Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£3.08
The WAGO 862-1505/999-950 is a robust 5-pole, 4-conductor chassis-mount terminal strip designed for secure electrical connections in industrial equipment, control panels and electrical installations requiring components suitable for increased-safety Ex e II applications. Part of the established WAGO 862 Series, this terminal strip combines reliable Push-in CAGE CLAMP® spring-pressure connection technology with a compact, mechanically secure mounting arrangement.
Featuring a PE-N-L1-L2-L3 pole configuration, the WAGO 862-1505/999-950 provides organised connection points for protective earth, neutral and three-phase conductors. Each of its five poles accommodates four conductor connections, providing 20 connection points across five separate electrical potentials. The black insulating housing, side-entry wiring arrangement and push-button actuation help simplify conductor termination, equipment assembly and maintenance.
With an Ex e II rated voltage of 440 V, an Ex e II rated current of 28 A and compatibility with copper conductors up to 4 mm², this terminal strip is suitable for appropriately designed electrical installations where increased-safety requirements apply. Its chassis-mount construction enables secure installation using a 3 mm diameter screw and nut or a suitable 2.9 mm diameter self-tapping screw.
The WAGO 862-1505/999-950 is designed to provide dependable conductor termination in electrical equipment where secure spring-clamp connections and increased-safety application requirements are important. Its Push-in CAGE CLAMP® technology maintains electrical contact through spring pressure, reducing reliance on conventional screw-clamping connections and supporting consistent electrical performance under suitable operating conditions.
The terminal strip provides five separate electrical potentials with four conductor connections per pole. Its PE-N-L1-L2-L3 configuration allows protective earth, neutral and three-phase wiring to be arranged clearly within electrical equipment. Although the terminal strip includes a PE-labelled pole, this version is supplied without an integrated chassis-ground contact. Any required protective bonding must therefore be established separately in accordance with the equipment design and applicable electrical standards.
The /999-950 variant is specifically identified by WAGO as suitable for Ex e II applications. Use in potentially explosive atmospheres requires compliance with the applicable hazardous-area equipment certification, installation conditions and relevant standards. The terminal strip's suitability does not independently certify the complete electrical enclosure or assembled equipment for hazardous-area use.
For installation, conductors should be stripped to the specified 10–11 mm length and terminated using the appropriate Push-in CAGE CLAMP® procedure. The chassis-mount arrangement provides secure mechanical attachment, while the compact housing and side-entry conductor configuration support efficient equipment wiring and maintenance.
Tick the specs you need, then view products that match.
| Current | 28 A | |
|---|---|---|
| Voltage | 440 V | |
| Colour | Black | |
| Connection | Spring clamp | |
| Product Series | WAGO 862 | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.75 – 2.5 mm² | |
| Height | 35 mm | |
| Operating temperature | 105 – 105 °C | |
| Number of poles | 5 | |
| Rated current In | 28 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.5 – 4 mm² | |
| Number of clamp positions per pole | 4 | |
| Rated voltage | 440 V | |
| Width | 60 mm | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of electrical connection 1 | Spring clamp connection | |
| Colour | Black | |
| Explosion-tested version 'Ex e' | Yes | |
| Connectable conductor cross section multi-wired | 0.5 – 4 mm² | |
| Connectable conductor cross section solid-core | 0.5 – 4 mm² | |
| Depth | 22.3 mm | |
| Halogen free | Yes | |
| Mounting method | Other | |
| Manufacturer | WAGO | |
| Series | 862 Series | |
| Model | 862-1505/999-950 | |
| Product type | Ex e II chassis-mount terminal strip | |
| Application classification | Suitable for Ex e II applications | |
| Terminal arrangement | PE-N-L1-L2-L3 | |
| Connection points per pole | 4 | |
| Total connection points | 20 | |
| Number of electrical potentials | 5 | |
| Connection technology | Push-in CAGE CLAMP® | |
| Actuation method | Push-button | |
| Rated voltage (Ex e II) | 440 V | |
| Rated current (Ex e II) | 28 A | |
| Conductor material | Copper | |
| Solid conductor cross-section | 0.5–4 mm² | |
| Solid conductor direct push-in range | 0.75–4 mm² | |
| Stranded conductor cross-section | 0.5–4 mm² | |
| Fine-stranded conductor cross-section | 0.5–4 mm² | |
| Fine-stranded conductor with insulated ferrule | 0.5–1.5 mm² | |
| Fine-stranded conductor with ferrule, direct push-in | From 0.75 mm², subject to conductor and ferrule compatibility | |
| Conductor size (AWG) | 20–12 AWG | |
| Strip length | 10–11 mm | |
| Wiring direction | Side-entry | |
| Pole spacing | 12 mm | |
| Housing colour | Black | |
| Insulating material | Polyamide | |
| Flammability classification | UL 94 V-0 | |
| Mounting type | Chassis / screw mounting | |
| Mounting fastener | 3 mm diameter screw and nut or 2.9 mm diameter self-tapping screw | |
| Integrated chassis-ground contact | None | |
| Height from mounting surface | 22.3 mm | |
| Weight | Approximately 34.1 g | |
| Country of origin | Germany | |
| GTIN | 4045454789213 |
The WAGO 862-1505/999-950 is a five-pole chassis-mount terminal strip used for connecting electrical conductors in industrial equipment and suitably designed increased-safety Ex e II installations. It provides four conductor connections per pole for organised electrical distribution.
Yes. WAGO identifies this variant as suitable for Ex e II applications. Its use in hazardous areas must comply with the applicable equipment certification, installation conditions and relevant explosion-protection standards. The terminal strip alone does not establish hazardous-area certification for the complete assembly.
The terminal strip has a 28 A rated current for Ex e II applications. The permissible operating current must also account for conductor size, installation conditions and applicable certification requirements.
The WAGO 862-1505/999-950 has a 440 V rated voltage for Ex e II applications, subject to the manufacturer's specified operating and installation conditions.
The terminal strip has five poles with four conductor connection points per pole, providing a total of 20 connection points across five separate electrical potentials.
The terminal strip accommodates compatible solid, stranded and fine-stranded copper conductors from 0.5–4 mm². Direct push-in termination is available for suitable solid conductors from 0.75–4 mm², with additional restrictions applying to ferruled conductors.
The terminal strip uses Push-in CAGE CLAMP® spring-pressure connection technology with push-button actuation, allowing compatible conductors to be terminated securely without conventional screw-clamping terminals.
Conductors should be stripped to a length of 10–11 mm before insertion into the terminal strip, following the manufacturer's installation instructions.
No. The WAGO 862-1505/999-950 is supplied without an integrated chassis-ground contact. The PE-labelled terminal provides a conductor connection position, but any required protective bonding to the equipment chassis must be established separately.
The terminal strip is designed for chassis mounting using a 3 mm diameter screw and nut or a suitable 2.9 mm diameter self-tapping screw, in accordance with WAGO's mounting instructions.
Both products belong to the WAGO 862 Series and share a five-pole, four-conductor-per-pole chassis-mount arrangement. The 862-1505/999-950 is the variant specifically identified as suitable for Ex e II applications, with an Ex e II electrical rating of 440 V and 28 A.
WAGO 862 Series chassis-mount terminal strips provide industrial panel builders, electrical engineers and OEM equipment manufacturers with dependable spring-clamp conductor connections. The WAGO 862-1505/999-950 extends this proven terminal strip design to applications requiring Ex e II suitability, combining secure conductor termination, compact construction and organised five-pole wiring for demanding industrial electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.