Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.18
The WAGO 862-1515 is a professional 5-pole, 4-conductor chassis-mount terminal strip designed for reliable electrical connections in industrial equipment, control panels and electrical assemblies. Part of WAGO's established 862 Series, this black terminal strip features Push-in CAGE CLAMP® spring connection technology, integrated push-button actuation and preprinted PE-N-L1-L2-L3 terminal identification.
The terminal strip provides 20 conductor connection points across five independent electrical potentials, with four conductor connections available per pole. Its integrated snap-in mounting feet at positions 1, 3 and 5 enable secure installation into compatible chassis panels. The clearly identified terminal positions simplify conductor organisation in equipment using protective-earth, neutral and three-phase circuit designations.
Rated at 32 A and 500 V, the WAGO 862-1515 supports conductors up to 4 mm² and provides a compact solution for industrial equipment wiring. Importantly, although the terminal strip includes a position marked PE, this particular version is supplied without an integrated protective-earth contact. The PE marking must therefore not be interpreted as an automatic chassis-earth connection.
WAGO's Push-in CAGE CLAMP® technology uses spring-pressure contacts to establish dependable electrical connections without conventional screw-clamp terminals. Suitable solid conductors and correctly prepared fine-stranded conductors with ferrules can be inserted directly into the connection openings, while integrated push-buttons and operating tools facilitate the termination and release of other supported conductor types. This design helps reduce installation time while maintaining consistent electrical contact pressure.
The WAGO 862-1515 provides five electrically separate poles marked PE, N, L1, L2 and L3, making it useful for organising conductors in three-phase electrical assemblies. Its integrated snap-in feet at positions 1, 3 and 5 simplify mounting into compatible chassis openings. However, the PE-marked pole is not equipped with an integrated chassis-ground contact. Where protective-earth continuity is required, the installer must provide and verify an appropriate protective-earth connection in accordance with the equipment design and applicable electrical regulations.
Tick the specs you need, then view products that match.
| Current | 32 A | |
|---|---|---|
| Voltage | 500 V | |
| Colour | Black | |
| Connection | Spring clamp | |
| Product Series | WAGO 862 | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.75 – 2.5 mm² | |
| Height | 35 mm | |
| Operating temperature | 105 – 105 °C | |
| Number of poles | 5 | |
| Rated current In | 32 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.5 – 4 mm² | |
| Number of clamp positions per pole | 4 | |
| Rated voltage | 500 V | |
| Width | 60 mm | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of electrical connection 1 | Spring clamp connection | |
| Colour | Black | |
| Connectable conductor cross section multi-wired | 0.5 – 4 mm² | |
| Connectable conductor cross section solid-core | 0.5 – 4 mm² | |
| Depth | 22.3 mm | |
| Halogen free | Yes | |
| Mounting method | Other | |
| Manufacturer | WAGO | |
| Series | 862 Chassis-Mount Terminal Strips | |
| Manufacturer part number | 862-1515 | |
| Product type | 4-conductor chassis-mount terminal strip | |
| Connection technology | Push-in CAGE CLAMP® | |
| Actuation type | Push-button / operating tool | |
| Connections per pole | 4 | |
| Total connection points | 20 | |
| Number of electrical potentials | 5 | |
| Terminal identification | PE-N-L1-L2-L3 | |
| Integrated protective-earth contact | No | |
| Rated current | 32 A | |
| Rated impulse withstand voltage | 6 kV | |
| Overvoltage category | III | |
| Pollution degree | 3 | |
| Solid conductor cross-section | 0.5–4 mm² | |
| Solid conductor direct push-in range | 0.75–4 mm² | |
| Stranded conductor cross-section | 0.5–4 mm² | |
| Fine-stranded conductor cross-section | 0.5–4 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.5–2.5 mm² | |
| Fine-stranded conductor with ferrule, direct push-in | From 0.75 mm², subject to conductor preparation | |
| Conductor AWG range | 20–12 AWG | |
| Connectable conductor materials | Copper and aluminium, subject to WAGO's applicable connection instructions | |
| Conductor stripping length | 10–11 mm | |
| Wiring direction | Side entry | |
| Pole spacing | 12 mm | |
| Mounting type | Chassis snap-in mounting | |
| Mounting foot positions | 1, 3 and 5 | |
| Snap-in mounting opening diameter | 5.2 mm | |
| Housing colour | Black | |
| Insulation material | Polyamide | |
| Flammability classification | UL94 V-0 | |
| Height above mounting surface | 22.3 mm | |
| Dimensions (W × H × D) | 60 × 22.3 × 35 mm | |
| Weight | Approximately 34.254 g | |
| GTIN / EAN | 4044918509510 | |
| Country of origin | Germany | |
| Manufacturer packaging unit | 200 pieces |
The WAGO 862-1515 is a 5-pole, 4-conductor chassis-mount terminal strip designed for electrical connections in industrial equipment, control panels and three-phase electrical assemblies. Its PE-N-L1-L2-L3 marking provides convenient identification of the five terminal positions.
The terminal strip provides 20 conductor connection points across five independent electrical potentials. Each pole accommodates four conductor connections, allowing conductors connected to the same pole to share a common electrical potential.
No. Although the WAGO 862-1515 includes a terminal position marked PE, the product is supplied without an integrated protective-earth contact. The PE marking identifies the intended circuit position but does not provide automatic electrical bonding to the mounting chassis. Protective-earth continuity must be established separately where required.
The WAGO 862-1515 is rated at 32 A and 500 V, with a rated impulse withstand voltage of 6 kV under IEC/EN conditions. It accommodates solid, stranded and fine-stranded conductors from 0.5–4 mm², subject to the appropriate termination method.
The WAGO 862-1515 uses integrated snap-in mounting feet at positions 1, 3 and 5. These allow the terminal strip to be secured into compatible chassis openings without conventional screw fastening. The chassis must be prepared according to WAGO's mounting dimensions and installation instructions.
The WAGO 862-1515 combines dependable Push-in CAGE CLAMP® connections, clearly marked PE-N-L1-L2-L3 terminal positions and convenient snap-in mounting, helping electrical engineers and equipment manufacturers achieve organised, reliable conductor connections in industrial electrical assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.