Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.18
The WAGO 862-1505 is a robust and compact 4-conductor chassis-mount terminal strip designed for dependable electrical connections in industrial control panels, machinery, electrical distribution equipment and OEM assemblies. Part of the established WAGO 862 Series, it features proven Push-in CAGE CLAMP® spring connection technology, providing secure, screwless conductor termination with integrated push-button actuation.
The WAGO 862-1505 features a 5-pole configuration with four conductor connection points per pole, providing 20 connection points across five independent electrical potentials. Its black insulating housing incorporates PE-N-L1-L2-L3 identification, making it particularly useful for organised multi-circuit wiring arrangements. Although one position is labelled PE, this version is supplied without an integrated protective earth contact, so any protective earthing arrangement must be designed and verified separately.
With a nominal conductor cross-section of 4 mm², support for solid, stranded and fine-stranded copper conductors from 0.5–4 mm², a 500 V rated voltage and a 32 A rated current, the WAGO 862-1505 offers an efficient solution for industrial electrical wiring. Its 60 mm width, 12 mm pole spacing and direct chassis-mount design make it suitable for equipment requiring secure connections, clear circuit identification and efficient use of installation space.
Chassis-mounted terminal strips such as the WAGO 862-1505 provide a practical method of connecting multiple electrical conductors within industrial equipment, electrical cabinets and control assemblies. Compared with conventional screw-terminal connections, WAGO's Push-in CAGE CLAMP® technology uses spring pressure to establish and maintain electrical contact. This eliminates the need for conductor clamping screws and helps reduce maintenance requirements associated with loose screw-terminal connections.
The WAGO 862 Series is designed to simplify equipment wiring while accommodating multiple connection points, direct chassis mounting and flexible conductor termination. The WAGO 862-1505 provides five independent electrical potentials, each with four conductor connection points. This allows up to four compatible conductors to be connected to each potential while keeping the five circuits electrically separate unless an appropriate jumper or external connection is deliberately installed.
One of the main advantages of the WAGO 862-1505 is its PE-N-L1-L2-L3 marking arrangement. The printed identification allows installers to distinguish terminal positions intended for different circuit functions and supports organised wiring in equipment using multiple live conductors and a neutral conductor. However, the product does not contain an integrated protective earth contact. The PE-labelled pole is electrically isolated from the mounting chassis unless a separately designed connection establishes the required protective bonding.
The Push-in CAGE CLAMP® system provides flexible conductor termination. Suitable solid conductors from 0.75–4 mm² can be inserted directly into the spring connection without opening the clamp. Other supported conductor types can be connected by actuating the integrated push-button or using an appropriate operating tool. This allows installers to work with solid, stranded and fine-stranded copper conductors according to the manufacturer's specified connection ranges.
The conductor stripping length is 10–11 mm, helping simplify cable preparation and installation. Once the conductor has been prepared and fully inserted, the internal spring mechanism maintains electrical contact without a specified screw-tightening torque. For fine-stranded conductors, suitably crimped ferrules may be used within the approved conductor and ferrule size ranges.
With a 500 V rated voltage, 32 A rated current and 6 kV rated impulse withstand voltage, the WAGO 862-1505 is suitable for a wide range of industrial power and control connections. These ratings are specified under overvoltage category III and pollution degree 3 conditions in accordance with IEC/EN 60664-1. The actual operating current must also account for conductor size, installation conditions and applicable equipment design requirements.
The terminal strip features a 12 mm pole spacing and an overall width of 60 mm, providing five electrical potentials within a compact assembly. Its height from the mounting surface is 22.3 mm, while its depth is 35 mm. These dimensions support installation in suitable electrical equipment where secure mounting and efficient use of available enclosure space are important.
The WAGO 862-1505 is designed for chassis mounting using an M3 screw and nut or a suitable 2.9 mm diameter self-tapping screw inserted from above. This mounting arrangement differs from certain alternative WAGO 862 variants that use fastening from below. Selecting the correct mounting version is important when replacing components or designing equipment with restricted fastening access.
The terminal strip is compatible with appropriate WAGO 862-482 jumper accessories, enabling selected potentials to be connected where permitted by the equipment design. Compatible WAGO marking strips can also be used for additional circuit identification. These accessories help support modular wiring arrangements, equipment documentation and maintenance procedures.
Integrated test points provide access for electrical measurements using suitable WAGO testing accessories. Compatible products include the WAGO 210-136 test plug and WAGO 210-137 test plug. The applicable voltage ratings and safety limitations of the selected testing accessories must be observed independently of the terminal strip's rated operating voltage.
The black insulating housing is manufactured from polyamide 66, a durable engineering thermoplastic suitable for industrial electrical components. Its UL94 V-0 flammability classification and halogen-free construction support integration into appropriately designed industrial equipment. The housing provides mechanical support for the spring-clamp connections while maintaining electrical separation between the five poles.
The WAGO 862-1505 is suitable for industrial electrical engineers, control panel manufacturers, machinery builders and maintenance professionals requiring reliable multi-pole connections. It is particularly useful for equipment where several conductors must share individual electrical potentials, such as power distribution modules, industrial machinery and automated control systems.
Unlike the separate WAGO 862-1505/999-950 variant, the standard 862-1505 is not designated as an Ex e increased-safety connector. It must not be substituted for an Ex-rated version in hazardous-area equipment unless the complete equipment design and certification expressly permit that substitution.
For safe operation, the terminal strip must be installed with appropriate mounting hardware and used within its specified electrical and conductor ratings. Connections should be made or disconnected only when safely de-energised. Any protective earthing arrangement must be separately verified, and the completed installation must comply with relevant electrical safety requirements, including BS 7671 where applicable in the United Kingdom.
Tick the specs you need, then view products that match.
| Current | 32 A | |
|---|---|---|
| Voltage | 500 V | |
| Colour | Black | |
| Connection | Spring clamp | |
| Product Series | WAGO 862 | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.75 – 2.5 mm² | |
| Height | 35 mm | |
| Operating temperature | 105 – 105 °C | |
| Number of poles | 5 | |
| Rated current In | 32 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.5 – 4 mm² | |
| Number of clamp positions per pole | 4 | |
| Rated voltage | 500 V | |
| Width | 60 mm | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of electrical connection 1 | Spring clamp connection | |
| Colour | Black | |
| Connectable conductor cross section multi-wired | 0.5 – 4 mm² | |
| Connectable conductor cross section solid-core | 0.5 – 4 mm² | |
| Depth | 22.3 mm | |
| Mounting method | Other | |
| Manufacturer | WAGO | |
| Series | 862 Series | |
| Model | 862-1505 | |
| Product type | Chassis-mount terminal strip | |
| Product category | Industrial electrical terminal blocks | |
| Terminal configuration | 4-conductor, 5-pole | |
| Connection points per pole | 4 | |
| Total number of connection points | 20 | |
| Total number of electrical potentials | 5 | |
| Number of levels | 1 | |
| Circuit marking | PE-N-L1-L2-L3 | |
| Protective earth contact | Without integrated ground contact | |
| Connection technology | Push-in CAGE CLAMP® | |
| Termination method | Screwless spring-clamp connection | |
| Actuation type | Push-button and operating tool | |
| Wiring direction | Side-entry wiring | |
| Nominal conductor cross-section | 4 mm² | |
| Solid conductor range | 0.5–4 mm² (20–12 AWG) | |
| Solid conductor direct push-in range | 0.75–4 mm² (18–12 AWG) | |
| Stranded conductor range | 0.5–4 mm² (20–12 AWG) | |
| Fine-stranded conductor range | 0.5–4 mm² (20–12 AWG) | |
| Fine-stranded conductor with insulated ferrule | 0.5–2.5 mm² | |
| Fine-stranded conductor with ferrule, direct push-in | From 0.75 mm², subject to conductor characteristics | |
| Conductor stripping length | 10–11 mm | |
| Connectable conductor materials | Copper; aluminium subject to manufacturer's specific connection requirements | |
| Rated voltage (IEC/EN) | 500 V | |
| Rated current (IEC/EN) | 32 A | |
| Rated impulse withstand voltage | 6 kV | |
| Overvoltage category | III | |
| Pollution degree | 3 | |
| Electrical insulation coordination | IEC/EN 60664-1 | |
| Pole spacing | 12 mm | |
| Mounting type | Chassis screw mounting | |
| Primary mounting hardware | M3 screw and nut | |
| Alternative mounting hardware | 2.9 mm diameter self-tapping screw | |
| Fastening direction | From above | |
| Terminal strip width | 60 mm | |
| Height from mounting surface | 22.3 mm | |
| Terminal strip depth | 35 mm | |
| Housing colour | Black | |
| Insulating material | Polyamide 66 (PA66) | |
| Flammability classification | UL94 V-0 | |
| Halogen-free | Yes | |
| Component weight | Approximately 34.094 g | |
| Fire load | 0.641 MJ | |
| Testing provision | Built-in test points | |
| Compatible test plug | WAGO 210-136, 2 mm diameter | |
| Alternative test accessory | WAGO 210-137, 2.3 mm diameter | |
| Compatible operating tool | WAGO 210-720 | |
| Compatible jumper accessory | WAGO 862-482 | |
| Compatible marking strip | WAGO 709-177 | |
| Alternative marking strip | WAGO 709-178 | |
| UL approval reference | E45172 | |
| CSA certificate | 1505030 | |
| CCA certificate | NTR NL 6912 | |
| ENEC certificate | 143856-01 | |
| Marine approval | Lloyd's Register | |
| RoHS compliance | Compliant | |
| ETIM classification | EC001284 | |
| UNSPSC classification | 39121410 | |
| Standard packaging quantity | 200 pieces | |
| Packaging type | Bag | |
| Product GTIN | 4044918509503 | |
| Country of origin | Germany | |
| Customs tariff number | 85369010000 |
The WAGO 862-1505 is a 5-pole chassis-mount terminal strip used for electrical connections in industrial equipment, control panels and machinery. It features 20 conductor connection points across five independent electrical potentials and uses Push-in CAGE CLAMP® technology for secure, screwless conductor termination. Its PE-N-L1-L2-L3 markings support organised multi-circuit wiring arrangements.
The WAGO 862-1505 has 5 independent electrical poles, each with 4 conductor connection points. This provides a total of 20 connection points across five separate electrical potentials. The pole spacing is 12 mm. Although one position is labelled PE, the terminal strip does not include an integrated protective earth contact.
The WAGO 862-1505 supports solid, stranded and fine-stranded copper conductors from 0.5–4 mm² (20–12 AWG). Direct push-in termination of suitable solid conductors is specified from 0.75–4 mm², while fine-stranded conductors with insulated ferrules are supported from 0.5–2.5 mm². The required conductor stripping length is 10–11 mm.
The WAGO 862-1505 has a 500 V rated voltage, a 32 A rated current and a 6 kV rated impulse withstand voltage according to IEC/EN 60664-1. These ratings correspond to overvoltage category III and pollution degree 3. The terminal strip must be used within the applicable conductor, mounting and equipment design requirements.
The WAGO 862-1505 is marked PE-N-L1-L2-L3 but is supplied without an integrated protective earth contact. The PE-labelled connection is not automatically bonded to the mounting chassis, so any required protective earthing must be established and verified separately. The terminal strip is designed for chassis mounting using an M3 screw and nut or a suitable 2.9 mm self-tapping screw inserted from above.
WAGO 862 Series chassis-mount terminal strips are designed to provide dependable electrical connections in industrial equipment, machinery and control systems. The WAGO 862-1505 combines proven Push-in CAGE CLAMP® technology, 20 conductor connection points, five independent electrical potentials, PE-N-L1-L2-L3 identification and secure chassis mounting to support efficient installation, reliable electrical distribution and straightforward equipment maintenance.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.