862-1525 Wago 4-Cond. Chassis-Mount Terminal Strip, 1 Snap-In Foot At Pos. 24 Pe-N-L1-L2-L3 Black

862-1525 Wago 4-Cond. Chassis-Mount Terminal Strip, 1 Snap-In Foot At Pos. 24 Pe-N-L1-L2-L3 Black

SKU: 862-1525MPN: 862-1525
Price
List Price £2.56 ex VAT
Your Price (ex VAT) Save 15%
£2.18 15% OFF
You save £0.384 per unit
Manufacturer Lead Time Please contact us for a delivery time before you order
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £2.18
Trade pricing is personalised to your account

Manufacturer Lead Time

Sold in packs of 200

£2.18

WAGO 862-1525 – 5-Pole Marked Chassis-Mount Terminal Strip, 32 A, 500 V, 4 mm²

The WAGO 862-1525 is a professional 5-pole, 4-conductor chassis-mount terminal strip designed for organised electrical connections in control panels, machinery, lighting equipment and electrical enclosures. Featuring Push-in CAGE CLAMP® spring-pressure connection technology, this black terminal strip combines convenient conductor termination with a compact snap-in mounting design.

With four conductor connection points per pole, the WAGO 862-1525 provides 20 conductor connection points across five electrically separate poles. Each group of four connection points is electrically common, allowing compatible conductors to be joined or distributed within a single pole.

A distinguishing feature of this model is its factory-applied PE-N-L1-L2-L3 marking, providing clear identification for electrical installation and maintenance. However, the product is explicitly specified without an integrated ground contact. The PE marking does not make the corresponding pole a dedicated protective-earth terminal or provide an automatic earth connection to the chassis.

The WAGO 862-1525 features snap-in mounting feet at positions 2 and 4, allowing installation into a suitably prepared chassis or mounting panel. This arrangement is particularly useful for electrical equipment manufacturing and repeatable panel assembly.

Rated at 32 A and 500 V under the specified IEC/EN conditions, the terminal strip supports suitable solid, stranded and fine-stranded copper conductors from 0.5–4 mm². Its compact dimensions of 60 mm wide and 35 mm deep make it suitable for space-conscious electrical equipment designs.

Key Advantages

  • Five electrically separate poles: Provides five distinct connection groups within one terminal strip.
  • 20 conductor connection points: Four connections per pole support efficient conductor distribution.
  • PE-N-L1-L2-L3 marking: Provides a clearly identified connection layout for appropriately designed electrical equipment.
  • Push-in CAGE CLAMP® technology: Provides spring-pressure conductor connections without conventional terminal clamping screws.
  • Snap-in chassis mounting: Integrated mounting feet simplify installation into compatible panels.
  • Mounting feet at positions 2 and 4: Provides a defined fixing arrangement for equipment manufacturers.
  • 32 A rated current: Suitable for circuits designed within the manufacturer's specified rating.
  • 500 V rated voltage: Supports a broad range of compatible electrical equipment applications.
  • 6 kV rated impulse voltage: Specified for overvoltage category III and pollution degree 3.
  • 4 mm² nominal conductor capacity: Supports common electrical equipment wiring sizes.
  • Multiple conductor constructions: Accepts suitable solid, stranded and fine-stranded copper conductors.
  • Direct push-in termination: Allows suitably prepared conductors to be connected quickly.
  • Integrated push-button actuation: Enables controlled opening of the spring clamps for conductor insertion and removal.
  • Compact 60 mm width: Helps conserve space in electrical assemblies.
  • Side-entry wiring: Supports organised conductor routing.
  • Black insulating housing: Manufactured from durable polyamide.
  • Flame-retardant material: UL 94 V-0 classification.
  • Halogen-free construction: Suitable where halogen-free components are specified.
  • Compatible accessory system: Supports appropriate WAGO marking, testing and conductor preparation accessories.

Factory-Marked PE-N-L1-L2-L3 Terminal Arrangement

The WAGO 862-1525 features the factory-applied identification sequence:

PE – N – L1 – L2 – L3

This marking is intended to help installers identify the five pole positions when wiring appropriately designed electrical equipment.

The marking can be particularly useful in assemblies where a consistent terminal layout is required for manufacturing, servicing and maintenance.

Critical distinction: Although the first position is marked PE, WAGO specifies the 862-1525 as a product without ground contact. The terminal strip does not provide an integrated protective-earth connection to the chassis.

Where the PE-marked position is intended to carry a protective conductor, the complete protective-earth arrangement must be separately designed, verified and compliant with the applicable electrical safety requirements. The presence of a PE label alone must not be treated as evidence of protective-earth continuity.

The five poles are otherwise electrically separate, with four connection points sharing the same potential within each pole.

Snap-In Mounting Feet at Positions 2 and 4

The WAGO 862-1525 is designed for snap-in chassis mounting rather than conventional DIN rail installation.

Its integrated mounting feet are positioned at pole locations 2 and 4, allowing the terminal strip to engage with appropriately prepared openings in an equipment panel.

This mounting arrangement can reduce the need for separate terminal-strip fixing screws and supports repeatable assembly in electrical manufacturing environments.

Before installation, the panel's mounting holes, spacing, thickness and tolerances should be checked against the official WAGO dimensional drawing.

The terminal strip must be securely seated and sufficient clearance must be provided for the connected conductors, push-buttons and any testing accessories.

Note: WAGO 862 Series terminal strips are available with several different mounting arrangements. A visually similar product may not be mechanically interchangeable with the 862-1525.

Push-in CAGE CLAMP® Spring-Pressure Connection Technology

The WAGO 862-1525 uses Push-in CAGE CLAMP® technology, which secures conductors using a spring-pressure clamping mechanism rather than a conventional conductor clamping screw.

Suitable solid copper conductors from 0.75–4 mm² can be inserted directly after correct preparation.

Other permitted conductor types can be terminated by operating the spring clamp using the integrated push-button or an appropriate tool.

The terminal strip supports:

  • Solid copper conductors: 0.5–4 mm².
  • Stranded copper conductors: 0.5–4 mm².
  • Fine-stranded copper conductors: 0.5–4 mm².
  • Fine-stranded conductors with insulated ferrules: 0.5–2.5 mm².

The manufacturer specifies a 10–11 mm conductor stripping length. Conductors must be prepared correctly and inserted fully into the terminal.

For fine-stranded conductors, ferrule selection and direct push-in suitability must follow WAGO's installation instructions.

Five Poles and 20 Conductor Connection Points

The WAGO 862-1525 provides 20 connection points arranged as five separate groups of four.

Within each group, all four connection points share one electrical potential. This allows compatible conductors to be connected together or distributed within the same pole.

Each of the five poles is electrically isolated from the others, making the terminal strip suitable for assemblies requiring several distinct connection groups.

The factory-applied PE-N-L1-L2-L3 markings help identify the intended terminal positions, but actual circuit assignments and protective-earth provisions must be determined by the equipment design.

The terminal strip's 32 A current rating and 500 V voltage rating apply under the specified IEC/EN conditions. The conductor size, installation environment and protective devices must also be suitable for the intended circuit.

How to Install the WAGO 862-1525 Terminal Strip

  1. Isolate the supply: Safely disconnect the relevant equipment and verify that it is de-energised.
  2. Confirm the product reference: Check that the WAGO 862-1525 and its marked terminal arrangement are suitable for the installation.
  3. Check the mounting design: Verify the chassis preparation against WAGO's dimensional drawing for snap-in feet at positions 2 and 4.
  4. Install the terminal strip: Align and engage the integrated mounting feet using the manufacturer's specified method.
  5. Check mechanical security: Ensure that the terminal strip is correctly seated.
  6. Verify the pole assignments: Check the PE-N-L1-L2-L3 markings against the electrical wiring diagram.
  7. Confirm protective-earth provisions: Do not rely on the PE marking as an integrated chassis earth connection.
  8. Check conductor compatibility: Confirm that each conductor type and size is permitted.
  9. Strip the conductors: Remove 10–11 mm of insulation using a suitable tool.
  10. Terminate the conductors: Use direct push-in insertion where permitted or operate the spring clamp for other suitable conductor types.
  11. Check conductor retention: Ensure that each conductor is fully inserted and secured.
  12. Inspect and test: Complete the required electrical and protective-earth continuity checks before energising the equipment.

Safety note: Installation must be carried out by competent persons in accordance with the latest WAGO instructions and applicable electrical standards.

Typical Applications

  • Industrial control panels: Organised five-pole electrical connection layouts.
  • Electrical equipment manufacturing: Repeatable installation of marked terminal strips.
  • Machinery wiring: Fixed connection points within equipment enclosures.
  • Lighting equipment: Multi-pole connections in suitable electrical assemblies.
  • Power distribution equipment: Appropriately rated conductor distribution within enclosed equipment.
  • HVAC controls: Organised power and control wiring.
  • Building automation: Clearly identified terminal positions for compatible circuits.
  • Electrical panel assembly: Snap-in mounted connection groups.
  • Commercial electrical equipment: Compact and accessible conductor termination.
  • Equipment refurbishment: Replacement of compatible marked chassis-mount terminal strips.
  • Industrial maintenance: Accessible connection points for inspection and servicing.

WAGO 862-1525 Compared with Other 862 Series Terminal Strips

  • WAGO 862-1525: Black, five-pole terminal strip with PE-N-L1-L2-L3 marking, without integrated ground contact, and snap-in feet at positions 2 and 4.
  • WAGO 862-625: White, five-pole terminal strip without factory PE-N-L1-L2-L3 marking and with snap-in feet at positions 2 and 4.
  • WAGO 862-515: Black, five-pole unmarked terminal strip with snap-in feet at positions 1, 3 and 5.
  • WAGO 862-505: Black, five-pole unmarked terminal strip with screw mounting.
  • WAGO 862-1525/999-950: Separate hazardous-area variant intended for specified Ex e II applications, with different applicable electrical ratings and approvals.

Important: The standard WAGO 862-1525 should not be assumed to have the hazardous-area certification of the 862-1525/999-950 variant.

Technical Specifications

Tick the specs you need, then view products that match.

Current 32 A
Voltage 500 V
Colour Black
Connection Spring clamp
Product Series WAGO 862
Connectable conductor cross section fine-strand with cable end sleeve 0.75 – 2.5 mm²
Height 35 mm
Operating temperature 105 – 105 °C
Number of poles 5
Rated current In 32 A
Connectable conductor cross section fine-strand without cable end sleeve 0.5 – 4 mm²
Number of clamp positions per pole 4
Rated voltage 500 V
Width 60 mm
Material insulation body Thermoplastic
Type of electrical connection 2 Spring clamp connection
Type of electrical connection 1 Spring clamp connection
Colour Black
Connectable conductor cross section multi-wired 0.5 – 4 mm²
Connectable conductor cross section solid-core 0.5 – 4 mm²
Depth 22.3 mm
Mounting method Other
Manufacturer WAGO
Manufacturer part number 862-1525
Product series WAGO 862 Series
Product type 4-conductor chassis-mount terminal strip
Connections per pole 4
Total conductor connection points 20
Number of electrical potentials 5
Factory marking PE-N-L1-L2-L3
Integrated ground contact No
Connection technology Push-in CAGE CLAMP®
Actuation Push-button / suitable operating tool
Conductor material Copper
Wiring direction Side-entry
Rated voltage (IEC/EN, III/3) 500 V
Rated current 32 A
Rated impulse voltage 6 kV
Overvoltage category III
Pollution degree 3
Nominal conductor cross-section 4 mm²
Solid conductor range 0.5–4 mm²
Solid conductor direct push-in range 0.75–4 mm²
Stranded conductor range 0.5–4 mm²
Fine-stranded conductor range 0.5–4 mm²
Fine-stranded conductor with insulated ferrule 0.5–2.5 mm²
Fine-stranded conductor with suitable ferrule, direct push-in From 0.75 mm², subject to manufacturer requirements
AWG conductor range 20–12 AWG
Conductor stripping length 10–11 mm
Snap-in mounting foot positions 2 and 4
Pole spacing 12 mm
Overall width 60 mm
Height above mounting surface 22.3 mm
Overall depth 35 mm
Housing colour Black
Insulation material Polyamide PA66
Flammability classification UL 94 V-0
Halogen-free Yes
Fire load 0.643 MJ
Individual product weight Approximately 34.164 g
Manufacturer packaging unit 200 pieces
Packaging type Bag
Country of origin Germany
GTIN / EAN 4044918509527
Customs tariff number 85369010000

Frequently Asked Questions

What is the WAGO 862-1525?

The WAGO 862-1525 is a black, five-pole chassis-mount terminal strip with four conductor connections per pole, Push-in CAGE CLAMP® technology, PE-N-L1-L2-L3 marking and snap-in mounting feet at positions 2 and 4.

How many wires can the WAGO 862-1525 connect?

It provides 20 conductor connection points arranged across five electrically separate poles, with four connections per pole.

What is the current and voltage rating of the WAGO 862-1525?

The standard WAGO 862-1525 is rated at 32 A and 500 V, with a 6 kV rated impulse voltage, under the specified IEC/EN conditions.

Does the WAGO 862-1525 include a protective-earth contact?

No. Although it is marked PE-N-L1-L2-L3, the WAGO 862-1525 is explicitly specified without an integrated ground contact. The PE marking does not provide automatic protective-earth continuity to the chassis.

What does PE-N-L1-L2-L3 mean?

These are factory-applied markings identifying five intended connection positions: protective earth, neutral and three line positions. The markings do not change the terminal strip's construction or provide an integrated protective-earth contact.

What conductor sizes can the WAGO 862-1525 accept?

The terminal strip supports suitable solid, stranded and fine-stranded copper conductors from 0.5–4 mm². Fine-stranded conductors with insulated ferrules are specified from 0.5–2.5 mm².

Can solid copper wires be pushed directly into the WAGO 862-1525?

Yes. Suitable solid copper conductors from 0.75–4 mm² can be connected using direct push-in termination after correct preparation.

What is the conductor stripping length?

The manufacturer specifies a 10–11 mm stripping length.

How is the WAGO 862-1525 mounted?

It uses snap-in chassis mounting feet at positions 2 and 4. The chassis must be prepared according to the manufacturer's dimensional drawing.

What are the dimensions of the WAGO 862-1525?

The terminal strip is 60 mm wide and 35 mm deep, with a 22.3 mm height above the mounting surface and 12 mm pole spacing.

Is the WAGO 862-1525 suitable for hazardous areas?

The standard WAGO 862-1525 should not be treated as a hazardous-area-certified product. The separate 862-1525/999-950 variant is specified for certain Ex e II applications. Always verify the exact part number, approvals and installation conditions.

What is the GTIN or EAN for WAGO 862-1525?

The manufacturer's GTIN / EAN is 4044918509527.

WAGO 862-1525 – Professional Marked Terminal Strip

The WAGO 862-1525 combines five electrically separate poles, 20 conductor connection points, Push-in CAGE CLAMP® technology and factory-applied PE-N-L1-L2-L3 markings. Its snap-in mounting feet at positions 2 and 4, compact black housing and 32 A / 500 V ratings make it a practical choice for professional electrical equipment assembly. The product is supplied without an integrated ground contact.

Manufacturer references: WAGO 862-1525 official product page and WAGO 862-1525 technical datasheet. Always verify the latest manufacturer instructions before installation.