Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
CCTP10 Ilme Turret head for 10amp crimps
ILME CCTP10 is a precision turret head and contact positioner for male and female 10 A crimp contacts from 0.14–2.5 mm², designed for use with the ILME CCPZ MIL crimping tool.
£220.80
Why Choose the ILME CCTP10 Turret Head for 10 A Crimp Contacts?
The ILME CCTP10 is a precision turret head and contact positioner for 10 A crimp contacts, designed for use with the ILME CCPZ MIL manual crimping tool. It accurately positions compatible male and female contacts within the crimping tool, helping ensure consistent conductor alignment and reliable crimp termination in professional industrial connector assembly.
Designed for ILME 10 A CD series contacts and compatible 10 A contacts used across suitable ILME connector inserts and modules, the CCTP10 supports conductor cross-sections from 0.14–2.5 mm², corresponding to approximately AWG 26–14. The turret incorporates selectable positioning for male and female contacts, allowing the crimping tool to be configured correctly for the contact being terminated.
The CCTP10 is an interchangeable and essential positioning accessory for the ILME CCPZ MIL / Daniels AF8 crimping tool. The positioning system conforms with MIL-C-22520/1 requirements and works with the tool's adjustable crimping depth to provide controlled, repeatable termination of ILME 10 A crimp contacts.
Key Advantages
- Precision turret head for ILME 10 A crimp contacts.
- Designed for use with the ILME CCPZ MIL / Daniels AF8 crimping tool.
- Supports conductor sizes from 0.14–2.5 mm².
- Suitable for both male and female 10 A contacts.
- Accurately positions contacts at the correct location for crimping.
- Interchangeable design allows the crimping tool to be configured for the required ILME contact series.
Key Features
- ILME CCTP Series contact positioning turret.
- Designed specifically for 10 A contacts.
- 0.14–2.5 mm² conductor range.
- Supports approximately AWG 26–14 conductors.
- Compatible with male and female contacts.
- Contact selector identifies male, female and stop positions.
- Works with the adjustable crimping depth settings of the CCPZ MIL tool.
- Positioning system conforms with MIL-C-22520/1.
Precision Positioning for Reliable Crimp Terminations
A turret head is a critical part of a controlled crimping system because it holds the contact at the correct position relative to the crimping indenters. The ILME CCTP10 enables the CCPZ MIL tool to accurately position compatible 10 A contacts so that the conductor and contact barrel receive the intended crimp.
The CCTP10 accommodates conductor sizes from 0.14–2.5 mm² and provides selectable settings according to contact type and conductor cross-section. When used with the appropriate ILME contacts and correctly adjusted CCPZ MIL crimping tool, it supports repeatable terminations for industrial connector assemblies.
Typical Applications
- Assembly of ILME 10 A crimp contacts.
- ILME CD and CDD multipole connector inserts.
- Compatible ILME MIXO modular connectors.
- Compatible ILME CX mixed connector inserts.
- Industrial control panel and machinery wiring.
- OEM connector harness and cable assembly.
Technical Specifications
Tick the specs you need, then view products that match.
| Connection | Crimp | |
|---|---|---|
| Device Type | Contact | |
| HS Code | 82032000 | |
| Country of Manufacture | Italy | |
| Manufacturer | ILME | |
| Model | CCTP10 | |
| Alternative part number | CCTP 10 | |
| Product type | Turret head / contact positioner | |
| Contact rating | 10 A | |
| Contact compatibility | Male and female 10 A crimp contacts | |
| Contact series | ILME CD series | |
| Conductor cross-section range | 0.14–2.5 mm² | |
| Conductor range | AWG 26–14 | |
| Compatible crimping tool | ILME CCPZ MIL / Daniels AF8 | |
| Applicable insert families | CD, CDD, MIXO, CX and other compatible 10 A contact applications | |
| Standard | MIL-C-22520/1 | |
| Weight | approx. 0.11 kg | |
| Barcode | 8015747012881 |
Frequently Asked Questions
What is the ILME CCTP10 used for?
The ILME CCTP10 is a turret head and contact positioner used to accurately position compatible 10 A male and female crimp contacts when terminating them with the ILME CCPZ MIL crimping tool.
Which crimping tool is compatible with the CCTP10?
The CCTP10 is designed for the ILME CCPZ MIL manual crimping tool, based on the Daniels AF8 crimping tool system.
What conductor sizes does the ILME CCTP10 support?
The CCTP10 supports compatible 10 A contacts for conductor cross-sections from 0.14–2.5 mm², corresponding to approximately AWG 26–14.
Can the CCTP10 be used with male and female contacts?
Yes. The turret head is designed for compatible male and female ILME 10 A contacts and incorporates selectable positioning for the appropriate contact type.
Which ILME connector ranges use CCTP10-compatible contacts?
The CCTP10 is intended for ILME 10 A contacts used with compatible connector families including CD, CDD, MIXO and CX applications.
Professional Tooling for ILME Industrial Connectors
ILME CCTP positioning turrets form part of the professional crimping system for ILME industrial connectors, helping installers and panel builders achieve accurate and repeatable crimp terminations across compatible contact and conductor sizes.
