Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£1.73
The WAGO 862-1504 is a 4-pole, 4-conductor chassis-mount terminal strip designed for reliable electrical connections in lighting equipment, industrial control panels and OEM electrical assemblies. Part of the WAGO 862 Series, this black terminal strip uses Push-in CAGE CLAMP® spring-pressure connection technology to provide secure conductor termination without conventional screw-terminal tightening.
Featuring 16 conductor connection points across four independent electrical potentials, the WAGO 862-1504 provides four conductor connections per pole. Its PE-N-L1-L2 identification markings help installers organise wiring, while integrated push-buttons allow compatible conductors to be inserted and removed efficiently. Although one position is marked PE, this particular model is supplied without a dedicated protective earth contact.
With a 32 A rated current, 500 V rated voltage and compatibility with 0.5–4 mm² copper conductors, the WAGO 862-1504 offers a versatile solution for fixed electrical equipment. Its 48 mm width, 12 mm pole spacing and screw-mounting arrangement make it suitable for compact, organised chassis-mounted installations.
The WAGO 862-1504 provides an efficient wiring solution for electrical equipment requiring several conductor connections across four independent electrical potentials. Each pole accommodates four conductors, allowing incoming and outgoing wiring to be organised within a compact terminal strip. Its Push-in CAGE CLAMP® spring-pressure system maintains reliable electrical contact, while integrated push-buttons simplify conductor insertion and removal.
Designed for chassis-mounted electrical equipment, the WAGO 862 Series is suitable for lighting equipment manufacturers, industrial panel builders and OEM electrical assemblies. The 862-1504 combines PE-N-L1-L2 identification markings with a screw-mounted configuration intended for 3 mm diameter screw-and-nut fixings. Its 32 A current rating and 500 V voltage rating make it suitable for appropriately designed circuits, subject to the ratings and requirements of the complete installation.
Tick the specs you need, then view products that match.
| Current | 32 A | |
|---|---|---|
| Voltage | 500 V | |
| Colour | Black | |
| Connection | Spring clamp | |
| Product Series | WAGO 862 | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.75 – 2.5 mm² | |
| Height | 35 mm | |
| Operating temperature | 105 – 105 °C | |
| Number of poles | 4 | |
| Rated current In | 32 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.5 – 4 mm² | |
| Number of clamp positions per pole | 4 | |
| Rated voltage | 500 V | |
| Width | 48 mm | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of electrical connection 1 | Spring clamp connection | |
| Colour | Black | |
| Connectable conductor cross section multi-wired | 0.5 – 4 mm² | |
| Connectable conductor cross section solid-core | 0.5 – 4 mm² | |
| Depth | 22.3 mm | |
| Halogen free | Yes | |
| Mounting method | Other | |
| Manufacturer | WAGO | |
| Series | 862 Series | |
| Model | 862-1504 | |
| Product designation | 4-conductor chassis-mount terminal strip; without ground contact; PE-N-L1-L2; 4-pole; for 3 mm diameter screw and nut; 4 mm²; black | |
| Product type | Chassis-mount terminal strip | |
| Product category | Field-wiring terminal blocks | |
| Conductor connections per pole | 4 | |
| Total conductor connection points | 16 | |
| Number of electrical potentials | 4 | |
| Terminal identification | PE-N-L1-L2 | |
| Protective earth contact | None | |
| Rated current (IEC) | 32 A | |
| Rated voltage (IEC) | 500 V | |
| Rated impulse voltage | 6 kV | |
| Pollution degree | 3 | |
| Connection technology | Push-in CAGE CLAMP® | |
| Actuation type | Push-button | |
| Connectable conductor material | Copper | |
| Nominal conductor cross-section | 4 mm² | |
| Solid conductor cross-section | 0.5–4 mm² | |
| Solid conductor size | 20–12 AWG | |
| Stranded conductor cross-section | 0.5–4 mm² | |
| Fine-stranded conductor cross-section | 0.5–4 mm² | |
| Conductor stripping length | 10–11 mm | |
| Wiring direction | Side-entry | |
| Pole spacing | 12 mm | |
| Mounting type | Chassis screw mounting | |
| Mounting fastener | 3 mm diameter screw and nut (M3) | |
| Housing colour | Black | |
| Flammability classification | UL94 V-0 | |
| Approximate weight | 27.23 g | |
| Manufacturer packaging unit | 200 pieces | |
| Country of origin | Germany | |
| GTIN | 4044918509480 |
The WAGO 862-1504 is a four-pole chassis-mount terminal strip designed for connecting copper conductors in lighting equipment, industrial control panels and OEM electrical assemblies. It provides 16 conductor connection points across four independent electrical potentials, with four connections per pole.
The WAGO 862-1504 has an IEC rated current of 32 A, a rated voltage of 500 V and a rated impulse voltage of 6 kV. The completed electrical assembly must comply with the applicable terminal, conductor and equipment ratings.
The WAGO 862-1504 accepts 0.5–4 mm² solid, stranded and fine-stranded copper conductors. Its nominal conductor cross-section is 4 mm², and the specified stripping length is 10–11 mm. Conductor preparation and any ferrule requirements should follow WAGO's technical documentation.
No. Although the WAGO 862-1504 carries PE-N-L1-L2 identification markings, the manufacturer specifies that this model is without a dedicated protective earth contact. A suitable protective earth connection must be provided separately where required by the electrical installation.
The WAGO 862-1504 is designed for chassis screw mounting using 3 mm diameter screw-and-nut fixings. It measures 48 mm wide and 35 mm deep. Unlike the separately designated WAGO 862-1504/999-950, the standard 862-1504 is not identified by WAGO as the Ex e II application variant.
WAGO 862 Series chassis-mount terminal strips provide dependable spring-pressure connections for lighting and industrial electrical equipment. The WAGO 862-1504 combines four independent electrical poles, 16 conductor connection points, a 32 A current rating, PE-N-L1-L2 identification and Push-in CAGE CLAMP® technology to help equipment manufacturers, electrical installers and maintenance engineers achieve efficient, organised and reliable wiring.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.