5 × 34.5 mm. The plate is manufactured from plastic and is designed so that a pre-wired D-SUB connector can be introduced from the rear, simplifying integration with electronic control and programming equipment.
For installation in compatible bulkhead housings, the D-SUB connector is mounted on the side of the plate marked “A”; when installed in a compatible hood, it is mounted on the side marked “T”. The D-SUB connector itself is not included, allowing the appropriate 25-pole component to be selected separately for the application.
Key Advantages
- Allows one 25-pole D-SUB connector plus ground to be integrated into an ILME enclosure.
- Designed specifically for size 57.27 industrial connector housings.
- Supports pre-wired D-SUB connectors inserted from the rear of the adaptor plate.
- Suitable for compatible bulkhead housings and hoods.
- Clearly marked mounting orientations simplify correct assembly.
- Plastic construction provides a lightweight dedicated mounting interface.
- Ideal for industrial programming, electronic control and diagnostic connections.
Key Features
- ILME D-SUB adaptor plate.
- Designed for one 25-pole D-SUB insert.
- Supports a 25-pole + ground D-SUB configuration.
- Size 57.27 enclosure compatibility.
- One rectangular aperture.
- Approximate plate dimensions of 64.5 × 34.5 mm.
- Plastic adaptor plate construction.
- Mounting holes suitable for M3 screws.
- Separate orientation markings for bulkhead housing and hood installation.
- D-SUB connector is not included.
Reliable D-SUB Integration for Industrial Equipment
Industrial machines and control equipment frequently require connections to programming devices, electronic controllers, diagnostic equipment and other low-level signal interfaces. The CR25AD1 provides a dedicated means of incorporating a familiar 25-pole D-SUB connection into a compatible ILME heavy-duty enclosure rather than leaving the electronic connector without a suitable industrial mounting interface.
The plate is designed for both bulkhead-housing and hood applications. ILME identifies the correct orientation using the “A” marking for bulkhead housing installation and the “T” marking for hood installation, helping installers position the D-SUB connector correctly during assembly.
Typical Applications
- Industrial 25-pole D-SUB connector interfaces.
- Machine programming connections.
- Electronic control equipment.
- Diagnostic and commissioning interfaces.
- Industrial automation systems.
- Test and measurement equipment.
- Machine tools and production machinery.
- Electrical control panels and cabinets.
Technical Specifications
Tick the specs you need, then view products that match.
| IP Rating | IP65 | |
|---|---|---|
| Frame Size | 57.27 | |
| Housing Material | Thermoplastic | |
| Product Series | ILME C-Type | |
| Device Type | Accessory | |
| HS Code | 85389099 | |
| Country of Manufacture | Italy | |
| Manufacturer | ILME | |
| Model | CR25AD1 | |
| Alternative part designation | CR 25 AD1 | |
| Product type | D-SUB adaptor plate | |
| Application | Integration of D-SUB connectors into industrial connector enclosures | |
| Enclosure size | 57.27 | |
| D-SUB configuration | 25 poles + ground | |
| Number of D-SUB connectors | 1 | |
| Number of apertures | 1 | |
| Aperture shape | Rectangular | |
| Plate length | 64.5 mm | |
| Plate width | 34.5 mm | |
| Reference mounting dimension | 57 mm | |
| Mounting hole diameter | 3.2 mm | |
| Recommended fixing | M3 screws with nuts and washers | |
| Material | Plastic | |
| Flammability class | UL 94 HB | |
| Protection rating when mounted | IP65 | |
| Net weight | 0.012 kg | |
| D-SUB connector included | No | |
| EAN | 8015747037723 | |
| eCl@ss | 27440201 | |
| Customs tariff code | 85389099 |
Frequently Asked Questions
What is the ILME CR25AD1 used for?
The CR25AD1 is an adaptor plate for installing one 25-pole D-SUB connector plus ground in a compatible ILME size 57.27 industrial connector enclosure.
What enclosure size is the CR25AD1 designed for?
The ILME CR25AD1 is designed for compatible size 57.27 connector enclosures.
How many D-SUB connectors can the CR25AD1 accommodate?
The CR25AD1 accommodates one 25-pole D-SUB connector. For applications requiring two 25-pole D-SUB connectors in size 57.27, ILME offers the separate CR25AD2 adaptor plate.
Is the D-SUB connector supplied with the CR25AD1?
No. The 25-pole D-SUB connector is not included; the CR25AD1 provides the mounting interface for a suitable separately selected D-SUB connector.
Can the CR25AD1 be installed in both a bulkhead housing and a hood?
Yes. The plate supports compatible bulkhead housing and hood installations. The D-SUB connector should be fitted on the side marked “A” for bulkhead housing installation and on the side marked “T” for hood installation.
Trusted by Industrial Engineers Worldwide
ILME adaptor plates give machine builders, panel builders and automation engineers a practical way to integrate standard D-SUB electronic interfaces into robust industrial connector enclosure systems for control, programming, diagnostics and test applications.
