Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£5.38
The WAGO 770-099/K000-0006 is a professional 4-pole WINSTA® MIDI plug and socket connector set, supplied with strain relief housings and a locking lever for secure, detachable electrical connections. Designed for modular building installations, lighting systems and electrical equipment, this complete connector assembly provides a practical alternative to conventional hard-wired terminal connections.
Part of the established WAGO WINSTA® MIDI 770 Series, the connector set combines spring pressure conductor termination with a mechanically secure plug-and-socket interface. Its four-pole A-coded configuration, marked N, 2/L and 1/L', supports compatible mains wiring arrangements, while the mechanical coding system helps prevent incorrect mating with incompatible WINSTA® connectors.
With a 25 A rated current, 400 V nominal voltage and compatibility with conductors up to 4 mm², the WAGO 770-099/K000-0006 is suitable for a wide range of professional electrical installation applications. Its white insulating housing, integrated strain relief arrangement and locking lever help provide dependable electrical connections in building services and modular wiring systems.
The connector assembly measures 44.6 × 17 × 76 mm, with an overall length of approximately 135 mm when mated. Its compact construction and detachable connection system make it particularly useful where efficient installation, commissioning and subsequent equipment maintenance are important.
The WAGO WINSTA® MIDI system is designed to simplify electrical installation through pre-engineered pluggable connections. Instead of requiring conventional fixed terminal wiring at every equipment connection point, compatible plug and socket components can be prepared and connected as part of a structured modular wiring system. This approach is particularly useful in commercial lighting, building services and electrical equipment manufacturing.
The WAGO 770-099/K000-0006 provides both sides of a four-pole electrical connection in one set. Its spring pressure termination technology helps maintain dependable conductor contact, while the detachable connector interface enables compatible equipment to be connected or disconnected during installation and maintenance after the electrical supply has been safely isolated.
The included strain relief housings help protect the electrical termination points against mechanical forces transmitted through the connected cables. The specified 9–13 mm sheathed cable diameter range and 55 mm outer insulation stripping length support consistent cable preparation when assembling the connector set.
A key advantage is the locking lever, which provides mechanical retention between the mating connector halves. With a specified locked retention force exceeding 80 N, the connection is designed to resist unintended separation under normal installation conditions. The A-coded WINSTA® interface also helps prevent incorrect mating with incompatible connector types.
The connector housings are manufactured from PA66 polyamide, with a UL 94 V-0 flammability classification. Chrome-nickel spring steel clamping elements and tin-plated copper-based contacts contribute to the mechanical durability and electrical reliability of the connection system.
The connector has an IP2XC protection classification when correctly mated and secured with its strain relief housing. However, these compact connectors are not designed for installation in open, easily accessible areas. They should be installed within suitable electrical equipment or protected installation locations in accordance with applicable wiring regulations.
For safe operation, the complete assembly must be selected according to its applicable voltage and current ratings, conductor construction, cable diameter, environmental conditions and circuit protection requirements. WINSTA® connectors are intended for connection and disconnection under safely isolated conditions and should not be used as load-break switching devices.
| Manufacturer | WAGO |
|---|---|
| Product series | WINSTA® MIDI 770 Series |
| Manufacturer part number | 770-099/K000-0006 |
| Product type | Pluggable electrical installation connector set |
| Product configuration | Plug and socket with strain relief housings and locking lever |
| Number of poles | 4 |
| Connector coding | A |
| Potential marking | N, 2/L, 1/L' |
| Nominal voltage | 400 V |
| Rated current | 25 A |
| Rated impulse voltage | 6 kV |
| UL rated voltage | 600 V |
| UL rated current | 23 A |
| UL approval standard | UL 1977 |
| Connection technology | Spring pressure connection |
| Conductor cross-section range | 0.5–4 mm², depending on conductor construction |
| Connectable sheathed cable diameter | 9–13 mm |
| Outer insulation stripping length | 55 mm |
| Conductor entry direction relative to mating direction | 0° |
| Connector type | Plug and socket |
| Connection type | For conductors |
| Pin spacing | 10 mm |
| Locking mechanism | Locking lever |
| Strain relief | Strain relief housing |
| Mating force | Approximately 20–70 N, depending on configuration |
| Locked retention force | Greater than 80 N |
| Unmating force when unlocked | Approximately 20–70 N |
| Number of mating cycles | 200 without resistive load |
| Degree of protection | IP2XC when mated and secured with strain relief housing |
| Housing colour | White |
| Cover colour | Grey |
| Strain relief colour | White |
| Main housing material | Polyamide PA66 |
| Material group | I |
| Flammability classification | UL 94 V-0 |
| Clamping spring material | Chrome-nickel spring steel |
| Contact material | Copper or copper alloy |
| Contact plating | Tin |
| Width | 44.6 mm |
| Height | 17 mm |
| Depth | 76 mm |
| Dimensions (W × H × D) | 44.6 × 17 × 76 mm |
| Overall length when mated | Approximately 135 mm |
| Weight | Approximately 49.8 g |
| Primary application | General mains electrical installations |
The WAGO 770-099/K000-0006 is a four-pole WINSTA® MIDI plug and socket connector set used to create secure, detachable electrical connections in lighting installations, building services, modular wiring systems and electrical equipment.
Yes. The product is supplied as a complete plug and socket set, including strain relief housings and a locking lever for securing the mated electrical connection.
The connector set has four poles and uses the A-coded WINSTA® MIDI interface. Its conductor potential markings include N, 2/L and 1/L'.
The WAGO 770-099/K000-0006 has a 400 V nominal voltage rating and a 25 A rated current. Its UL 1977 ratings are 600 V and 23 A. The applicable rating depends on the relevant installation standard and operating conditions.
The WINSTA® MIDI connector system accommodates compatible conductors within the 0.5–4 mm² range. The precise permitted cross-section depends on conductor construction and the manufacturer's termination requirements.
The connector set is specified for sheathed cables with an outside diameter of 9–13 mm. The manufacturer's specified outer insulation stripping length is 55 mm.
The locking lever helps secure the plug-and-socket connection against unintended separation. The manufacturer specifies a locked retention force of greater than 80 N.
The WAGO 770-099/K000-0006 is a four-pole connector set, whereas the 770-099/K000-0005 is a three-pole connector set. Both belong to the WINSTA® MIDI 770 Series and are supplied with strain relief housings and locking levers.
Yes. The WINSTA® MIDI connector is designed for repeated mating and unmating, with a specified durability of 200 mating cycles without resistive load. Connection and disconnection must be performed in accordance with WAGO's instructions and with the electrical circuit safely isolated.
The connector assembly measures 44.6 mm wide, 17 mm high and 76 mm deep. The overall length of the complete plug-and-socket assembly when mated is approximately 135 mm.
WAGO WINSTA® MIDI connectors combine reliable spring pressure connection technology with modular plug-and-socket installation, mechanical coding and practical cable protection. The WAGO 770-099/K000-0006 provides electrical contractors, building services engineers and equipment manufacturers with a complete four-pole connector set for secure, efficient and maintainable electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.