Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£2.65
The WAGO 862-1504/999-950 is a high-performance 4-conductor chassis-mount terminal strip designed for reliable electrical connections in industrial equipment, control panels and appropriately certified hazardous-area installations. Part of the established WAGO 862 Series, this terminal strip features advanced Push-in CAGE CLAMP® connection technology, providing secure, screwless conductor termination with convenient push-button operation.
Specifically designed for Ex e increased-safety applications, the WAGO 862-1504/999-950 incorporates a 4-pole configuration with four conductor connection points per pole. This provides 16 connection points across four separate electrical potentials, allowing multiple conductors to be connected within a compact, organised terminal assembly. The black housing features circuit identification associated with PE-N-L1-L2 arrangements, although the terminal strip itself is supplied without an integrated protective earth contact.
With a nominal conductor cross-section of 4 mm², support for solid, stranded and fine-stranded copper conductors from 0.5–4 mm², and an Ex e II rated voltage of 440 V, the WAGO 862-1504/999-950 is engineered for demanding industrial electrical applications. Its 28 A rated current, 12 mm pole spacing, chassis-mount construction and ATEX and IECEx component certifications make it a practical choice for equipment manufacturers requiring dependable electrical connections within appropriately designed hazardous-area assemblies.
Industrial terminal strips play a critical role in electrical distribution, control wiring and equipment manufacturing. In environments where potentially explosive atmospheres may occur, the selection of appropriate electrical connection components becomes especially important. The WAGO 862-1504/999-950 is specifically designed for incorporation into electrical equipment requiring Ex e increased-safety connection technology, subject to the applicable certification and installation conditions.
The WAGO 862 Series uses Push-in CAGE CLAMP® technology to provide reliable spring-pressure electrical connections. Unlike conventional screw terminals, spring-clamp contacts maintain conductor pressure without depending on screw-tightening torque. This helps provide consistent electrical contact and reduces the maintenance requirements associated with conventional screw-terminal connections.
The four-pole configuration of the WAGO 862-1504/999-950 offers four separate electrical potentials, each with four conductor connection points. This arrangement allows installers to connect multiple conductors to each circuit while maintaining separation between the individual poles. It is particularly useful for industrial equipment incorporating multi-conductor supply arrangements, control wiring and electrical distribution systems.
The terminal strip is associated with PE-N-L1-L2 circuit identification, making it suitable for appropriately designed wiring layouts that require clear conductor designation. However, the product is specifically classified as being without an integrated protective earth contact. Any conductor or terminal position used for protective bonding must therefore be incorporated into a separately verified protective earthing arrangement that satisfies the applicable safety and certification requirements. The printed PE designation alone does not establish an automatic protective earth connection to the chassis.
With a 440 V rated voltage and 28 A rated current under the specified Ex e II conditions, the connector provides electrical performance suitable for a range of industrial installations. These ratings are specific to the certified operating conditions and should not be substituted with the different standard ratings associated with some non-Ex WAGO 862 Series variants.
The WAGO 862-1504/999-950 accepts solid, stranded and fine-stranded copper conductors from 0.5–4 mm². Suitable solid conductors from 0.75–4 mm² can be inserted directly using the push-in connection method. Other supported conductor types can be terminated using the integrated push-button mechanism or an appropriate operating tool to open the spring clamp. The specified insulation stripping length is 10–11 mm.
The terminal strip is designed for secure chassis screw mounting using suitable 3 mm diameter screw and nut hardware. Its compact 48 mm width, 35 mm depth and 22.3 mm height from the mounting surface make it suitable for organised electrical assemblies where reliable mechanical attachment and efficient space utilisation are important.
The black polyamide 66 insulating housing provides electrical insulation and mechanical strength, while its UL94 V-0 flammability classification supports use in demanding equipment applications. The halogen-free construction also makes the terminal strip suitable for projects requiring attention to the insulating materials used in electrical assemblies.
The WAGO 862-1504/999-950 carries ATEX component certificate PTB 03 ATEX 1189 U and IECEx component certificate IECEx PTB 05.0003 U. These certifications identify the product as a component suitable for specified increased-safety equipment applications, including the indicated Ex eb gas and mining protection classifications. The certificates have a U suffix, meaning they are component certificates rather than independent approvals for a complete hazardous-area installation.
For hazardous-area use, the finished electrical assembly must be designed and assessed according to the relevant certification conditions. This includes selecting a suitable certified enclosure, observing the electrical ratings, maintaining the required clearances and creepage distances, ensuring adequate mechanical mounting and applying the appropriate temperature and conductor requirements. Installation in a particular hazardous-area zone must be justified by the certification of the completed equipment.
The connector also supports WAGO 862-482 jumper accessories for suitable common-potential arrangements, as well as compatible marking strips and testing accessories. Built-in test points facilitate electrical testing, although the manufacturer's specified WAGO 210-136 test plug arrangement is limited to 42 V. The jumper configuration and testing method must remain compatible with the finished equipment's hazardous-area certification.
The WAGO 862-1504/999-950 is particularly suitable for electrical engineers, industrial automation specialists, process control equipment manufacturers and hazardous-area system designers. Its combination of spring-pressure connections, multiple conductor positions, chassis mounting and Ex e component certification makes it a valuable choice for suitably engineered industrial electrical installations.
For safe operation, all conductor connections and modifications must be carried out with the equipment safely de-energised. The connector must be installed in accordance with WAGO's instructions, the applicable ATEX or IECEx certification conditions and relevant electrical installation standards. Its hazardous-area suitability does not eliminate the need to assess and certify the complete equipment assembly where required.
Tick the specs you need, then view products that match.
| Current | 28 A | |
|---|---|---|
| Voltage | 440 V | |
| Colour | Black | |
| Connection | Spring clamp | |
| Product Series | WAGO 862 | |
| Connectable conductor cross section fine-strand with cable end sleeve | 0.75 – 2.5 mm² | |
| Height | 35 mm | |
| Operating temperature | 105 – 105 °C | |
| Number of poles | 4 | |
| Rated current In | 28 A | |
| Connectable conductor cross section fine-strand without cable end sleeve | 0.5 – 4 mm² | |
| Number of clamp positions per pole | 4 | |
| Rated voltage | 440 V | |
| Width | 48 mm | |
| Material insulation body | Thermoplastic | |
| Type of electrical connection 2 | Spring clamp connection | |
| Type of electrical connection 1 | Spring clamp connection | |
| Colour | Black | |
| Explosion-tested version 'Ex e' | Yes | |
| Connectable conductor cross section multi-wired | 0.5 – 4 mm² | |
| Connectable conductor cross section solid-core | 0.5 – 4 mm² | |
| Depth | 22.3 mm | |
| Mounting method | Other | |
| Manufacturer | WAGO | |
| Series | 862 Series | |
| Model | 862-1504/999-950 | |
| Product type | Chassis-mount terminal strip | |
| Product category | Ex-rated industrial terminal blocks | |
| Terminal configuration | 4-conductor, 4-pole | |
| Hazardous-area application | Ex e II increased safety | |
| Connection points per pole | 4 | |
| Total connection points | 16 | |
| Total number of electrical potentials | 4 | |
| Protective earth function | Without integrated PE contact | |
| Circuit designation | PE-N-L1-L2 | |
| Connection technology | Push-in CAGE CLAMP® | |
| Termination method | Screwless spring-clamp connection | |
| Actuation type | Push-button | |
| Operating tool compatibility | Yes | |
| Wiring direction | Side-entry wiring | |
| Nominal conductor cross-section | 4 mm² | |
| Solid conductor range | 0.5–4 mm² (20–12 AWG) | |
| Solid conductor direct push-in range | 0.75–4 mm² (18–12 AWG) | |
| Stranded conductor range | 0.5–4 mm² (20–12 AWG) | |
| Fine-stranded conductor range | 0.5–4 mm² (20–12 AWG) | |
| Fine-stranded conductor with insulated ferrule | 0.5–1.5 mm² (20–16 AWG) | |
| Fine-stranded conductor with ferrule, direct push-in | From 0.75 mm², subject to conductor characteristics and manufacturer requirements | |
| Conductor stripping length | 10–11 mm | |
| Connectable conductor material | Copper | |
| Rated voltage (EN, Ex e II) | 440 V | |
| Rated current (Ex e II) | 28 A | |
| Hazardous-area protection concept | Increased safety, Ex eb | |
| Gas protection marking | Ex eb IIC Gb | |
| Mining protection marking | Ex eb I Mb | |
| ATEX component certificate | PTB 03 ATEX 1189 U | |
| IECEx component certificate | IECEx PTB 05.0003 U | |
| Applicable hazardous-area standard family | IEC 60079 | |
| CCC hazardous-area certificate | 2020312313000178 | |
| EAC hazardous-area certificate | RU C-DE.AM02.B.00127/19 | |
| CSA approval standard | CSA C22.2 No. 158 | |
| CSA certificate | 1505030 | |
| Mounting type | Chassis screw mounting | |
| Mounting hardware | 3 mm diameter screw and nut | |
| Pole spacing | 12 mm | |
| Terminal strip width | 48 mm | |
| Height from mounting surface | 22.3 mm | |
| Terminal strip depth | 35 mm | |
| Housing colour | Black | |
| Insulating material | Polyamide 66 (PA66) | |
| Insulation material group | I | |
| Flammability classification | UL94 V-0 | |
| Halogen-free | Yes | |
| Component weight | Approximately 27.2 g | |
| Fire load | 0.503 MJ | |
| Testing provision | Built-in test points | |
| Compatible test plug diameter | 2 mm | |
| Test accessory voltage limit | 42 V for the specified WAGO 210-136 test plug arrangement | |
| Compatible jumper | WAGO 862-482 | |
| Compatible operating tool | WAGO 210-720 | |
| Compatible test plug | WAGO 210-136 | |
| Compatible marking strip | WAGO 709-177 | |
| Alternative marking strip | WAGO 709-178 | |
| ETIM classification | EC001284 | |
| eCl@ss classification | 27-14-11-06 | |
| RoHS compliance | Compliant, no exemption | |
| Manufacturer packaging quantity | 200 pieces | |
| Packaging type | Bag | |
| Country of origin | Germany | |
| Customs tariff number | 85369010000 | |
| GTIN | 4045454804152 |
The WAGO 862-1504/999-950 is a 4-pole chassis-mount terminal strip designed for industrial electrical connections, including appropriately certified Ex e increased-safety applications. It uses Push-in CAGE CLAMP® technology and provides 16 conductor connection points across four separate electrical potentials, making it suitable for industrial equipment, control panels and hazardous-area electrical assemblies that meet the applicable certification conditions.
The WAGO 862-1504/999-950 has 4 independent electrical poles, each containing 4 conductor connection points. This provides 16 connection points across four separate electrical potentials. The pole spacing is 12 mm. Although the product is associated with PE-N-L1-L2 circuit identification, it does not have an integrated protective earth contact.
The WAGO 862-1504/999-950 supports solid, stranded and fine-stranded copper conductors from 0.5–4 mm² (20–12 AWG). Direct push-in termination is specified for suitable solid conductors from 0.75–4 mm², while fine-stranded conductors with insulated ferrules are supported from 0.5–1.5 mm². The required conductor stripping length is 10–11 mm.
The WAGO 862-1504/999-950 has a 440 V rated voltage and a 28 A rated current under the manufacturer's specified Ex e II conditions. These ratings must be respected when selecting conductors and designing electrical equipment. Different WAGO 862 Series terminal strips may have other ratings, so the specifications for this exact Ex-rated model must be used.
Yes. The WAGO 862-1504/999-950 has ATEX component certificate PTB 03 ATEX 1189 U and IECEx component certificate IECEx PTB 05.0003 U, covering specified increased-safety applications. The certifications include Ex eb IIC Gb and Ex eb I Mb protection markings. These are component approvals, so the terminal strip must be incorporated into a suitably designed and, where required, certified complete assembly; the connector alone does not certify an entire hazardous-area installation.
WAGO 862 Series chassis-mount terminal strips are designed for dependable electrical connections in industrial equipment and control systems. The WAGO 862-1504/999-950 combines proven Push-in CAGE CLAMP® technology, 16 conductor connection points, secure chassis mounting, durable black construction and ATEX and IECEx component certification to support reliable, efficient electrical connectivity in appropriately engineered industrial and hazardous-area applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.